GFV24CB GAMING MONITOR USER MANUAL In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials.
Table of Contents Section 1: Safety Precautions...................................................... 4 Section 2: Box Contents............................................................... 5 Section 3: Product Overview........................................................ 6 3.1 – Monitor Buttons................................................................ 6 3.2 – Monitor Ports.................................................................... 6 Section 4: Stand Installation.........................
Section 1: Safety Precautions Read and observe the following warnings and information below. 1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp cloth, wait for your monitor to completely dry before plugging it in again. 2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor. 3. This monitor features ventilation openings on the back of the unit.
Section 2: Box Contents Monitor x 1 Stand Stem x 1 Stand Base x 1 10mm 26mm NO. 1 Screws x 2 (for Stand Installation) NO. 2 Screws x 4 (for Wall Mounting) DP DP Power Cable x 1 DP Cable x 1 Extra screws may be included as backup.
Section 3: Product Overview 3.1 – Monitor Buttons 1 2 3 4 5 5 M Menu Button: Press to display the OSD menu or enter sub-menus. Down Button: Press to move down in the menus. Up Button: Press to move up in the menus. E Exit Button: Press to exit. Power Button: Press to turn the monitor on/off. 6 LED Indicator: Changes colors to indicate status. Refer to Section 8. 1 2 3 4 6 3.
Section 4: Stand Installation 1. Open the package and take out the product with foam still attached. Gently place it on a desktop or table. 2. Take out the stem and base. Insert the stem into the base opening and turn it clockwise to lock in place. Then use the included screwdriver and one screw to fasten base to the stem. NO. 1 Screw Stand Opening 3. Attach the stand to monitor via the opening on the back. It should click into place.
Section 5: Wall Mounting VESA and/or mounting accessories not included. 1. Open the package, take out the monitor with the foam still attached, and gently place it on a desktop or table. If the monitor is attached to the stand, remove the stand by pressing the button on the back of the monitor just above the stand. 2. At the back of the monitor, attach the four NO. 2 screws onto the mounting holes on back of monitor. 26mm NO. 2 Screws x 2 10mm NO. 2 Screws x 2 3.
Section 6: Connectivity Options 6.1 – Connecting the Power Cable Connect the included power cable into the DC IN port in the back of the monitor, then plug the other end into a wall outlet. Power Cable 6.2 – DP Connectivity In order for the monitor to receive DisplayPort (DP) signals from the computer, use the DP cable (included) to connect the monitor to the computer.
6.3 – HDMI Connectivity In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to connect the monitor to the computer. HDMI Cable (not included) HDMI OUTPUT PC 6.4 – Connecting Your Headhones Plug in your headphones, or any 3.5mm-compatible external audio device, to receive audio signals from your monitor. If your audio out is connected to the monitor while other audio devices are connected to your computer, the other audio devices will not produce sound.
Section 7: Basic Operation 1. Insert one end of the DP cable into your PC’s graphics card. An HDMI cable may also be used. HDMI cable not included. For optimal refresh rate (or “performance”), it is recommended to use an DP cable with the monitor’s corresponding connector. 2. Connect the other end of the cable to the corresponding connector on your monitor. See the image below. DP Connector HDMI Connectors 3. Connect the power cable to your monitor then connect the other end to your power source.
Section 9: OSD Setup The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the M button. When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration and parts etc. 1. Press any one of the buttons (M, , , E, ) to activate the navigation window. eco 2. Press M ( ) to enter the OSD menu.
9.1 – OSD Menu Functions Main Menu Brightness Sub-Menu Options Description Brightness 0~100 Adjust display brightness Contrast 0~100 Standard, Game, RTS, FPS, Movie, Text On Adjust display contrast Off Turn off DCR function Auto Best for overall use Wide Set image aspect ratio to fullscreen 4:3 Set image aspect ratio to 4:3 Warm, Cool, User Set the display color temperature mode ECO DCR Image Aspect Color Temp. Color Temp. RED BLUE GREEN Language OSD Setting OSD H. Position OSD V.
Section 10: ECO Modes and Gameplus 1. Press any one of the buttons (M, , , E, ) to activate the navigation window. eco 2. Press ( ) to switch Gameplus modes. Choose the crosshair icon best suited for your game. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other scenarios. 3 Press ( eco) button to switch ECO modes. These modes (Standard, Text, Movie, Game, FPS, and RTS) can be used to optimize settings according to your activity.
The color bleeds or visual effects appear unusual. • If your screen is all red or blue, or any colors disappear, check to see that the cable is properly inserted. A loose connection can cause a bad signal. • Try connecting to another video source for comparison. The screen appears to be scrolling, rolling, or moving unusually. • Check that your source frequency is within 48-144Hz. • Reconnect and ensure your video cable is secure.
Image position is not centered/the size is not right • Please adjust Clock or Auto setting. Color difference (colors are not optimized) • Adjust RGB color or reset color temperature. Section 12: Specifications Item Detail Model Number GFV24CB Screen Size 23.
Section 13: Three-Year Limited Hardware Warranty Your VIOTEK® GFV24CB Monitor (”Product”) includes a Three-Year Limited Hardware Warranty (“Warranty”). The Warranty covers product defects in materials and workmanship under normal use. This Warranty is limited to residents of the United States and Canada only and is available only to original purchasers. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY. DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules.
COPYRIGHT © 2021 VIOTEK. ALL RIGHTS RESERVED.