L28 Mini WiFi Camera User Manual Support: vionmio@hotmail.
L28 1080P WiFi Camera Thanks for choosing our 2020 Upgraded small wireless camera. If you have any problems or suggestion, please do not hesitate to contact us on Amazon. Ⅰ. Product Detail 1. Camera Lens 6.Charging Port 2.IR Night LEDs 3.ON/OFF 7. Micro SD Card Port 4. Video/Reset 5.Photo Ⅱ. Product Features 1. Wifi Camera: This camera supports 2.4G network hotspot and WIFI connection. 2. Wide Field: Built in 140° wide angle lens.
. High Definition: Use FHD camera lens. 4. Night Vision: Captures great and clear images and videos at light with built-in 4 IR night LEDs. 5. Micro SD Card Saving: Support Max 128G SD card(NOT included) to save the recordings. 6. Motion Detection: You can enable this function in APP Sancam. When a moving object is detected, the camera will take a picture and push alerts to your phone. 7. Loop Recording: When the SD card is full, it will auto overwrite the oldest files and save new recordings. 8.
Android system iOS system 2. Turn on the camera: Slide ON/OFF to ON and wait 1-2 minutes. When the blue and red indicator lights are on, the camera will automatically transmit WiFi hotspot. Usually the process may take 1-3 minutes due to the signal strength, please keep your patience. 3. Connect the camera’s WiFi hotspot via your phone: Tap the WLAN settings on your phone, search for this camera’s WiFi hotspot (named with the UID sticked at the back of camera), then click it to match your phone.
4.2 Click LAN search device to find the camera. Please refer to the below picture. 4.3 Tap (Add)to enter next step. Please refer to the below picture.
Tips: Under the local connection, the camera's WIFI hotspot is valid within 10 meters. When your phone is out of the range, it will disconnect and you will not be able to watch the live view. 5. Set Remote Connection: Tap the Setting icon >>>Tap “Network configuration” >>>Select your router’s Wi-Fi name>>>Enter your WiFi’s password>>>Tap “Confirm” to finish setting remote connection. Please refer to the below pics.
6. Motion Detection Open the “Sancam” app on your phone>>> Tap “Setting” icon>>> Tap “Motion detection set” to set up and choose the sensitivity of the motion detection. Please refer to the below pics to set up this function.
Motion detection interval alarm is 5-60 seconds, you can set the interval alarm time by yourself. After turn on the Motion Detection function, you can also set to Push notification, Upload FTP after alarm. After triggering the motion detection alarm, it will automatically take 1-3 pictures if you have inserted a SD card in camera when motion detects. If you want to see what have captured, you can enter the report page on the main page of the APP to view it.
7. Micro SD card setting In this setting, if you have inserted a SD card in the camera, you will find the capacity of the card. If the card you use is NEW, please remember to format it before use. Besides, you can also set the camera Stop recording(the card won’t save any recording files), or you can set Full time recording, Alarm recording and Short video. Please refer to the below pics to set up this function. Full Time Recording: When you turn on the camera, it will auto start recording.
8. Inflared settings You can set Manual startup or Start timing on your own. By setting the startup time and shutdown time, the camera will auto to turn on and off the night vision function according to the system time.
9. Other Config In this setting, you can set Time Config, Power frequency, Initialization Setting, FTP Config, Email Config and User Config. 9.1 Time Config You can set the camera time in this function.
9.2 Power Frequency You can choose 50Hz or 60Hz in this setting. 9.3 Initialization Setting You can restart or reset the camera in this setting. We recommend you reset the camera by pressing the Reset button on the camera. 9.
9.5 Email Config By setting the email config, you can receive notification in Motion detection setting>>>Push alert. 9.6 User Config You can change password in the setting.
10. APP icons instructions: Please refer to the below picture. You can adjust Brightness, Image Contrast and Resolution, turn on/off Night Vision, Indicator Lights, Audio. You can also quickly take a photo and video. The Left/Right, Up/Down are for image switch.
11. Muti-use requirement If you have too many palces needed to be monitored, you can install several cameras(Max 4 cameras) at different places at the same time in one app. You can watch 4 live camera meanwhile on the app. If you have other family or friends who need to get access to the cameras and watch the live recordings, you can share it with your family. In the setting, you can edit the device name for different cameras, set the password, and then share it with QR code to your family and friends.
12. Playback and download files from memory card: Tap the home page“ ”icon and select the videos you need to watch or download. You can watch it online. Please refer to the below pics.
Ⅴ. Note 1. This camera only supports 2.4GHz network. It does not support 5GHz network. 2. Please insert a Micro SD card (NOT include) to save recordings before use. 3. If the memory card is brand new, please FORMAT it before using. 4. Camera can’t save videos without a SD card, but even without a card, the camera can still work and record. It won’t affect other functions. The only difference is that the SD card can save the recordings. 5.
Ⅶ. Product Parameter Video Resolution Video Encoding Resolution Frame rate Sensor Storage 1920*10801280*720/640*480 Optional AVC1 1920*1080 15FPS—30FPS Optional CMOS Support SD card MAX 128G(NOT included) Support System Windows/IOS/ Android Wide angle Charging Voltage Battery capacity Battery last time Charging time 140 DC-5V/1A 500 mAh 90 minutes 3.5 hours Ⅷ. Warnings 1. Applicable Occasion : Please strictly abide by relevant national laws and regulations. 2.