Safety Instructions Safety information For your safety, please read the following instructions prior to the use of the phone. Violation of the following instructions is illegal and dangerous. Advice for safety and maintenance of the device - Do not try to disassemble or repair the mobile phone. - Keep it from humidity and moisture. - Do not use strong detergents or harmful chemicals to clean the device. Use a smooth cloth instead. - Do not apply strong impact on the device.
Technology S.A. may void the user’s authority to operate the equipment. Class B digital devices regulatory notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
contact with the antenna during normal operation is minimized. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the Vitelcom accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. SAR levels measured for this phone are 0.478 W/kg for use at the ear and 1.
The range standard is to search for safety of all regardless of age or health state. Standard value exposed of the mobile phone is displayed in “Specific Absorption Rate” (SAR) unit. The SAR range (limit) that EU council recommends is 2.0w/kg. Based on the mobile functions, SAR test will be performed, and then the mobile sends the maximum output at the certified frequency. Its maximum output will be measured in SAR, but the level of the usual SAR will be far less than the maximum value.
And follow the related laws in your country. Before answering the phone or making a call, stop the car in a safe place. In case of emergency, please keep in mind the following instructions before using the mobile phone: Concentrate on driving only. Remember your safety is the first policy. The hand-free device if needed shall be installed by an authorized person.
The mobile phone may also interrupt functions of some kinds of microphones. In this case, contact the maker of the microphones to look for a breakthrough. Radio frequency sign this mobile phone produces may have an effect on electric devices of vehicles (airbag, brake, etc.). Contact the maker for details. Battery and parts This mobile phone uses the rechargeable battery of Lion technology. A fully charged battery can be used for 140~240 minutes for calling service and for 80 hours in the stand-by state.
Telephone 1. On/Off button Press ( ) button to turn the mobile phone on or off. Press this button to finish the call. If the button is pressed for long, you will be back to the previous screen from the present screen where a certain menu is applied. 2. Move button Keep pressing ( ) button to move to the mobile phone menu. Press Move button downward to display the menu where SMS message can be sent. On the basic screen press Move button upward to display the call records. 3.
Introduction Installation of SIM card Prior to installation of SIM card, make sure the mobile phone is powered off and then remove the battery. Since the SIM card can be easily damaged if scratched or bent, be careful when installing on or removing from the phone. 1. Let the back of the phone directed toward the user, and press the open lever (as pointed by the arrow in the figure). The battery is put together with the cover as a single unit. 2. Take the battery out as shown in the figure. 3.
Charging the battery 1. Insert the charger as shown in the figure. (The phone is available during charging the battery.) If the mobile phone is turned off, the sign “Battery being charged” will be displayed continuously. 2. If the battery is charged, it will not blink as in the figure of the screen. In order to remove the battery, hold and press the both ends of the charger to take out.
Phone ON/OFF In order to turn the phone on or off, keep pressing ( ). Main screen Ref) For 10 seconds after the phone turned on, its image and menu may be displayed later than usual, which is because the menu setting environment needs such time when the menu is not visible. After this period of time, the speed will be back to normal condition. Stand-by screen is displayed if the phone is ready to answer and make the phone call. The stand-by screen is divided into 4 icon areas.
Press the number you want to make a call to and then press Call button. Keep pressing a number button where a phone number is saved and set with speed dial if you want to make a call thereto. Keep pressing Keep pressing Press number message box. * button to set the manner mode # button to lock 1 button on the basic screen to make a call to voice Make a call In order to make a call, press the number on the stand-by screen and then press Call ( ) button.
Basic menu In the stand-by state, press Menu button to go to the basic menu. The basic menu includes details of Menu with all available functions. Press Up/Down Move button to go to the desired type of menu. In addition, with the menu button being pressed, press the applicable number to go to the category for the number. Figures of icons, names of categories and description of each menu and shortcut buttons are as follows; Lock keypad Keep pressing ( ) the button to lock the keypad.
Phonebook Press Menu button on the Idle screen to go to the Main menu and select Phonebook The phone has two different directories. 1. SIM card directory 2. FDN directory (Fixed Dialed Number) For more information on FDN directory, refer to Chapter . SIM directory is composed of the following items. • 14-character name • 20-digit number 50 FDN phone numbers can be saved in the SIM directory of the phone. New save Names and phone numbers can be saved in the SIM directory.
If the Phonebook is not empty 1. Press Option button on the Phonebook menu. 2. Move to the new item and Press Select button. 3. Input the name and Press Select button. 4. Input the desired phone number along with its applicable district number and then press Select button. If the Phonebook is empty 1. Press New on the Phonebook menu and press Select button. 2. Input the name and press Select button. 3. Input the phone number and press Select button.
View Phonebook details Specific details of the directory are available as specified below; 1. Select the Phonebook menu. 2. The list of names will be displayed on the Phonebook menu. 3. Use the move keys to select a desired item and then press Option button. 4. Select details item and then press Select button. Names and phone numbers will be displayed. Use the move keys to go to the next item from the directory. Ref) Press End button to return to the main screen.
Edit items 1. Select the Phonebook menu. 2. The name list will be displayed on the Phonebook menu. 3. Select a desired item to edit and then press Option button. 4. Press Select button on the details item. 5. Press Option button on the details screen. 6. Move to Edit item and then press Select button. 7. Edit the name and then press Select button. 8. Edit the phone number and then press Select button. Make a call from the Phonebook 1. Select the directory menu. 2.
Send a text message through the selected item 1. The name list will be displayed on the Phonebook menu. 2. Use the move keys to select the name to send a message to. 3. Press Option button and move up to Send message item. 4. For more information on Send text message, refer to Send a new text message. Delete one item in the Phonebook 1. Select the Phonebook menu. 2. Press Option button. 3. Select delete and then press Select button. 4. Confirmation window will be displayed. 5. Press YES button.
Calls You can refer to information of previously Missed calls, received calls and Dialed calls. Press Menu on the basic screen to move to the Calls menu and then press Select button. Missed Calls 10 missed calls are saved in the Missed calls list. Select the Missed calls to display the list of calls that you were in absent. View Missed call in details You can find details of name, number, calling time, date and time. • Use the move keys to go to the Missed call list and press Select button.
• Move to the selected number and press Option button. • Use the move keys to go to Save item and press Select button. Delete the Missed call list number You can delete one or all numbers from the Missed call list. Delete all numbers from the Missed call list • Press Select button on the list menu. • Move to Delete item from the call list and press Select button. • Select Delete the missed calls on the list and press Select button.
Make a call from the received call list • Use the move keys to go to the received call list and press Select button. Go to the desired number and press Call (green) button. Save the received call list number in the directory • Use the move keys to select the received call list number. • And press Option button. • Use the move keys to go to Save item and press Select button. Delete the received call list number You can delete one or all numbers from the received call list.
Dialed Calls 10 calls in absence are saved in the Dialed call list. Select the Dialed call list on the call list menu to display the list of calls you have sent. View Dialed call details You can find details of name, number, date and time of the received calls. • Use the move keys to go to the dialed call list and press Option button. • Go to the details item and press Select button. Make a call from the Dialed call list • Use the move keys to go to the dialed call list and press Select button.
Clear Call Log • Select Delete call list on the list menu. • Use the move keys to select Delete all the list and press Select button. • If the confirmation window is displayed, press Select button to delete all the call records on the list. Call Settings It is the menu that can change the option about Call. Call Waiting This service is used to make other call stand by while a precedent call is connected, which can be applied or cancelled as necessary.
menus as follows ▪ All calls: cancels all the previous options if all the type of calls received is specified. ▪ Busy: receives all calls selected even during you are connected with other phone. ▪ No answer: The service provider shall specify the number of bells to make In-absence mode active if call is not answered. ▪ Unreachable: receives all calls sent even if out of service area. 1. Press Menu button on the basic screen and move to Settings menu. And press Select button. 2.
* Change Password: In order to change password for call barring, select change password option and press Select. then input the correct existing password first and then new password twice(it is to confirm that the new password is correct). 1. Press Menu button on the basic screen and move to Settings menu. And press Select button. 2. Move to Call settings menu Select button. 3. Go to Call Restriction menu and press Option button. 4. Select the desired option and press OK button.
Auto redial It redials automatically if the receiver doesn’t answer the call for 20 seconds. 1. Press Menu button on the basic screen and move to Settings menu. And press Select button. 2. Move to Call settings menu and press Select button. 3. Move to Auto redialing menu and press Select button. 4. Select the desired option and press OK button. Minute Minder It alerts to user for every minutes when using the phone call. 1. Press Menu button on the basic screen and move to Settings menu.
Press Reset button to initialize the calling time of the Last call and Received/Dialed calls. If the confirmation window is displayed, press Yes button to restart the gauge.
Messages New Message 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Move to New Message from the message menu and then press Select button. 3. Input the desired number or use the directory button to find the number to input. Move to the desired item and then press Select button. Press Select button. And its edit is available before pressing Select button. 4. Select a commonly used message expression on the list and press Select button.
Received Message ( ( Received box is a place where all the received messages (SMS) are received and saved, which includes the list of received messages. The list displays the icon for message status (read, not read) and the number of the sender. Icons used to display message status in the received box are as follows; )This icon shows that the message in the received box is not read yet. )This icon shows that the message in the received box has been read.
Voice mail It connect to Voice mail box directly Settings Through the environment setting menu of the message box, you can specify the number of the text messages in the box and change the term of validity of messages. It contains Center number, Reply path, Status report, Memory and Erase messages. 1. Press Menu button on the basic screen and move to Messages menu. And press Select button. 2. Move to Settings menu Select button. 3. Select the desired option and press OK button.
CB Message It is the Broadcasting Message service from operators. 1. Press Menu button on the basic screen and move to Messages menu. And press Select button. 2. Move to CB Message menu Select button. 3. Select the desired option and press OK button. Reception You can select whether you want to receive the CM message or not. Channels You can chose the channel which you want to receive. If there are no channel using, you can add manually.
STK With this menu, you can use various function which operators offered.
Entertainment 3 games of Snake, Repetez and Video Poker are available through this menu. 1. Move to Tools menu to go to the game menu. 2. Go to Game and press Select button. How to enjoy the games Snake: Use the numbers 2, 8, 4 and 6 to move the snake up and down, to the left and right. Guide him to eat the food. Be careful not to hit the wall or the snake itself. Repetez: Follow and repeat a series of keys specified by the phone.
Tools Calendar Various kinds of alarms are available for this phone. If an alarm bell rings at a specific time, a message will be displayed on the phone. 1. Press Menu button on the basic screen to move to Tools menu and press Select button. 2. Go to the calendar and press Select button. 3. Press Select button on Event item. 4. Press Add. 5. Select Alarm option (or desired type of event). 6. Input the desired message and press Select button. 7. Input the desired alarm time and press Select button. 8.
Add more events 1. Press Menu button on the basic screen to move to Tools menu and press Select button. 2. Go to the calendar and press Select button. 3. Press Option button. 4. Go to Event add item and press Select button. 5. Select the desired type of event. Go to the specific date on the calendar 1. Press Menu button on the basic screen to move to Tools menu and press Select button. 2. Press Select button on the calendar. 3. Press Option button on Event item. 4. Press Select button on Go to item. 5.
You can check the whole calendar to see the specified events. View the whole calendar 1. Press Menu button on the basic screen to move to Tools menu and press Select button. 2. Go to the calendar and press Select button. 3. Select View date item. 4. Press Next button if you want to move forward on the calendar. Press Previous button if you want to move backward on the calendar. View the date only with event on the calendar 1.
1. Press Menu button on the basic screen and select Tools menu. 2. Move to Calculator through the menu and press Select button. 3. Input the first digit. 4. Use the move keys to select +, -, x or / and press Select button. 5. Input the second digit. 6. Press button. Ref) Use «*» button to change the sign. Ref) Use «#» button to input the decimal point or comma.
Local It is the option to set the city of Local place and Local DST(Daylight Saving Time). 1. Press Menu button on the basic screen to move to E-book and press Select button. 2. Go to World time and press Select button. 3. Press Environment setting button. 4. Move to Local setting item and press Select button. 5. Move to Standard city setting item and press Select button. 6. Select the desired standard city and press Select button. Date format It is the option to set the Date format D/M/Y, M/D/Y or Y/M/D.
Settings Change menu makes you change and check the value specified in the phone. My movistar • Sound - The volume of bell and sound can be changed and displayed. The sound of bell, message, key, error or connection can be available or unavailable. • Alert Mode - One of the notice modes provided by the phone can be selected. Bell, vibration, bell & vibration, mute • Call - The basic value related with the mobile phone calls can be specified.
Ringer Tone With this menu you can choose desired Tone using for incoming call sound. 1. Press Menu button on the basic screen and move to Setting menu. And press Select button. 2. Select My Movistar menu. 3. Go to Sound item and press Select button. 4. Go to Ringer tone item and press Select button. 5. Use the move keys to select the bell sound as desired and press Select button. Message tone With this menu you can select whether to use the Message sound or not. 1.
Connect tone With this menu you can select whether to use the Connect sound or not. 1. Press Menu button on the basic screen and move to Change menu. And press Select button. 2. Select My Movistar menu 3. Go to Sound item and press Select button. 4. Go to Connect tone and press Select button. 5. Select the desired option and press Select button.
Alert Mode 1. Press Menu button on the basic screen and move to Setting menu. And press Select button. 2. Select My Movistar menu 3. Move to Alert mode item and press Select button. 4. Functions available in Notice mode are as follows; Ring Only - The speaker of the phone makes a sound. Vibrator - No sound, vibration only. Ring / Vibrator - The speaker of the phone makes a sound with vibration. Silent - The bell mode is canceled. No sound will be alerted. 5.
Languages The option is used to change the languages displayed on the phone menu. 1. Press Menu button on the basic screen and move to Setting menu. And press Select button. 2. Select My Movistar menu 3. Move to Languages item and press Select button. 3. Go to the desired languages item and press Select button. If an automatic option is selected, the languages will be identified through SIM card. Keypad Lock You can lock the keypad with following the below.
PIN Lock You can Lock the SIM with this menu. 1. Press Menu button on the basic screen and move to Setting menu. And press Select button. 2. Select Security menu 3. Move to PIN Lock item and press Select button. 3. Go to the desired option and press Select button. Change PIN1 In case you don t like the password 1 which was input in your phone, you can easily change it. 1. Press Menu button on the basic screen and move to Setting menu. And press Select button. 2. Select Security menu 3.
The PIN2 is used in FDN. FDN(Fixed Dialed Number) Restricted call list is used to restrict the call only to specific phone number. 1. Press Menu button on the basic screen and move to Setting menu. And press Select button. 2. Select Security menu 3. Move to FDN item and press Select button. 4. Enter PIN2 to enable the FDN. 5. Enter the number which you shall use for FDN. SIM Lock Lock SIM card is used to keep the phone from robbed.
Call settings You can change the call setting in this menu such as Any key Answer, Auto Redial and Minute Minder. Call waiting This service is used to make other call stand by while a precedent call is connected, which can be applied or cancelled as necessary.
1. Press Menu button on the basic screen and move to Settings menu. And press Select button. 2. Move to Call settings menu Select button. 3. Go to Call forwarding menu and press Option button. 4. Select the desired option and press OK button. Call Restriction This makes calls be sent and received only under the specified conditions. Select this option on menu to make use of this service.
Caller ID This will let you know the number and the name from which call is sent. In order to apply this function, select Confirm sender option on call service menu and press Select to display the following options; * Show caller: shows sender s phone number * Hide own: hides my phone number for its receiver not to see. 1. Press Menu button on the basic screen and move to Settings menu. And press Select button. 2. Move to Call settings menu and press Select button. 3.
Minute Minder It alerts in every 1 minutes, to let user to now the used call time. 1. Press Menu button on the basic screen and move to Settings menu. And press Select button. 2. Move to Call settings menu Select button. 3. Go to Minute Minder menu item and press Option button. 4. Select the desired option and press OK button. Speed dialing You can use one touch dialing by setting Speed dialing 1. Press Menu button on the basic screen and move to Settings menu. And press Select button. 2.
Reply path It is the function that whether to use other SMS center. 1. Press Menu button on the basic screen and move to Settings menu. And press Select button. 2. Move to Messages settings menu Select button. 3. Go to Reply Path menu item and press Option button. 4. Select the desired option and press OK button. Status report It reports to the user if the receiver received the SMS. 1. Press Menu button on the basic screen and move to Settings menu. And press Select button. 2.
Time & Date By this menu you can change the desired time and date and each format. Date With this menu you can change to desired Date. 1. Press Menu button on the basic screen to move to Settings and press Select button. 2. Go to Time & Date and press Select button. 3. Move to Date and press Select button. 4. Change to desired Date and press Select button. Date format It is the option to set the Date format D/M/Y, M/D/Y or Y/M/D. 1.
Time format It is the option to set the Time format 24hour or 12hour. 1. Press Menu button on the basic screen to move to E-book and press Select button. 2. Go to World time and press Select button. 3. Press Environment setting button. 4. Move to Time format item and press Select button. 5. Select the desired time format and press Select button. Reset Settings This option allows the user to make use of the original value the phone had before 1. Press Menu button on the basic screen and move to Change menu.
SIM service : STK(Movistar Menu) Ask your communication network provider if this service is available. Movistar menu lets you use this service without an additional statement how to use. Finding out a place good for eating-out presently including its address and phone number is as easy as you read the today’s fortune in the paper. All of these are as fast menus as you select a desired option from the Movistar menu.
2424 services This option provides all the personnel services as described below; * Secretary * Commercial information, RUT consultation * Check distance & position * Consultation on the phone * Movies billboard * Check location of (applicable) drugstores * Check location of ATM * Check flight time * Tractors * Check location of gas stations *Restaurants Leisure You can check all other function services updated daily.
Emergency It lets you directly connect to ambulance service, fire station or police station. Movistar 210-en.05 Ref) The details of this manual are regarded as correct at the moment when printed. However, its provider reserves the right to change its specific details and functions without prior notice. Some functions and details described in this manual can be modified, based on the communication network environment or on the functions of the software installed on SIM card phone.
Exception of quality warranty This warranty will be void in the following cases; 1. In case the product is misused or used for other purposes than specified in the present safety standard of its applicable country, or any instruction described in the manual is violated. 2. This warranty does not include normal defects unavoidable during use. 3. This warranty does not include normal defects unavoidable on plastic, paint, key pad or antenna. 4.
- 61 - Official Seal Address Name Dealer Information Guaranteed for a period of one year after the date of purchase. ESN/IMEI Purchase Date Product No. Manufacturing No.