User Manual

ManualsBrandsVitek ManualsCamera & Photo2 Megapixel Outdoor IR HD-SDI Vandal Bullet Camera, 2.8-12mm Lens

VITEK

FEATURES:

• 1/2.9” Sony CMOS (IMX122LQJ)

• 2.0 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M)

• 70 850nm Dynamic Intensity IR LEDs with 200’ Range

• MegaPixel IR Corrected 2.8-12mm Varifocal Lens Included

• Mechanical IR Cut Filter (True Day/Night)

• 16:9 Video format

• Advanced OSD Functions: WDR, 3D-DNR, Night Watch DSS Low Light

Color Technology, ACE (Adaptive Color Enhancement), Motion Detection,

Privacy, Digital Zoom, HLM, Flip, Mirror

• 100% Pure Digital Transmission of video data

• Up to 700’ HD Transmission Range (Depending on

cable characteristics and integrity)

• 12VDC / 24VAC Dual Voltage Operation

VTC-BHOCR2812

2.0MP HD-SDI Vandal Resistant WDR

Bullet Camera with 70 IR LEDs

Summary of content (16 pages)

PAGE 1
VTC-BHOCR2812 2.0MP HD-SDI Vandal Resistant WDR Bullet Camera with 70 IR LEDs VITEK FEATURES: • 1/2.9” Sony CMOS (IMX122LQJ) • 2.0 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M) • 70 850nm Dynamic Intensity IR LEDs with 200’ Range • MegaPixel IR Corrected 2.
PAGE 2
PAGE 3
Zoom, Focus, and OSD controls are located on the back of the camera. The OSD control joystick can be accessed by turning the cover counter-clockwise. 1.
PAGE 4
MENU MENU Select any function you wish to change by pushing the joystick Up or Down Modes can be changed by pushing the joystick Left or Right. 3. When finished programing camera select EXIT to save values.
PAGE 5
• When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or down so that EXPOSURE is highlighted. • When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or down so that EXPOSURE is highlighted. Increase Level Decrease Level the type of the lens can be set to either DC or Manual.
PAGE 6
by using the joystick up or down so that the arrow indicates White Bal. joystick. When Halogen or other specialty lighting is used. Increase or Decrease Level. Increase or Decrease Level. Increase or Decrease Level.
PAGE 7
MENU Set from 0-10 (set to high and color will fade) Turns Mirror / Flip On or Off. Adjustable digital zoom from 0~127x.
PAGE 8
to prevent bright lights from washing out the picture i.e.
PAGE 9
The Wide Dynamic Range feature improves the overall picture balance beyond the Backlight Compensation feature. It creates an optimal balance of brightness and color by combining images from a bright area (high shutter speed) and images from a dark area (low shutter speed).
PAGE 10
• Reduces noise level in low light conditions.
PAGE 11
MENU MENU 11
PAGE 12
MENU Set output frame to 25 or 30 (PAL/NTSC).
PAGE 13
(In this mode the OSD might flicker) Adjust the focus while in zoom mode to better focus the camera Factory Default 13
PAGE 14
DIMENSIONS 9.06” 6.06” 3.90” 6.10” 3.70” 3.54” 5.
PAGE 15
SPECIFICATIONS Sensor Resolution S/N Video Output IR Illuminators IR Color Temp. IR Range Dynamic Intensity IR LEDs Lens Minimum Illumination Day/Night Electronic shutter speed White Balance Brightness DSS (Sens-Up) DNR WDR OSD Language Digital Zoom Privacy Motion Detection ACE (Adaptive Color Enhancement) Advanced OSD Functions Communication HD Transmission Range Weather Resistance Rating Operating Conditions Input Voltage Dimensions 1/2.9” Sony CMOS (IMX122LQJ) 2.
PAGE 16
LIMITED LIABILITY WARRANTY VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.