PVR5000 HDD DVD RECORDER OPEN USB DV VIDEO L---AUDIO--- R
Technical Specifications Technical Specifications Output Audio level:1.0~2.0 Vrms (10k ohm load) Frequency response: 4Hz~44KHz (2dB) S /N ratio 90dB Audio distortion+noise -65dB(1KHz) Input Audio Level 2.0 Vrms (10k ohm Load) Audio Specifications General specifications Working humidity Power supply AC110-230V 50/60Hz Power consumption: 40W Standby power consumption: 3W Size: 430mmX48mmX308mm Weight Net: 4.65kg Gross: 5.
Technical Specifications Safety Instructions Technical Specifications Supported disc formats Supported recordable disc Danger Symbol The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage in the unit DVD, DVD+R/RW, DVD-R/RW, SVCD, VCD, CD-DA, JPEG Warning Symbol The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instruc
Appendix (Troubleshooting Guide) Table of Contents Before contacting service personnel, please check possible causes according to the following instructions. Basic Information Features of the recorder Terms Identification of Controls Front and Rear Panels Remote Control Installation and Remote Control Usage System Connections Connect to a TV Connect to 5.
Basic Information SETUP MENU -Time shift Table of Contents SETUP MENU -TimeShift Timeshift buffer Length Timeshift buffer length In this “ Timeshift buffer length” option, you can select 60 minutes, 180 minutes and 360 minutes difference option.
System Setup Table of Contents Play Process Control Menu Operation Forward Play Back Play Pause/Step Play Volume Control Selection Play Mode Selection Play Usage of the GO TO Button Audio Selection Audio Channel Selection Subtitle Selection Multi-angle Switch PBC ON/OFF(Available only for VCD 2.
System Setup SETUP MENU-DATE/TIME Basic Information Features of the recorder SETUP MENU -DATE/TIME Date(dd/mm/yy) Date(dd/mm/yy) 08 07 2006 Time(hh/mm) 23 29 ·Press the SETUP button on the remote control to display the SYSTEM SET-UP MENU. ·Use the CURSOR buttons of the remote control to select the Date(dd/mm/yy) and press the SELECT button to confirm. 1 ·Enter the correct date in mm/dd/yy format (Month/Day/Year) using the 0...9 keys.
Basic Information Terms System Setup Disc Menu Language 1. In the Lan guag e Setti ngs men u, use the HDD/DVD disk HDD/DVD disk is a highly compact device for storing. The high quality audio and video information is stored in it after being compiled in MPEG-II format. There are 4 types of DVD disks such as bosseyed single -layer DVD-5 with the capacity of 4.7 GB, bosseyed bi-layer DVD-9 with the capacity of 8.5GB, double-faced singled-layer DVD-10 with the capacity of 9.
System Setup Basic Information LPCM Output The unit can set the LPCM96K and LPCM48K difference Audio Sampling frequency. Dynamic Range The unit can set the full 3/ 4 1/ 2 1/ 4 off value, You can select different value to compress Audio output range. You can feel the difference of Audio output effect under different values. Terms(continued) Chapter It refers to the subtitle of the title of each division of the DVD image or music. Normally one title contains several chapters.
System Setup Identification of Controls FRONT PANEL 5 2 3 4 13 USB 1 STANDBY/ON 6 7 OPEN PLAY 8 9 STOP HDD 14 DV 10 DVD 15 16 VIDEO 17 L---AUDIO--- R 11 SOURCE 12 10.DVD BUTTON 2.STANDBY LED 11 .SOURCE BUTTON 3.IR(REMOTE SENSOR) 12.RECORD BUTTON 4.DVD DOOR 13.USB INPUT 5.VFD DISPLAY 14.DIGITAL VIDICON INPUT 6. OPEN/CLOSE BUTTON 15. VIDEO INPUT 7.PLAY BUTTON 16.AUDIO INPUT (FRONT RIGHT) 8.STOP BUTTON 17.AUDIO INPUT (FRONT LEFT) 1 OUTPUT VIDEO 5.
System Setup Remote Control SETUP MENU-VIDEO TV Type The product supports two different television systems that are SETUP MENU -VIDEO incompatible with each other. NTSC is the television system that is adopted in the North America region, PAL is the television system that is adopted typically in the rest of the world especially TV Type PAL TV Display 4:3 LB Video Output Format Interlaced in Europe and Asia. 1.
System Setup How to install and use the remote control Modify Channel Use the or button to Select the Modify Channel item, in dialog chart select OK. Modify channel information Program Number P013 Name C h 0 10 Frequency 144.27 Mhz Fine Tuning Skip NO Cancel OK Notes: Do not drop the remote controller or leave it in places of high humidity. Do not leave the infrared ray receiver exposed to direct sunlight or bright light. Please change the batteries of low power in time.
System Setup Record Quality 1. In the Recording Settings menu, use the or button to select the Default Quality item, and press the SELECT button to drop down a menu. 2. Use the or button to select a desired value and press the Select button. 3. Press the RETURN button to return to the upper level menu and set up other items. * For the differences of the six quality levels, SP, SP+, LP, SLP, EP and HQ, see the glossary for reference.
System Connection System Setup Connected to 5.1 channel Amplifier INPUT OUTPUT VIDEO 5.1 CH SL C L VIDEO IN The Rear Panel of the Unit L DIGITAL OUTPUT To satisfy customers with different characteristics and suit related devices of different qualities, the unit provides various functions. You can setup the system of the unit and regulate its operations to cater for your taste and suit well with other related devices of yours.
HDD Play Mode System Connection The Saved program will be removed from the Time shifting buffer when Stop is pressed. The product will carry out the Save immediately if the system is powered down.
NAVIGATION Mode HDD Play Mode The NAVIGATION Mode can realize all functions of the unit. Functions 1 DVD 2 Timeshift 3 Setup 4 Timer Recording 5 Pictures, Music, Video Press the NAVIGATION button of the remote control to display the screen on the left. 1.Switch to DVD Playback Mode; 2.Switch to TIMESHIFT Mode; 3.Switch to SYSTEM SETUP Mode; 4.Switch to TIMER RECORD Mode; 5.Switch to Pictures, Music, Video Playback Mode; 6.
HDD Play Mode Recording Mode Manual Recording Time shifting introduction Recording Source When the product is turned on, if the setup menu setup->Timeshift->Timeshift default source-> Tuner(ON) or you press Timeshift button from other menus, the last viewed TV channel will be tuned in and Time shifting starts automatically. Time shifting allows 'PAUSE’ the live TV broadcast for up to 60 minutes. At any time, the viewing can resume. Press PAUSE to pause the broadcast, press PLAY to resume TV viewing.
Play Mode Recording Mode DV Controlled Recording Play a USB DISC 1. This unit can perform real-time monitoring and recording for a DV through the IEEE 1394 serial port (DV). Connect the DV to the unit (for details, see System Connection: System Connection for Recording External Signals ) by the front panel inputs. Switch on the power of the unit. Press the DV/USB button. Switch on the Power button of the DV, set it to the CAMERA mode, and start monitoring. Press the REC/OTR button to start recording.
Recording Mode Timer Recording Play Mode Copy from Optical Disc to HDD Subtitle Selection Some DVD discs may have more than one kind of subtitle. You can select one of them as the output. 1. In the play control bar menu, select the Subtitle item. DVD There are some digits under the icon. The number on the Normal MODE right is the total number of subtitle langu ages provided Trick mode: by the disc; the one on the left is the current selection. 01/01 TITLE The default value can be set in the System Setup .
Play Mode Timer Recording You can set-up the product to schedule recordings to begin and end at a specific time. The recording can be onto HDD or DVD. This feature is useful if the specific quality, time, date and channel of a program you want to record is known in advance. 1. Press the TIMER button to enter the timer recording schedule setup menu, as shown in the chart to the right. There are 8 records in this menu. Each Timer Recording record represents a recording schedule.
Timer Recording Play Mode Selection Play Track Selection VCD Available for VCD, SVCD CD, etc. MODE: Normal 1. In the play control bar menu, select the Track item. Trick mode: 2. Press the SELECT button to enter the input TRACK: 01/01 mode. 3. Press the number buttons to enter the track number AUDIO: Stereo to be selected. PBC: ON 4. Press the SELECT button to start playing. TIME: 00:02:48-00:51:25 While the PBC is on, the track cannot be selected for SVCD and VCD discs.
Chapter Editing Play Mode Pause/Step Play Introduction For finalized discs, every title consists of only one chapter. There is no such function as selected chapter play or random programmed play of disc segments for such discs. The index icon of each title is determined by the system. As every title consists of only one chapter, it is inconvenient to browse the disc when you desire individualized appreciation. The chapter editing function is to solve such problem. 1.
Play Mode Chapter Editing Play Process Control In this section, we will introduce how to control the play process. Operation Steps Select the title to be edited 1. Enter the Editing Mode. 2. In the Editing Mode control bar menu, use the Menu Operation Most of the play process control operations can be done through the menu. The operations are as follows. 1. Enter the play control bar menu, use the arrow buttons to select the status-play item and press the SELECT button. DVD button to select the title.
Play Mode HDD Editing HDD Edit Five operations are possible. All can be accessed from the Title list menu. Press Right ARROW to get the Popup menu. Then use the Up or Down ARROW to highlight your option and press Select to continue. Your options are: play, Delete, Split, Segment and Rename. During HDD Edit operation, recording to HDD is on going. When you Edit a title, its corresponding representation on the HDD title list will bear the Edit icon to remind You. Delete HDD No .
Play Mode HDD Editing Title Segment Play Mode Control There are four playing modes for the unit, including Normal Play, Repeat Play, Program Play and Random Play. The operations are as follows. 0:00:00 1:40:00 Navigate: Play keys Segment begin/end: Select key Other options: return, Add/Clear Normal Play 1. Press the DISPLAY button to enter the control bar menu. 2. Press the , and SELECT buttons to select the first item in the control bar, Play Mode. 3.
HDD Editing Play Mode Rename This option brings up the on-screen keyboard. You can type in the title name for the title. Use the ARROWs to highlight the desired key, and use SELECT to select. On-screen keyboard Title name: TITLE A B C D E F G H I J K 0 1 2 L M N O P Q R S T U V 3 4 5 W X Y Z ( ) _ : ? . 6 7 8 9 Space Aa Backspace Clear Drama Action Sports Comedy News Exit Kids Enter the Title before Playing 1. This function is only available with DVD discs.
Play Mode Disc Operation The following charts are control bar menus for DVD, VCD, CD and MPEG 4 respectively. Please note that the menu may vary to some extent for different discs. The Disc Operation means operations done to recordable discs in the drive, including browsing disc information, finalizing a disc, removing disc content, deleting the last title, setting compatibility and write protection, etc. Play a DVD 1 2 The meanings for the icons are as follows. 3 4 5 1.
Disc Operation Title Editing DVD+RW: Rename Disc In the Disc Operation control bar menu, use the or button to select the Rename Disc item, and press the SELECT button to pop up a dialog box; in the given keyboard layout, use arrow buttons and the SELECT button to enter desired letters. Space: add a blank position, Caps: capital change , BkSp: delete a character forward , Delete: delete a character backward, Clear: delete all characters, Exit: exit operation, OK: confirm operation.