Brochure

SkyeTek
RFID ENGINEERING
SkyeTek RFID Readers
SkyeRead M1
www.skyetek.com
5589 Arapahoe, 206B, Boulder, CO 80303
Phone: [phone] Fax: [phone]
SkyeTek, LLC.
SkyeRead M1 is a low-cost high-performance
RFID reader module for easy integration
into custom products and equipment.
This multi-protocol device can read
and write most industry standard
13.56MHz tags and smart labels.
Use the M1 to quickly and easily
add RFID technology to your
new systems and equipment.
Features:
· Compliant with ISO15693 and ISO14443
· Contactless identification
· No line of sight required
· Reads and writes tags with up to 10k bits
· Reads multiple tags simultaneously
· Small module for easy integration
· Optional external antenna
· Simple ASCII protocol interface
· Industry standard 13.56MHz operation
label printers
handheld data terminals
vending machines
barcode scanners
any custom equipment
Technical:
Supply Current:
RF Frequency:
RF Modulation:
RF Data Rate:
Host Interface:
45mA @ 5V, 150mA @ 1.8V, 50uA standby
13.56MHz
Tag-It HF (Texas Instruments)
I·Code1 (Philips)
PicoTag 2K
*
(Inside Contactless)
GemWave
*
(TagSys)
ISO-14443
*
-A -B
10%/100% ASK (Reader to Tag)
FSK/Machester (Tag to Reader)
26.6 kbits/s (ISO15693)
105.9 kbits/s (ISO14443)
Serial RS232 or TTL (Rx/Tx/GND)
9600, 19200, 38400 kbits/s (N,8,1)
SPI bus (SDI/SDO/SCK) 3MHz data rate
I
2
C bus (SDA/SCL) 400kHz data rate
Power Supply: 1.2V to 5V operation
13.56MHz RFID Reader/Writer
ISO-15693: Tag-It ICode My-d STM
SkyeTek annouces SkyeRead M1
Dimensions: 38mm x 40mm x 4mm
For easy integration into:
Antenna:
ISO-15693 -2 -3:
Tag-It HF-I (Texas Instruments)
I·Code SLI (Philips)
My-d SRF55V02/10P (Infineon)
STM LRI512 (ST Microelectronics)
Multi-Protocol RFID
Read/Write Module
*
Available 2003
Read Range: 75/150mm int/ext antenna (credit card)
Compliance:
FCC, CE, Industry Canada
Internal or external 50-ohm antenna
FLASH MCU:
Firmware upgrades for new protocols
Tag Compatibility:
38mm
40mm