User manual

ManualsBrandsVivitar ManualsBluetooth music receiversInfinite BH-C26

Vivitar® Inﬁnite BH-C26 Bluetooth® Headphones

User Guide

Thank you for purchasing the Vivitar® Inﬁnite BH-C26 Bluetooth® Headphones.

Introducon

With these headphones, you will enjoy listening to high quality music wirelessly using

Bluetooth® technology. Easily connect to any mobile phone for both conversaon and music

listening. It also pairs with other Bluetooth-enabled devices (Bluetooth V2.1+EDR speciﬁcaon

and HSP, HFP, A2DP and AVRCP proﬁles).

Speciﬁcaons

• Bluetooth Speciﬁcaon: V2.1+EDR

• Operaon Frequency: 2.402-2.48GHz

• Supported Proﬁle: HSP, HFP, A2DP, AVRCP

• Operaon Range: Up to 33 feet (10 meters)

• Talk Time: 4 hours

• Play Time: 3 hours

• Standby Time: 7 hours

• Baery Type: 120mAh, 3.7V, Polymer Lithium Ion Baery

• Charge Time: 2 Hours

In the Box

• BH-C26 Bluetooth® headphones

• USB Charging Cable

• User Manual

Safety Precauons

• Please read this User Manual carefully and follow all instrucons.

• To avoid damage or malfuncon of the headphones do not drop them from high locaons

and/or on to hard surfaces, do not place heavy objects on them.

• Keep headphones away from humidity, water and other liquids. If they get wet, do not

operate as this may cause an electrical shock, explosion and damage to the device or to the

user.

• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves

or any other apparatus that produces heat. This may cause an explosion, degrade the

performance and/or reduce baery life.

• Do not modify, repair or disassemble device (especially the baery). Doing so will void the

warranty. The baery in this device may present a risk of ﬁre or chemical burns if misused or

tampered with.

• Use only supplied and manufacturer-approved chargers and unplug this device when not in

use for long periods of me or during lightning storms.

Summary of content (5 pages)

PAGE 1
Vivitar® Inﬁnite BH-C26 Bluetooth® Headphones User Guide Thank you for purchasing the Vivitar® Inﬁnite BH-C26 Bluetooth® Headphones. Introduction With these headphones, you will enjoy listening to high quality music wirelessly using Bluetooth® technology. Easily connect to any mobile phone for both conversation and music listening. It also pairs with other Bluetooth-enabled devices (Bluetooth V2.1+EDR speciﬁcation and HSP, HFP, A2DP and AVRCP proﬁles). Speciﬁcations • Bluetooth Speciﬁcation: V2.
PAGE 2
FCC and IC Statement Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modiﬁcations to this equipment. Such modiﬁcations could void the user's authority to operate the equipment.
PAGE 3
First Time Use Charging the Battery The BH-C26 Headphones have a built-in, rechargeable lithium-polymer battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is achieved after two or three charging-discharging cycles. Charge the battery fully before ﬁrst use. 1. Connect the USB cable to the headphones. 2. Connect to the correct outlet (wall, computer, car charger). 3. When the charger is connected to the headphones, the red indicator light will turn on.
PAGE 4
General Operation Turning ON/OFF 1. Press and hold the POWER button for three (3) seconds to turn the headphones ON. If pairing was successful (instructions above), the headphones will remain paired to your mobile device. 2. Press and hold the POWER button for seven (7) seconds to turn the headphones OFF. Note: The headphones will turn OFF automatically when not connected to a mobile device for approximately ten (10) minutes.
PAGE 5
• Supplier's responsibility shall be limited to the repair or replacement of the product at its sole discretion. • Speciﬁcally exempt from any warranty are limited-life consumable components subject to normal wear and tear such as batteries, decorates and other accessories. • Supplier is not responsible, for failure resulting from accident, abuse, misuse, or any unauthorized repair, or modiﬁcation.