SR1520 Outdoor Wireless CPE/Client Installation and User Guide Version 0.01 4931 NORTH 300 WEST PROVO, UT 84604 T: 801.377.9111 F: 801.377.
SR1520 Installation and User Guide Page 2 Record of Changes Manual Version / Date Description 0.01 Jan 29, 2015 Preliminary version SR1520 Installation & User Guide Ver. 0.
SR1520 Installation and User Guide Page 3 Notices This product contains software proprietary to Vivint and protected by US and International copyright law. Unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited. The software and methods implemented in this product may be protected by US Patents: Patent Application Number Jurisdiction of Grant DYNAMIC ROUTING WITHIN A WIRELESS MESH NETWORK 61/794,869 U.S.
SR1520 Installation and User Guide Page 4 Increase the separation distance between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC Part 15 of the FCC Rules.
SR1520 Installation and User Guide Page 5 Copyright SR1520 Outdoor Wireless Client Router, Installation and User Guide, Version 0.01 © 2013. Vivint Wireless All right reserved. SR1520 Installation & User Guide Ver. 0.
SR1520 Installation and User Guide Page 6 TABLE OF CONTENTS 1.0 INTRODUCTION 1.1.1 DATA RATES 1.1.2 RADIO PATH PLANNING 1.1.3 DEVICE HEIGHT 1.1.4 ANTENNA POSITION AND POLARIZATION 1.1.5 RADIO INTERFERENCE 1.1.6 WEATHER CONDITIONS 1.2 ETHERNET CABLING 1.3 GROUNDING SYSTEM SETUP 1.4 ADMINISTRATION 1.4.1 ADDING USERS & CHANGING PASSWORD 1.4.2 UPGRADING FIRMWARE 1.5 SYSTEM LOG 1.5.1 ENABLING SYSTEM LOGGING 7 7 8 9 9 10 10 10 11 13 13 13 13 13 13 HARDWARE INSTALLATION 14 2.1 BEFORE INSTALLING 2.1.
SR1520 Installation and User Guide Page 7 1.0 Introduction The Vivint SR1520 is an 802.11n beamforming indoor/outdoor-rated wireless client (CPE) router is designed for the deployment of advanced IEEE 802.11 wireless services in harsh environments. SR1520 is a POE device. The SR1520 devices are NOT sold through authorized or non-retail distribution channels. They are installed and commissioned professional Vivint Installer / Qualified Network Administrator.
SR1520 Installation and User Guide Page 8 The range also depends on the type of antenna used. The maximum data rate for a link decreases as the operating range increases. When planning a wireless router link, take into account the maximum distance and data rates for the various antenna options. . 1.1.2 Radio Path Planning The wireless router link requires a “radio line of sight” between the two antennas for optimum performance.
SR1520 Installation and User Guide Page 9 Avoid any partial line of sight between the antennas Be cautious of trees or other foliage that may be near the path, or may grow and obstruct the path Be sure there is enough clearance from buildings and that no building construction may eventually block the path Check the topology of the land between the antennas using topographical maps, aerial photos, or even satellite image data (software packages are available that may include this information for
SR1520 Installation and User Guide Page 10 1.1.5 Radio Interference The avoidance of radio interference is an important part of wireless link planning. Interference is caused by other radio transmissions using the same or an adjacent channel frequency. You should first scan your proposed site using a spectrum analyzer to determine if there are any strong radio signals using the 802.11a/n channel frequencies.
SR1520 Installation and User Guide 1.3 Page 11 Grounding It is important that the wireless router, cables, and any supporting structures are properly grounded. The wireless router unit includes a grounding screw for attaching a ground wire. Be sure that grounding is available and that it meets local and national electrical codes. SR1520 Installation & User Guide Ver. 0.
SR1520 Installation and User Guide Page 12 CPE SR1520 The installation sequence is given below. SR1520 Installation & User Guide Ver. 0.
SR1520 Installation and User Guide Page 13 1. Mount the CPE on its fixture without touching the pins of the Radio RJ45 connector. 2. Patch cable from radio to Citel - Make a shielded CAT5e cable such that its shielding foil is grounded to the metal shielding of the RJ45 connectors at either end as shown in slide#10 3. Connect one end of the cable to the radio and the other end to the “IN” port on the Citel surge suppressor 4.
SR1520 Installation and User Guide Page 14 2.0 Hardware Installation The SR1520, is a wireless Client device is designed to be deployed outdoors, exposed to all elements (extreme heat or sun, rain, snow, ice, cold) and mounted on a wall, pole, or mast. The SR1520 is supplied complete with its own mounting hardware kit for attaching the unit to a 1-2.5” diameter metal pole or tube or as part of a radio mast or tower structure. The supplied SR1520 48V power supply is suitable for outdoor use.
SR1520 Installation and User Guide Page 15 Due to the typically inaccessible location often best suited to deploying an outdoor wireless router (for example, on rooftops, sides of buildings, or on a radio tower) it is recommended that the network administrator pre-provision the SR1520 system to be installed (taking note of settings, passwords, Channel, MAC and IP addresses) prior to physical installation, and confirm that the device is fully operational and free from fault. 2.1.