40" Commercial Grade 1080p LCD Television LC40VF5HTL 17
Contents Contents Caution Safety Information 2 3 Instructions for fixing stand 4 Unit and Accessories Product Feature 5 5 Introduction 1. Front View 2. Rear View 3. Remote Control 6-9 6 7 8-9 Basic Operation 10-11 OSD Menu 1. Picture menu 2. Audio menu 3. Time menu 4. Setup menu 5. Lock menu 6.
Caution Caution is intended to alert the user to the presence of un-insulated "dangerous to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor • To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Instructions for fixing stand Instructions for fixing stand Note: the pictures below are only for reference 1. Insert stand(part A) into unit(part B). Bottom of the stand 2. Screw the stand in the position as the picture shows. Screws (6 x ST4 x 12F) are provided with stand.
Unit and Accessories and Product Feature Unit and Accessories TV set Security Cover Stand INPUT 1 2 3 4 5 6 7 8 0 -/-- PICTURE SOUND 9 SLEEP DISPLAY CH+ VOL+ MUTE CH- VOL- MENU EXIT OK CC User's manual MTS EPG FAV Mains cable Remote control Batteries: 2xAAA Lock Screws for security plate(6xST4x20C) Screw driver˖T20 (3xM3x10) (3xST3x10C) Screws for security cover Screw driver˖T15 Security Plate Screws for stand (6 x ST4 x 12F) Product Feature • • • • • • Integrated ATSC TV
Introduction Introduction 1. Front View 1. (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press Power Button to turn on and off. Indicator on(Red) Indicator on(Green) Standby mode Power on mode The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 300 to the left or right side and 200 above or below the remote control window. 2.
Introduction 2. Rear View POWER SWITCH 2 1 12 Service 2 R OUT R IN 3 4 5 6 7 L OUT L IN 1 S-VIDEO 8 9 1. 2. 3. 4. 5. 6. 7. 10 11 AC POWER IN: Connect to an earth 100-240V, 50/60Hz AC outlet with the PowerCable. POWER SWITCH: Switch on or off the power suply. HDMI1/2: Connect them to the video output terminal of DVD.(used in HDTV1 mode) PC AUDIO IN: Connect it to the audio output terminal of PC. VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC.
Introduction 3. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER(red button): Turn the TV on/standby. INPUT: Press to display the input source menu. INPUT 1 2 3 4 5 6 7 8 9 0 -/-- PICTURE SOUND SLEEP DISPLAY CH+ VOL+ MUTE CH- VOL- MENU EXIT OK CC Number Buttons: Choose channel directly.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones. 3. Close the cover. - The remote control should be operated within 30 feet(7m) and 300 to the left and right of the IR receive at the front of the LCD TV. - Used batteries should be disposed properly.
Basic Operation Basic Operation Power on/off 1. Connect to the power with a mains cable and an adaptor (page9). 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or ġ / Ģ button on remote control to select the input source, press OK button on the remote control to enter.
Basic Operation Basic OSD Menu operation Press MENU button to display the OSD menu as below: Main menu Picture, Audio, Time, Setup, Lock, Channel Submenu (Picture menu for example) Hint you should operate the OSD menu according to the hint. Use / ! button to select the main menu, and press Ģ button to enter the submenu.
OSD Menu OSD Menu 1. Picture menu Description Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture. Color: Adjust color of the picture. Tint: Control the fresh tones to make them appear natural. Sharpness: Color Temp.: Select between Normal, Cool and Warm.
OSD Menu 2. Audio menu Flat Description Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. Audio Language: Select audio language.
OSD Menu 3. Time menu Description Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or deactivate this function. Time zone: Daylight Saving Time: Select between On and Off. Clock: User can not change time manually during DTV mode, for time is from signal source directly.
OSD Menu 4. Setup menu 16:9 PC SETUP Closed Caption Description Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle. PC SETUP: If the video input signal comes from your PC, you may adjust the V-Position, H-Position, Frequency, Phase or even perform an Auto adjustment.
OSD Menu 5. Lock menu
OSD Menu 6. Channel menu Picture Audio Time Setup Lock Channel Cable Air/Cable Auto Scan Favorite Show Hide Channel No. Channel Label DTV Signal Select Good : Move MENU Exit Description Air/Cable: Allow you to select antenna between Air and Cable. If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel Label and DTV Signal) are unable to use. Auto Scan: Enter the Auto Scan menu to start auto scan.
OSD Menu Show/Hide: $OORZ \RX WR VKRZ RU KLGH WKH FKDQQHOV 8VH Ĥ 0 ĥ EXWWRQ WR KLJKOLJKW WKH GHVLUHG LWHP WKHQ SUHVV OK EXWWRQ WR VKRZ RU KLGH WKH KLJKOLJKWHG FKDQQHO Channel No.
Specialty Hotel and Commercial Features Specialty Hotel and Commercial Features Securing the TV This TV can be secured to the surface of a desk or table using the included security plate and lock. To secure the TV: Ź Affix the security plate firmly to the surface of a desk or table in the position where you would like the TV to be located using 6xST4x20C type screws.
Specialty Hotel and Commercial Features Ź Lower the TV carefully onto the security pin. Always use 2 or more people for this task. Ź Lock the TV to the security pin using the included lock. Swivel Stand Optimum viewing angle for your guest. Using the connector security cover This TV includes a metal security cover to restrict access to the TV’s connectors. Use of this cover is optional. The cover ships installed on the TV and must be removed prior to cable connection.
Specialty Hotel and Commercial Features Ź Bend cables downwards and tie together Ź Fix cover in place with provided 6 x security screws and screwdriver. Take care not to capture cables between TV and cover.
Specialty Hotel and Commercial Features Configuring Hotel Mode settings This TV includes a specialized Hotel Mode Menu that allows you to configure settings for hotel and commercial use. You may restrict users’ access to TV features and control channel and volume settings. 1 OFF 2 3 4 5 OFF OFF OFF OFF 6 7 8 OFF 2-0 OFF OFF Start-up Channel Start-up Channel Num. Enable Main Menu Enable Keypad Func (1) To enable Hotel Mode: Ź Press INPUT Source menu appears.
Specialty Hotel and Commercial Features Details of settings are below (2) To block access to tuner settings Ź Set Channel Menu Display to ON. User cannot access channel menu so tuner settings cannot be changed. (3) To lock channel to current selection Ź Select the channel desired for viewing Ź Set Channel Change to OFF. Channel is locked to current selection. User cannot change channel.
Specialty Hotel and Commercial Features Ź Cloning Support Master TV settings can be easily transferred to multiple guest room TVs using the optional Cloning Tool CL100. Please refer to CL100 user manual for details.
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control.
40 450cd/m 2 4000:1 8W x 2 1920 x 1080 2 S-VIDEO 1 1 2 VIDEO AUDIO(L/R) 250W * Product specifications and appearance are subject to change without notice.
VIORETM COMMERCIAL LIMITED WARRANTY FLAT PANEL TELEVISION This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VIORE against manufacturing defects in materials and workmanship for a limited warranty period of two (2) years on parts and labor.
