User Guide
RESET
Open the charging case, both earbuds will
power on and enter pairing mode and the
LED light will flash red and white alternately.
充電ケースを開くと、両方のイヤホンが自動的にオ
ンになり、ペアリングモードに 入り、LE Dライトが 赤と
白で交互に点滅します。
充電ケースを開くと、両方のイヤホンが自動的にオンにな
り、ペアリングモードに入り、LEDライトが赤と白で交互に点
滅します。
スマホで「M30」のBluetoothデ
バイスを検索して、接続します。
Q3: The left earbud is lost, so I buy a new single left one, how to pair?
Methods:
Step1. Double-tap both earbuds, then LED will flash red and white alternately which
means that they are in the paring mode.
Step2. Long press both earbuds for 3s, LED will flash red and white simultaneously.
Put them back to the charging case and now you can connect to your phone.
Settings
DEVICES
Connected
Bluetooth
Bluetooth
M30
1. Note:
if it claims “Unsuccessfully connected", please
delete all “M30” records on your phone.
2. Reset M30:
Step1. Make sure the charging case has power.
Step2. Put both earbuds into the charging case,
long press both earbuds for 5s until the earbuds
flash red light.
5s
2
1
Search Bluetooth name“
M30” and select it
in your mobile phone.
AUTO PAIRING SETUP
X1
S
X1
M
X1
L
X1
M
X1
S
1
Choose the perfect size for you
3
Give a slight twist to lock
them in your ear
2
Align and Assemble
Q&A
Q1: Why doesn't music stop when I put M30 back into the case?
Reason 1: Earbuds might not be placed properly and it is not in the status of charging.
Solution: Make sure M30 is being properly placed by checking whether the light of
earbuds flash when they are back into the case. Once you close the case, M30 will
automatically disconnect with your phone.
Reason 2: Charging case is out of battery
Solution: To recharge the case or to manually turn off the earbuds by long pressing
the button on both earbuds for 5s until you hear ”Power off”.
Q1: M30をケースに戻しても音楽が止まらないのはなぜですか?
可能の原因1:イヤホンはケースに正しく置かれていない、充電状態に入りません。
解 決 策:
M30を充電ケースに戻す時に、イヤホンは正しく置かれて、イヤホンのライトが点滅することを確認
してください。これで、ケースを閉じるとM30は自動的にスマホとの接続を切断します。
可能の原因2:充電ケースが電池切れです。
解決策:
充電ケースを充電するか、「パワーオフ」が聞こえるまで、両方のイヤホンのMFBボタンを同時に5秒
間長押しして、手動でイヤホンをオフにします。
Q2: 充 電ケースの バッテリー残量 はどのように確 認できますか?
インジケーターの3つの色はバッテリー残量を示します。
Be kindly noted that the case must be closed to disconnect the earbuds.Be kindly noted that the case must be closed to disconnect the earbuds.
4
TOUCH CONTROL
R
L
Left Earbud:
1. Volume down: keep touching it, volume will be down decreasingly
2. Previous track: double tap
3. Play or pause: tap once
4. Answer or end a call: double tap
5. Reject a call: keep touching for 1 second
6. Activate Siri or Google Assistant: triple-tap
Right Earbud:
1. Volume up: keep touching it, volume will be up increasingly
2. Next track: double tap
3. Play or pause: tap once
4. Answer or end a call: double tap
5. Reject a call: keep touching for 1 second
6. Activate Siri or Google Assistant: triple-tap
自 動 ペアリング 設 定
リ セ ット
リ セ ット
タッチ 操 作
QUICK OPERATION GUIDE
クイック 操 作 ガ イド
1.注意:
イヤホンの接続を解除するために、必ず充電ケースを閉じてください。
ステップ1.充電ケースのバッテリー残量があることを確認し
てください。
ステップ2.イヤホンを充電ケースに入れて、LEDライトは赤
く点滅するまで、両方のイヤホンのMFBを同時に5秒間押し
続けます。
2.M30のリセット
1.音量を上げる:MFBボタンを押し続けて、音量を徐々に上げます。
2.次の曲へ:2回タッチ
3.再生/一時停止:1回タッチ
4.通話応答/終了:2回タッチ
5.着信拒否:1秒間押し続ける
6.Siri又はGoogleアシスタントを起動する:3回タッチ
右耳のイヤホン
1.音量を下げる:MFBボタンを押し続けて、音量を徐々に下げます。
2.前の曲へ:2回タッチ
3.再生/一時停止:1回タッチ
4.通話応答/終了:2回タッチ
5.着信拒否:1秒間押し続ける
6.Siri又はGoogleアシスタントを起動する:3回タッチ
左耳のイヤホン
ご自身の耳に合うサイズのイヤピースをご
使 用くだ さ い
正しく取り付 けます
装着時にイヤホンを少しひねっ
て耳に挿入して固定します
Q2: How to know the remaining battery of the charging case?
3 colors indicate different battery levels:
Red Light: 0-35% Pink Light: 35%-75% Blue Light: 75%-100%
赤 い ライト : 0-35% ピンクラ イト: 35%-75% 青 いラ イト: 75%-100%
Q3: 左のイヤホンがなくなったので、新しい左の1つを購入しました。ペアリングするに
はどうすればよいですか?
方 法:
ステップ1.
両方のイヤホンをダブルタッチして、LEDライトが赤と白で交互に点滅して、ペアリングモードにな
ります。
ステップ 2 . 両方のイヤホンを3秒間長押しして、LEDライトが赤と白で同時に点滅します。イヤホンを充電ケー
スに戻して、これでスマホに接続できます。