One Channel Receiver 315mhz VIS-8004 USER MANUAL For support: sales@visionistech.
SPECIFICATIONS Operating Frequency 315mhz Number of Codes 1,048,576 Data Format PWM Operating Voltage +12V 24V Operating Distance Up to 320 Feet (100M) Operating Temperature 0°C-70°C or 32°F - 158°F Current Draw 19mA Sensitivity -100DB Compatible Transmitter VIS-8005 RF channels One No.
INSTRUCTIONS TO PROGRAM A NEW TRANSMITTER ( REMOTE CONTROL) Each VIS-8004 Visionis receiver can program up to 20 Transmitters (remotes) (VIS-8005) Make sure that while you are programming the transmitter (remote) you have the remote in your hands ready to be programmed. Press the programming switch for 3 seconds or more. The channel’s LED will start to flash quickly. This will indicate that it is in programming mode.
Clamp Function: When The Transmitter (remote) button is pressed once the receiver turns ON and stays ON. The receiver will remain on regardless if another remote is pres sed. To turn OFF the receiver Press the Receiver function mode button once and the device will reset. Press on Function: As long as the Transmitter (remote) Button is pressed, the receiver will stay on.
DIFFERENT TYPE OF APPLICATION Positive Output NO COM NC Positive Power Sources Positive Power Output Negative Output NO COM NC Negative Power Sources Negative Power Output Power Power Typical N.C. Application Typical N.O. Application Magnetic locks NO COM NC Magnetic locks NO COM NC 12VDC N.C. Application with independent Power Sources Magnetic locks NO COM NC AC POWER SOURCES DC POWER SOURCES 12VDC N.O.
