Water Sensor Installation and Instructions WSW Programing/Enroliing WSW 4, Program as Day Zone (05) on loop 3 2. Takes 3 minutes and 3 seconds to trip dnd 8 minutes and 3 seconds to reset. 3, 2016 panel firmware must be 1.10.1 or higher, General information 1. Unit made to work with 2616 wireless alarm panel only. 2. Low battery on WEDGE will report to 2616 Panel 3. Use only probe that attracted to WS2G6 4. Transmitter operation temperature 20F to 120F &.