Quick Start Guide

ManualsBrandsVitek ManualsElectronics32 Channel 4K H.265 Real Time Network Video Recorder with Facial Detection, 42TB

QUICK START GUIDE

FEATURES:

• 4, 8, 16, 32, and 64 Channel Stand-alone Real-time IP Network Video Recorders

• Full 8 Megapixel Real-time recording & playback

• 4K HDMI & VGA Video Outputs

• H.265 / H.264 Video Compression

• Plug and Play & Auto configuration for many leading ONVIF compliant IP Camera models

• Internal PoE Switch (VT-TNR414P, VT-TNR818P, VT-TNR1616P, and VT-TNR3216P)

• 1 Gigabit LAN / Dual 1 Gigabit LAN (VT-TNR6480)

• Pentaplex: Live Display / Record / Playback / Backup / Remote Access

• Supports SATA2/SATA3 HDD

• Applications for iOS® & Android®

• Remote Viewing over the Internet via Web Browser or LAN

• Mac OS® Client & CMS Central Management Software Included

• Supports both Dynamic and Static IP Addresses

• Web-based remote configuration

• Control locally via Front Panel Controls, USB Mouse, or with the Included IR Remote control

VT-TNR Series

Transcendent Series 4, 8, 16, 32, and 64 Channel

8 MegaPixel H.265 Real Time Network Video

Recorders with 4K HDMI Output

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates

are available online. Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

Summary of content (8 pages)

PAGE 1
VT-TNR Series Transcendent Series 4, 8, 16, 32, and 64 Channel 8 MegaPixel H.265 Real Time Network Video Recorders with 4K HDMI Output QUICK START GUIDE FEATURES: • 4, 8, 16, 32, and 64 Channel Stand-alone Real-time IP Network Video Recorders • Full 8 Megapixel Real-time recording & playback • 4K HDMI & VGA Video Outputs • H.265 / H.
PAGE 2
SETUP & CONFIGURATION: 1. Notes ● Please read this instruction carefully for correct use of the product and preserve it for reference purposes. ● This manual is suitable for 4/8/16/32/64 CH Network Video Recorder. All the examples and pictures used here are for reference only. ● There may be several technically incorrect places or printing errors in this manual. The updates will be added into the new version of this manual. The contents of this manual are subject to change without notice.
PAGE 3
4. System Startup ● Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expending the life of your device ● Startup: ① Connect the output display device to the VGA/HDMI interface of the NVR. ② Connect the mouse and power. The device will boot and the power LED will turn blue. ③ A WIZARD window will pop up (you should select the display language the first time you use the NVR). Refer to 3.1 Startup Wizard for details.
PAGE 4
Date and Time Configuration: ● The date and time of the system needs to be set up if you use the wizard for the first time. Refer to the following figure. Set the time zone, system time, date format and time format. The DST will be enabled by default if the time zone selected includes DST. Click “Next” to continue.
PAGE 5
QRCode: ● You can scan the QRCode through the mobile client which is installed on a mobile phone or Tablet to log into the mobile client instantly. Please refer to 12.1 Mobile Client Surveillance for details. Add Camera: ● Click “Refresh” to refresh the list of online IP cameras which are in the same local network with NVR and then click to add the searched camera. Click “Add All” to add all the cameras in the list. Click to delete the added camera. Click “Delete All” to delete all the added cameras.
PAGE 6
● Click to edit the found IP camera as shown on the below left. Input the new IP address, subnet mask, gateway, username and the password of the camera. Click “OK” to save the settings. ● Click to edit the added camera as shown on the above right. Input the new camera name, IP address, port, username and the password of the camera. You can click “Test” to test the effectiveness of the input information. Click “OK” to save the settings. You can change the IP camera name only when the added camera is online.
PAGE 7
Disk Settings: ● You can view the disk number, disk capacity of the NVR and serial number, R&W status of the disk. Click “Formatting” to format the disk.
PAGE 8
Record Settings: ● Two record modes are available: Auto and Manual. ● Auto: Select one auto mode in the interface as shown below and then click “OK” button to save the settings. See 7.1.1 Mode Configuration for details. 28492 CONSTELLATION ROAD VALENCIA, CA 91355 WWW.VITEKCCTV.COM Version 3.