User Guide

RESET
Open the charging case, both earbuds
will power on and enter pairing mode
and the LED light will flash red and white
alternately.
Settings
DEVICES
Connected
Bluetooth
Bluetooth
Flame Lite
OPERATION GUIDE
2
1
正面 反面
Search Bluetooth name
“Flame Lite” and select it in
your mobile phone.
AUTO PAIRING SETUP
X1
S
X1
XS
X1
M
X1
L
1
Choose the perfect size for you
3
Give a slight twist to
lock them in your ear
2
Align and Assemble
4
TOUCH CONTROL
R
L
Right Earbud：
1. Volume up: keep touching it, volume will be up increasingly
2. Next track: double tap
3. Play or pause: tap once
4. Answer or end a call: double tap
5. Reject a call: keep touching for 2 seconds
6. Activate Siri or Google Assistant: triple-tap
Left Earbud:
1. Volume down: keep touching it, volume will be down decreasingly
2. Previous track: double tap
3. Play or pause: tap once
4. Answer or end a call: double tap
5. Reject a call: keep touching for 2 seconds
6. Activate Siri or Google Assistant: triple-tap
Hold on 6s
1. Keep both earbuds in the charging case.（With the charging case open)
2. Press and hold the button on the charging case for 6 seconds to clear all paired information.
3. The earbuds will flash red and white 3 times, which means successful resetting.
4. The LED light will go out. 1 second later, Flame Lite will automatically re-enter into
pairing mode.
3 Times
LED
LED
Q&A
Note: Remove the insulating film on the charging connectors on both earbuds
before charging it.
Q1：Why doesn't music stop when I put Flame Lite back into the case
and close the case?
Q2：How to know the remaining battery of the charging case?
Reason 1: Earbuds might not be placed properly and not in the status of charging.
Solution: Make sure Flame Lite is being properly placed.
Reason 2: The charging case is out of battery.
Solution:
1. To recharge the case.
2. Or manually turn off the earbuds by keeping touching the buttons on both earbuds
for 5 seconds. The earbud’s light will keep on for 1 second and then goes
out, with the voice prompt “Power off”.
When you press the button on the charging case or open or close the case, you will
know the battery level by checking the indicator:
Solution: Reset the earbuds by following the steps as previously mentioned.
Battery Level
＜35%
35%-75%
＞75%
Out of Power
LED light
Flashes red for 3 seconds.
Flashes red and white simultaneously twice.
LED flash white 3 times.
No light.
Q3: How to know the charging status and the full power status of the case?
Q4：How to operate if the Bluetooth disconnect or fail to reconnect?
Red LED keeps steady on.
White LED keeps steady on for 60 seconds
and then it will go out.
Charging Fully power