EY VIREO TECHNOLOGY & INNOVATION OPERATING INSTRUCTIONS 22" LCD Television with LED Back light LED22VH60 hei: AIR MODE SELECTION The Irrevocable menu option is set to the “CABLE” (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the “Air” mode. Please refer to page 19 of the owner's manual for the details of this menu.
Contents Contents Caution 2 Safety Information 3 Unit and Accessories 4 Product Feature 4 Introduction 5-8 1. Front View 5 2. Rear View 6 3. Remote Control 7-8 Connection 9-11 Basic Operation 12-13 0SD Menu 14-20 1. Picture menu 14 2. Audio menu 15 3. Time menu 16 4. Setup menu 17 5. Lock menu 18 6.
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended tc alert the user to the presence of UN-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety In [marination Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety + The TV set should only be connected to a mains supply which matches that stated on the label on the mains adapter + To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Unit and Accessories and Product Feature Unit and Accessories User’s Manual User's manual Remote control Mains adapter Mains cable Batteries: 2xAAA Product Feature « 21.
Introduction Introduction 1. Front View OO MENU CH. CH+ VOL: VOL+ INPUT POWER o Led Indicator O Remote Control window {Keep clear) 1). (IR) Infrared Receiver: Receives IR signals from the remote control. (Power Indicator: Press POWER to turn on and off.
Introduction 2. Rear View Rein i=in Video Pr £b ¥ POWER Service HDMI OMIT Vea PC-IN Coax Headphone oem POWER: Connect to the mains adapter. 2). Service: For software update only. 3). HDMI: Connect it to the HDMI of DVD or other equipment. 4). VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC. 5). PC-IN: Connect it to the audio output terminal of PC. 6). Coax: Digital coaxial output. 7). Headphone: Connect it to your headphone or other audio equipment. 8).
3. Remote Control Introduction The remote control is using Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. Lo (bee mre O POWER(red attribution: Turn the TV standbys. INPUT: Press to display the input source menu. Number Buttons: Choose channel directly Select channel 5 Press bunion "5" Select channel 62 Press button "6.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones. 3. Close the cover. A Batteries shall not be exposed to excessive heat such as sunshine or fire. The remote control should be operated within 30 feet) and 30° to the left and right of the IR receive at the front of the LCD TV.
Connection Connection Power Cord Connection Connect to the power supply correctly as shown with the mains cable and mains adapter. When you connect the power, the TV set comes into standby mode and the LED indicator (Page 5) lights red. You could bring the TV out of standby mode by press the POWER button on TV set (page 5) or remote control{page 7). and the LED indicator lights green.
Connection AV Input Connection Note: All cables shown are not included with the TV.
Connection HDMI Connection Note: All cables shown are not included with the TV. Service HDMI HEME En om ome PAN Coax Headphone ~ = 2228) DVD or VOR — fd 1 Ghana He HOM hie HOM [6k an the TV set Will 8 pe cable. | PC Connection Note: All cables shown are not included with the TV. 12 HOM VGA PAN Coax Headphone using a sound card, adjust the PC sound as required. PC audio Set the video resolution of your | gq x 480, 60 Hz cable PC to 1024x768, 60Hz on its original monitor.
Basie Operation Basic Operation Power on/off 1. Connect to the power with a mains cable and an adapter (page. on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/button on the TV set button on remote control to select the input source, press OK button on the a a remote control to enter.
ic Operation Basic OSD Menu operation Press MENU button to display the O8D menu as below: Go eo saa a Manasseh Silas Tenn Use < / > button to select the main menu, and press VV button to enter the sub menu. In the sub menu, use VV button to select the function item, and you could: adjust ("Contrast” item in Picture menu for example) with < / > button; select {"Picture Mode" item in Picture menu for example) with < / > button; enter the sub menu ("Close Caption” item in Setup menu for example) with > button.
OSD Menu OSD Menu 1. Picture menu KJ &] Jot pee CY Picture Mode < Se lt Brightness Eats EOE El Description Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture. Color: Adjust color of the picture. Tint: Control the fresh tones to make them appear natural.
OSD Menu 2. Audio menu Ass Sh ie ret] oie DIFF Type « PCH LU TE Tr English CoE Cain Description Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. SPIFF Type: Select spiff type between PCM and RAW.
OSD Menu 3. Time menu SS Ult enn + Rehi DEL RTE RT Ce era «2009/02/13 OB: MAZAMA » Co oda Description Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or deactivate this function. Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time: Select between On and Off. Clock: User can not change time manually during DTV mode, for time is from signal source directly.
OSD Menu 4. Setup menu Audio Hose Reduction aia Closed Caption xys ee Ei Description Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle.
OSD Menu 5. Lock menu You must enter the password te gain access fo the Lock menu. The default password is You may modify the following options: LE Le us cantata Nat a Description Change password: Change the password, you must enter the new password twice to confirm it. Note: Do not forget the password. System Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below don't work. This option menu allows you to lock any TV channel or adjust the Movie rating filter.
OSD Menu 6. Channel menu Kio Tints fo Look Chant: § ast nae oe] Description Air/Cable: Allow you to select antenna between Air and Cable. If you sleet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel Label and DTV Signal) are unable to use. Auto Scan: Enter the Auto Scan menu to start auto scan. * If you select “Cable” as input signal in Antenna item, allows you to select Cable System among: Auto, STD, IRC and HRC.
OSD Menu Show/Hide: Allow you tc show or hide the channels. Use A/V button to highlight the desired item, then press OK button to show or hide the highlighted channel ws Channel No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel. Press < / > button to select the position of the table, and press /\ / V button to select the words. DTV Signal: Show the quality of digital signal: good, Normal, Bad.
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals pinpoint the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power Check all connections to the TV. Press either the power button or the Standby button on the Remote control.
Technical Specifications Technical Specifications 22 inch (diagonal) 250 CD” 1000:1 1366x768 DC 12V 5A B60W * Product specifications and appearance are subject to change without notice.
INSTRUCTION FOR WALL MOUNT The wall mount kit (not included) with your purchase allows you to mount your VIREO TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. VIREO is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting.
VIORE™ LIMITED WARRANTY EAT PANEL TELEVISION “This VIREO brand Product, as supplied and distributed by VIREO and delivered new in the original cartoon to the original purchaser is warranted by VIREO against manufacturing defects in materials and workmanship for a limited warranty period of ane (1) year on parts and Tabor. However, there will be only a 90 day parts and labor limit warranty for commercial use.