SOUND VIEW SERIES USER MANUAL
02 SOUND VIEW SERIES | contents CO NTE NT S VIVID MODELS » » » » VFS492SVS VFS4106SVS VFS4120SVS VFS4133SVS
SOUND VIEW SERIES | contents INTRODUCTION 04 · copyright · i ncluded in box · t ools needed PRECAUTIONS 06 · attention · environmental conditions · cautions ASSEMBLY · i nstallation · how to uninstall 08 03
04 SOUND VIEW SERIES | introduction I NT R OD U CT IO N Dear Customer! Congratulations on making your purchase. We hope you enjoy using your new projection screen. In order to make each viewing a unique video-cinema experience, we have provided this user manual containing detailed information about installing and operating your new projection screen. Be sure to read through all the information in this manual before using and/or attempting to install the equipment.
SOUND VIEW SERIES | introduction 05 Included in Box: · Horizontal Frames (2) · Vertical Frames (2) · Corner Brackets (4) · Top Mount (1) · Bottom Mount (1) Horizontal Frames & Vertical Frames Corner Brackets Top Mount Bottom Mount Horizontal Tension Bars Vertical Tension Bars 10mm Corner Screws Tension Pegs · Horizontal Tension Bars (2) · Vertical Tension Bars (2) · 10mm Corner Screws (16) · Tension Pegs · Fabric Tools Needed: Electric Drill, Level, & (8) Screws Suitable for Wall Type
06 SOUND VIEW SERIES | precautions PR E CA U T I ON S Attention: Fix Frame Screen consists of a light-weight aluminum frame. Handle it with care to avoid damage. When not in use, cloth or curtain can be used to cover the screen to avoid dirt or foreign objects. When cleaning the screen fabric, please use soft cloth with little clean water. No cleaning agents shall be used. Please do not touch the fabric with fingers or sharp edge like a blade. Do not hang anything on the frame.
SOUND VIEW SERIES | precautions 07 Cautions: The screen should be mounted indoors. Please make sure that the wall structure can support the weight and is suitable for installation. No Moisure Keep Distance Wall Mounted Installation No Heavy Objects Level Frame Only For Adults Please make sure that screen is level after installation. This installation process can only be performed by adult.
08 SOUND VIEW SERIES | assembly A SS E M B LY 1. Lay each section of the frames on a tidy, flat surface. (Fig. 1) 2. Slide tension pegs into grooves on the reverse side of frames. (Fig. 2-3) 3. Connect both horizontal and vertical frame sections with the corner brackets. Ensure all joints are square and then tighten the 10mm corner screws. (Fig.
SOUND VIEW SERIES | assembly 4. Unfold the screen fabric and insert the tension bars into the perimeter slots of the fabric. Make sure the smooth white surface (no seams) is facing forward. (Fig. 8-10) 09 5. Align tension pegs with eyelets on the Fabric. Using the tension bar, pull the fabric over the tension pegs making sure the bar is on the back side. (Fig. 11-15) Installer’s Tip: Arrange horizontal tension bars first, then the the sides.
SOUND VIEW SERIES | assembly 6. There is a locking latch on the bottom wall mount only. (Fig. 16) 7. Fix the mounts onto the wall separately. (Fig.
SOUND VIEW SERIES | assembly 8. Hook screen onto the top mount and bottom mount. (Fig. 19-20) Fig 19 Fig 20 11 9. To uninstall the screen, please press the latch towards the wall to release bottom frame from bottom mount. Then, lift the screen a little to release it totally from top and bottom groove of the mounts. (Fig.
Ma k e a Splas h! W W W. S K Y WA L K E R . C O M 9390 VETERANS MEMORIAL PKWY, O’FALLON, MO 63366 | 800.844.
