User's Manual

ManualsBrandsVista Manufacturing ManualsElectronicsVista BT in Aftermarket Channel

User Manual

Vista – Neriah Connect

Page 1 of 7

P:\P18039 - Vista Aftermarket Marine Line\090 Customer Documents\User Manual.docx

INSTALLATION

Mounting:

Choose the mounting location: When choosing mounting location keep the following in mind.

 Plan which end of the module the light wires will need to exit to connect to the light.

 Plan how the power wires will be routed from the module to the power source.

 Choose a location to minimize the possibility of being bumped into and a location away

from excessive heat sources.

The Neriah Connect can be mounted using brackets, or adhesive backing.

 For adhesive mounting, remove the backing from the HB tape on the back of the module.

Then, as quickly as possible, press the module in its desired mounting location.

 For bracket mounting, use two brackets (part number 580529) and four user supplied

fasteners. See the chart below for recommended fasteners to utilize for various mounting

applications.

Material mounted to Recommended Fastener

Wood

#6 wood screw

, round or pan head

Aluminum #6 sheet metal screw, (optional self-

tapping, self-drilling)

#6 machine screw with mating nut

1/8” Blind Rivet

Fiberglass #6 machine screw with mating nut

and washer

Wiring:

The Neriah Connect is powered from a 12-volt DC source. For automotive and marine

applications, it can be connected to a 12-volt circuit that is protected by a 10-amp fuse.

For building applications, a class 2, 12-volt power supply must be used. See power

supply instructions for its mounting and connection to the building mains. The Neriah

Connect’s red wire connects to the supply’s positive terminal and the black wire connects

to the supply’s negative terminal.

The Neriah Connect is connected to an RGB light. The black wire connects to the light’s 12-volt

supply input. The red wire connects to the light’s low-side red terminal. The green wire

connects to the light’s low-side green terminal. The blue wire connects to the light’s low-

side blue terminal.

USING THE APP

The Vista Bluetooth App is available for both the Android operating system and iOS. Use the

instructions below that refer to the operating system of your device.

Android (Version 6 or later)

Installing: The Android version of the Vista Bluetooth App is available for free download

from Google Play. 30 mB of available ROM memory is required. Search for

Summary of content (7 pages)

PAGE 1
User Manual Vista – Neriah Connect INSTALLATION Mounting: Choose the mounting location: When choosing mounting location keep the following in mind.  Plan which end of the module the light wires will need to exit to connect to the light.  Plan how the power wires will be routed from the module to the power source.  Choose a location to minimize the possibility of being bumped into and a location away from excessive heat sources. The Neriah Connect can be mounted using brackets, or adhesive backing.
PAGE 2
User Manual Vista – Neriah Connect “Vista Bluetooth App” in the Google Play Application and click the “Install” button to start the download and installation. Connecting: Do not initialize the Bluetooth paring to a Vista Bluetooth light through the Bluetooth settings of the Android device. An extra layer of security requires that the pairing be established through the Vista Bluetooth App. Follow the pairing procedure below to pair with a new light.
PAGE 3
User Manual Vista – Neriah Connect Tap on a light to connect to it. Screen Shot 2: Select a light 3. After selecting a light to connect to, the “Bluetooth Pairing Request” prompt will appear. Select whether you wish to “Cancel” the pair request or “Pair” to continue. See screen shot 3. Tap on “Pair” to accept the connection request or “Cancel” to cancel the pair request. Screen Shot 3: Accept the pair request 4.
PAGE 4
User Manual Vista – Neriah Connect 5. After selecting the correct color in the above step, the color of the light will change to a second random color. Again, select the color tile that matches the color of the light. See screen shot 5. Screen Shot 5: Color match Pairing, Second Color 6. After selecting the correct color in the above step, the color of the light will change to a third random color. Again, select the color tile that matches the color of the light. See screen shot 6.
PAGE 5
User Manual Vista – Neriah Connect Screen Shot 7: Pairing successful App Settings: In the app settings, the user may define the default home screen to be either the “lights” screen or the “groups” screen. To navigate to the settings, do the following: 1. Select the menu bar in the upper left-hand corner of the app. 2. Select “Settings” in the menu bar screen. 3. Select either “lights” or “groups” on the “Default Homescreen” button.
PAGE 6
User Manual Vista – Neriah Connect REGULATORY STATEMENTS FCC COMPLIANCE STATEMENT: CAUTION: Changes or modifications not expressly approved could void your authority to use this equipment. This device complies with Part 15 of the FCC Rules.
PAGE 7
User Manual Vista – Neriah Connect WARRANTY STATEMENT GENERAL LIMITED WARRANTY: Vista warrants, to the original customer, that all LED products will be free of defect in material and/or workmanship for a period of two years from the original date of purchase.