TECHCONNECT TC2-HDMIIP OWNERS MANUAL www.visionaudiovisual.
DECLARATION OF CONFORMITY Where applicable Vision products are certified and comply with all known local regulations to a ‘CB Certification’ standard. Vision commits to ensure all products are fully compliant with all applicable certification standards for sale in the EU and other participating countries. The product described in this owner manual is in compliance with RoHS (EU directive 2002/95/EC), and WEEE (EU directive 2002/96/EC) standards.
USE ONLY DOMESTIC AC OUTLETS Connecting the unit to an outlet supplying a higher voltage may create a fire hazard. HANDLE THE POWER CORD WITH CARE Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself. Pulling the cord may damage it. If you do not intend to use your unit for any considerable length of time, unplug the unit. Do not place furniture or other heavy objects on the cord, and try to avoid dropping heavy objects on it. Do not tie a knot in the power cord.
TRANSMITTER 2 1 1. 2. 5V 2A Power input HDMI Input 3 3. 4.
RECEIVER 1 1. 2. CAT5e/6 Output Reset button 3 3. 4.
INSTALLATION NOTE: This product is peer to peer and must be used as a set. NOTE: A power supply is required at each end. Connect cables. Notes: 1. CAT5e/6 cables used should be wired to IEEE-568B standard. Unshielded Twisted Pair (UTP) or Shielded Twisted Pair (STP) are both acceptable. 2. Transmitter can connect directly to receiver without a cross-over cable. 3. The transmitter and receiver automatically find each other on a network when patched through a network switcher.
TROUBLESHOOTING If your system is not operating properly, please refer to the following information. If the problem persists, disconnect from power and contact your AV reseller immediately. Problem Correction Yellow light flashing slowly • • • Transmitter and receiver are reversed Source device not outputting signal HDMI input cable not working Yellow light flashing quickly, no image • • Reduce resolution of source to match display device.
SPECIFICATIONS TRANSMITTER DIMENSIONS: 110 x 58 x 26 mm (length x width x height) RECEIVER DIMENSIONS: as above PRODUCT WEIGHT: 0.48 kg per set CONSTRUCTION MATERIAL: Metal COLOUR: White TECHNICAL DETAILS: Standard: IEEE-568B Cable: CAT5/5E/6 Bandwidth: 50mbs Frame rate: 30fps HDMI format supported: 1080p @ 50/60Hz HDMI Version: partial 1.4 e.g.
WARRANTY This product comes with a 2-year return to base warranty, effective from the date of purchase. This warranty applies only to the original purchaser and is not transferable. For the avoidance of doubt, this will be taken from the information held by the appointed national distributor at the point of sale. If the product is DOA (dead on arrival), you have 21 days from purchase date to notify the national distributor via your AV reseller.