User's Manual Part 3

ManualsBrandsVirtuix ManualsElectronicsOMNI System

34 35

12. INSTALL RACK AND

BOOM (OPTIONAL)

BOOM / RACK

If you purchased the Omni Rack and/or

Boom from our store, now is a good time to

place these accessories next to your Omni

at a safe distance.

We recommend putting the Boom to the

side of the Omni at a safe distance and the

Rack between your Omni and computer

desk/monitor.

Doc V

“

You

’

re almost ready to step into the Omni

and become TRAVR

’

s newest agent! First make

sure you

’

ve read the operational instructions

carefully – the Omni

’

s Base and Shoes are slippery

so we

’

ve outlined a safe procedure for you.

”

B.A.

Summary of content (9 pages)

PAGE 1
Doc V: “You’re almost ready to step into the Omni and become TRAVR’s newest agent! First make sure you’ve read the operational instructions carefully – the Omni’s Base and Shoes are slippery so we’ve outlined a safe procedure for you.” 12. INSTALL RACK AND BOOM (OPTIONAL) B BOOM / RACK A 34 A. If you purchased the Omni Rack and/or Boom from our store, now is a good time to place these accessories next to your Omni at a safe distance. B.
PAGE 2
Doc V: “Note that the Pods won’t work with your Omni until they have been connected with your PC and assigned to your Omni. See the ‘other usage instructions’ section for a complete list of the Pod LED indicator meanings.” 13-1. INSTRUCTIONS AND FIRST USE 3. Unplug the Pods and verify the Pods’ indicated LEDs : CAUTION To avoid risk of injury, follow the instructions related to use of the Omni Shoes and Safety Harness. Do not wear the Omni footwear outside of the Virtuix Omni.
PAGE 3
Doc V: “Alright this is it; time to buckle-up soldier! A New World is waiting for you!” 13-2. INSTRUCTIONS AND FIRST USE 3. Place the Shoes on the foot imprints – it is important to put the Shoes on while you are on the Omni Mat. Do not step off the Omni Mat while wearing the Omni Shoes.
PAGE 4
Doc V: “Make sure the Ring is at the right height for you before strapping into the Harness. Don’t forget to close and lock both foot levers and the Ring door!” 13-3. INSTRUCTIONS AND FIRST USE H. Adjust the Ring Height and Strap into the Harness Before tightening the Harness, you will most likely need to adjust the height of the Ring. 1. While standing inside the Omni, hold onto the Ring with both hands and open the foot levers with your feet.
PAGE 5
Doc V: “Now you’re ready to try walking! Check out our demonstration video on how to walk on the Omni at www.virtuix.com/instructions. Walking and running on the Omni takes some practice – you won’t be running at full speed at your ﬁrst try! Don’t give up if you struggle at ﬁrst. It takes skill and practice to become a TRAVR agent. Do you have what it takes?” 13-4. INSTRUCTIONS AND FIRST USE 4. Securely fasten the waist belt of the Harness. I.
PAGE 6
13-5. INSTRUCTIONS AND FIRST USE WARNING Use of Virtual Reality (“VR”) head-mounted displays may present risks of injury. Be sure to read and follow all manufacturer’s instructions and heed all warnings related to use of VR devices (sold separately). Doc V: “ TRAVR is the name of a secret organization tasked with protecting humanity. Its ﬁrst and most immediate mission is to thwart the evil machinations of the cult known as Hades.
PAGE 7
Doc V: “Be careful not to lean on the Ring door when entering and exiting the Omni, and always hold onto the Ring with both hands while doing so!” 14-1. OTHER USAGE INSTRUCTIONS A. Safely Exiting the Omni B. Adjusting the Ring Height 1. Unfasten the Velcro belt of your Harness and unclip the thigh-strap buckles. 1. While standing inside the Omni, hold onto the Ring with both hands and open the foot levers with your feet. 2. Open the Ring door, and then hold onto the Ring with both hands.
PAGE 8
Doc V: “Note that the Pods won’t work with your Omni until they have been connected with your PC and assigned to your Omni. Also, don’t forget to update your Pod ﬁrmware whenever a message appears telling you that an update has become available!” 14-2. OTHER USAGE INSTRUCTIONS C. Omni Pod LEDs WARNING The Omni Pods have an LED to indicate the Pod’s state, as listed below: Off Off The Pod is switched off. The Pods emit radio frequency (RF) signals.
PAGE 9
Doc V: “When your Omni Shoes or Harness are worn, you can re-order at www.virtuix.com/products. Don’t enter the battleﬁeld with worn accessories!” 15. DISASSEMBLY AND MAINTENANCE A. Removing the Omni Arms B. Removing the Harness Support Locks Up to Top To remove the Harness Support Locks, unscrew the knobs. You’ll need to remove the Locks to enable jumping on the Omni. Releasing 1. Disconnect the Ring Cable from the Omni Ring and left Tower.