User Manual

ManualsBrandsVitek ManualsElectronics3Mp Outdoor IR Network Vandal Dome

VITEK

FEATURES

• 1/3” 2.1 Megapixel Progressive Scan CMOS image sensor

• 2.1 MegaPixel Video Transmission over COAX cable at

distances of up to 1500’ using HD-TVI Technology*

• 2.8~12mm Varifocal Lens

• 30 Infrared LED’s with 100’ IR Range

• Digital Wide Dynamic Range (D-WDR)

• True Mechanical Day/Night function by ICR

• 3D-DNR Noise Reduction

• IP66 Weather Resistance

• 12VDC Operation

VTD-TTD30R2V

2.1 Megapixel Vandal Resistant

HD-TVI IR Dome Camera

Summary of content (8 pages)

PAGE 1
VTD-TTD30R2V 2.1 Megapixel Vandal Resistant HD-TVI IR Dome Camera VITEK VITEK FEATURES • 1/3” 2.1 Megapixel Progressive Scan CMOS image sensor • 2.1 MegaPixel Video Transmission over COAX cable at distances of up to 1500’ using HD-TVI Technology* • 2.
PAGE 2
Safety Precaution To prevent electrical shock and risk of fire hazards, do not expose this unit to rain or moisture and only use specified power source.. CAUTION: TO REDUCE THE RISK OF ELECTICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
PAGE 3
Components and Accessories Camera Screws User Manual Hex Wrench Drill Template Overview 3 4 2 5 6 7 1 8 1 Lower Dome 5 2 Lens 6 Zoom 3 Video Cable 7 Lock Screw 4 Power Cable 8 Mounting Base 3 Focus
PAGE 4
Video Connection Connect the video connecter to a BNC patch cable. Monitor Video Power Connection Connect the power connecter to a 12 VDC power adaptor.
PAGE 5
Installation Before starting, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 1. Loosen the screws to open the lower dome and then loosen the lock screw to remove the mounting base. Lock Screw 2. Attach the drill template to the place where you want to install the camera, then drill 4 screw holes and 1 cable hole (if you want to route the cables through the mounting base) according to the drill template. 3.
PAGE 6
Installation 4. Install the camera to the mounting base with the lock screw. 5. Adjust the Three-axis camer bracket to obtain the optimium viewing angle. Pan 0°~360° Tilt 0°~75° 6. Adjust the Focus and Zoom screw to achieve a clear image. Rotation 0°~360° Zoom Focus 7. Install the dome bubble on the camera with the screws, then carefully remove the protective film to complete the installation.
PAGE 7
Detailed Specifications Image Sensor Video Compression Resolution Effective Pixels Signal System Synchronization Lens S/R Ratio Auto Gain Control Min Illumination IR LEDs IR Distance Color-B/W Auto Switch Electronic Shutter White Balance WB Range ICR BLC WDR Transmission Distance Noise Reduction Video Output Weather Resistance Power Supply working Environment Weight Dimensions 1/3” CMOS (AR0330 + NVR2421 + TP2801) Standard H.264 1080P (2 MegaPixel) 1920(H) x 1080(V) PAL/NTSC Internal 2.
PAGE 8
LIMITED PRODUCT WARRANTY VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.