User Manual

ManualsBrandsVitek ManualsCamera & PhotoHD-TVI/AHD/CVI/CVBS 1080P Fixed Turret Camera 4 Pack Includes VTC-THT2RFE-2 with 2.8mm Lens VT-1205A-D4K 12VDC Power Block

VITEK

FEATURES

• 1/2.9” 2.1 Megapixel Progressive Scan CMOS Sensor

• HD-TVI, AHD, CVI, and CVBS Video Output

• 3.6mm & 2.8mm Fixed Lens Options

• Up to 70’ IR Range

• Digital Wide Dynamic Range (D-WDR)

• True Mechanical Day/Night function by ICR

• 3D-DNR Noise Reduction

• IP66 Weather Resistance

• Supports Up The COAX Control

• Over 1500’ HD Video Transmission (Depending on cable characteristics and integrity)

• Optional Junction Box Mounts Available

• 12VDC Operation

VTD-THD2RFE

VTC-THT2RFE

VTC-THB2RFE

2.1 Megapixel Indoor/Outdoor HD-TVI/

AHD/CVI/CVBS IR Cameras

Summary of content (12 pages)

PAGE 1
VTD-THD2RFE VTC-THT2RFE VTC-THB2RFE VITEK 2.1 Megapixel Indoor/Outdoor HD-TVI/ AHD/CVI/CVBS IR Cameras FEATURES • 1/2.9” 2.1 Megapixel Progressive Scan CMOS Sensor • HD-TVI, AHD, CVI, and CVBS Video Output • 3.6mm & 2.
PAGE 2
Limited Product Warranty Safety Precaution To prevent electrical shock and risk of fire hazards, do not expose this unit to rain or moisture and only use specified power source.. VITEK products carry a three (3) year limited warranty.
PAGE 3
Video Connection VTC-THB2RFE Components Camera Screws Manual Drill Template Connect the BNC video connector to a BNC cable, then to a recorder. Monitor Overview This camera series supports both fixed and varifocal lenses. Please note that the zoom and focus features mentioned below are only available on the varifocal lens version. 1 Video **NOTE: This camera must be connected to a DVR that supports calling up the camera’s OSD menu via CoC.
PAGE 4
Installation Before you begin, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 3. Loosen the mount lock to adjust the Pan and Tilt of the camera, then tighten the mount lock to secure the viewing angle adjustments. 1.
PAGE 5
Video Connection VTC-THT2RFE Components Connect the BNC video connector to a BNC cable, then to a recorder. Monitor Camera Hex Wrench Manual Mounting Plate Screws Rubber Plug Overview This camera series supports both fixed and varifocal lenses. Please note that the zoom and focus features mentioned below are not features of the fixed lens version. Video 3 **NOTE: This camera must be connected to a DVR that supports calling up the camera’s OSD menu via CoC.
PAGE 6
Installation 4. Tighten the lock screws to secure the viewing angle adjustments. Before you begin, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 1. Attach the drill template to the place where you want to install the camera, then drill 3 screw holes and 1 cable hole (if you want to route the cables through the mounting base) according to the drill template . 2.
PAGE 7
Video Connection VTD-THD2RFE Components Camera Screws Manual Hex Wrench Connect the BNC video connector to a BNC cable, then to a recorder. Monitor Drill Template Overview Video 1 **NOTE: This camera must be connected to a DVR that supports calling up the camera’s OSD menu via CoC. 2 Power Connection 3 Connect the power connector to a regulated 12 VDC power adaptor.
PAGE 8
Installation Before you begin, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 4. Adjust the Three-axis camer bracket to obtain the optimium viewing angle. 1. Attach the drill template to the place where you want to install the camera, then drill 4 screw holes and 1 cable hole (if you want to route the cables through the mounting base) according to the drill template Pan 0°~240° Tilt 0°~68° .
PAGE 9
Camera OSD Menu The Transcendent 4-in1 camera series must be connected to a DVR which supports HD-TVI/AHD video signal input and COC protocol to access the OSD setup menu. Different DVRs manufacturers may have different modes of menu operation. The following menu toolbar will pop up by right-clicking the mouse when using VITEK Transcendent Series HD DVRs. You will see the following interface by clicking the button. You can select the menu by clicking (U) or (D) key on the direction area.
PAGE 10
Detailed Specifications Image Sensor Signal System Effective Pixels Resolution Video Output Lens Day/Night Min. IIIumination IR LEDs IR Distance S/N Ratio WDR Digital Noise Reduction (DNR) White Balance BLC Up the COAX Control (COC) Transmission Distance Power Input Power Consumption (12VDC) Weather Resistance Operation Conditions Weight Dimensions VTC-THB2RFE VTC-THT2RFE VTD-THD2RFE 1/2.9” 2.1 Megapixel Progressive Scan CMOS Sensor PAL/NTSC 1920(H) x 1080(V) HD-TVI / HD-CVI / AHD: 1080p/720p (2.
PAGE 11
VARIFOCAL TRANSCENDENT CAMERAS VTC-TTAB36R2V Transcendent Series 2.1 Megapixel Outdoor HD-TVI/AHD/CVBS Camera with 36 IR LED Illumination VTC-TTAT2HR2V Transcendent Series 2.1 Megapixel Outdoor HD-TVI/AHD/CVBS Turret Camera with 2 High Power IR LED Illumination VTD-TTAD30R2V Transcendent Series 2.
PAGE 12
28492 CONSTELLATION ROAD VALENCIA, CA 91355 WWW.VITEKCCTV.COM Version 2.