User's Manual

ITEM:VZ80011BT
USER’S MANUAL
Using Your Bluetooth Headphones
A Quick Look at Your Bluetooth Speaker
FRONT VIEW
REAR VIEW
Charging Your Bluetooth Speaker
Pairing Your Bluetooth Speaker
Using Your Bluetooth Speaker
Charging PortAuxilliary Port
LED Indicator Light
Volume -/Previous Track
Mode
USB Port*
Power Switch
Charging Indicator Light
TF Card Reader**
Volume +/Next Track
Charging takes approximately 4 hours. Unplug when charging is complete.
Important: To avoid a complete discharge of the battery, charge your headphones at least once every six months.
1. The included USB charging cable
has a Micro USB plug and a standard
USB plug.
2. Insert the USB charging cable’s
Micro USB plug into the charging
port on your speaker.
3. Insert the USB charging cable’s
standard USB plug into the USB
ports of a computer or suitable
USB charging adapter.
Micro USB
Plug
USB
Plug
(red) = Charging
(o) = Charging
Complete
4. The charging indicator light turns red while the
speaker is charging. It turns o once charging is
complete.
1. Slide the power switch to the ON
position to power on your speaker.
3. Go to the Bluetooth settings
menu on your phone. Make sure
that Bluetooth is turned on.
Connect to the device listed as
“VZ80011BT Speaker”
2. The LED indicator light will
turn red and ash to indicate that
your speaker is in pairing mode.
Pairing Mode
Red
Flashing LED
VZ80011BT
Speaker
Slide
Paired
Red
4. The LED indicator light will stop
ashing and remain red to indicate
that your speaker is paired with your
phone. Note that the light will blink
slowly anytime music is playing.
Powering Your Headphones On and OFF
1. Press and hold the power button in order to power on your headphones. If you have paired your headphones to your Bluetooth device previously, they will automatically
remain paired each time you power on your headphones.
2. Press and hold the power button in order to power o your headphones.
Listening to Music
• Play/Pause Button : Press to play or pause a track.
NOTE: You can adjust volume and playback settings on your phone or connected audio device.
Using the Phone Function
• Answering a Call: Quickly press the Answer button to answer an incoming call.
• Ending a Call: Quickly press the Answer Call button to end a call.
Auxiliary Input Mode
To use your headphones with devices that are not Bluetooth enabled, plug one end of a standard 3.5mm audio cable into the Auxiliary Port on your headphones. Plug the
other end into the headphone jack on your audio device.
Powering Your Speaker On and OFF
1. Slide the power switch to the ON position or OFF position to power your speaker on or o. If you have paired your speaker to your Bluetooth device previously, they will
automatically remain paired each time you power on your speaker.
Listening to Music
• Volume -/Previous Track Button : Tap to go to the previous track in a playlist. Press and hold to decrease volume.
• Volume +/Next Track Button : Tap to go to the next track in a playlist. Press and hold to increase volume.
(button capabilities may be limited when in modes other than Blutooth mode)
Auxiliary Input Mode
To use your speaker with devices that are not Bluetooth enabled, plug one end of a standard 3.5mm audio cable into the Auxiliary Port on your speaker. Plug the other end
into the headphone jack on your audio device.
Mode Button
Press repeatedly to toggle between modes. In Bluetooth mode the speaker will play music from bluetooth sound source. In AUX mode you can listen to audio from a device
connected to the Auxilliary Port. In TF Card mode, you can listen to music les from a memory card inserted into the TF card slot. In USB mode, you can listen to music les
from a thumb drive inserted into the USB port. Lastly the FM radio mode allows you to listen to available FM radio stations. When in FM mode, the + and - buttons toggle
through stations.
Microphone
**The TF Card Reader can read TF
or Micro SD memory cards up to
32GB in size. Your speaker can play
.MP3, .WAV or .FLAC music les
stored on your memory card.
*You can insert most thumb
drives or jump drives into the USB
Port. Your speaker can play .MP3,
.WAV or .FLAC music les stored
on your drive. Note that the USB
port cannot be used to charge your
electronic devices.