Copyright (c) 2018,Viofo Ltd, All rights reserved.
Table of Contents Table of Contents Product Overview Product Overview Product Overview 2 Standard Items Standard Items Optional Accessory Product Diagram Inserting / Removing the memory card LED Indicators Buttons and Icons Installation 9 Front Camera Car Charger Adapter USB Data Cable 3M Sticker 4m Car Charger USB Cable Front Camera Installation TM TM Rear Camera Installation Cable Connection Operation 14 Power On / Off Clips Loop Recording Emergency Recording Trim Removal Tool Option
Product Overview Product Overview Product Diagram 1) Front Camera USB Power Port Mount Rear VIOFO AV Lens AV Out USB Menu / Power On | Off REC Wi-Fi Rear Camera USB Port Power In / Mass Storage (computer) MIC Microphone On | Off / Menu Down Recording On | Off / Menu Up 2) Rear Camera Power In + Video Out Live Video Source / Wi-Fi On | Off Video Protect / Playback / Menu Confirm Lens VIO FO Recording Status Indicator D 3) Bluetooth Remote Control (Optional) Wi-Fi Status Indicator MI
Product Overview Product Overview Inserting / Removing the memory card Note: Inserting the memory card The Micro SD card is sold separately. The microSD card must have a Class-10 or UHS-I rating and the capacity up to 128GB. 64 / 128GB micro SD cards must be formatted with the FAT32 file system, either on a computer or in the camera. Push the memory card into the card slot until you hear a click, with the card label facing the forward (away from the screen).
Product Overview Product Overview Buttons and Icons Mode Mode Buttons Buttons Behavior Behavior Back to previous menu / Stop playback Click once to enter the menu Menu up / Change playback speed / Delete the video Click once to start recording Standby Mode To enter playlist Playlist Mode Select the current / Play / Pause Menu down / Change playback speed / Lock current / Unlock current (Not Recording) Click once to enable / disable audio recording N/A Long press to enable the Wi-Fi Mode Butto
Installation Installation Installation Front camera installation 1) Insert the clips, then slide the mount horizontally into the slot on the back of camera. 5) Fix the front camera on the selected location. 6) Adjust the lens angle - Look at the live view on the LCD. - Adjust the angle of the lens up / down if necessary. 2) Select a location on the windshield rear of the rear-view mirror.
Installation Installation 2Connecting with Rear Camera Use the 6M / 20ft rear camera USB port Cable (with an L-shaped connector at one end) to connect the two cameras. The L-shaped connector plugs into the rear camera USB port of the front camera, while the other end plugs into the USB port of the rear camera. Cable routing should be as shown in the following two diagrams. Use the cable clips to help fix the two cables conveniently and safely.
Installation Operation Display Overview Tips 00:00:20 1. Do not install / mount the camera in a location that interferes with the driver’s visibility and safety. 2. Install / mount the camera close to the rearview mirror so that both sides of the scene being recorded are equally covered by the camera’s FOV (field of view). 3. To ensure a clear view on rainy days, the lens should be positioned within the windshield wiper’s sweeping range. 4. Do not install / mount the camera on or near airbag panels. 5.
Operation Operation Emergency Recording 1. Automatic emergency recording When the G-sensor is activated by a collision, the current footage will be locked automatically to avoid being overwritten by loop recording. Note: Collision sensing feature can be adjusted in settings under the “G-sensor” option. 2. Manual emergency recording Pressing the [ ] button during a recording will lock the current file being recorded. Once locked, the file will not be overwritten by the loop recording feature.
Operation Operation PIP Mode Firmware Upgrade There are four modes for live preview on the A129 LCD screen and Follow the instructions on this website to upgrade the firmware: via Wi-Fi while the rear camera is attached. (http://support.viofo.com/solution/folders/19000140970) Note: Picture in picture (PIP) mode is available only while the rear camera Note: is attached.
Setting System Settings • Resolution: Setting video resolution of footage recorded, Front camera only: 1920*1080P 60FPS, 1920*1080P 30FPS Front + Rear Camera: 1920*1080P 30FPS • Bitrate: You can set the bitrate for video. High bitrate may improve the quality and smoothness of the video, especially when recording fast motion or high contrast scenes. Using high bitrate mode may decrease the amount of recording time available on your memory card. Using low bitrate will save space and record for longer time.
Setting • Wi-Fi: Set it On / Off. Press the [ enable Wi-Fi quickly. ] button for 3 or 5 seconds to Setting unrecoverable. Make sure to back up all files that you needed before formatting. • Bluetooth Remote: Set it On / Off. • Format Warning: Set the number of days between format warnings. • Date Stamp: Imprint the time and date on the recorded video. • Default Setting: Restore device to factory settings.
Review and Control on Smartphone Review and Control on Smartphone The VIOFO app allows you to control your camera remotely by using a smartphone. Features include full camera control, live preview, playback and video recording. Turn on the Wi-Fi in the menu or long press the [ ] button. When the Wi-Fi is on, a Wi-Fi status icon and the password appear on the camera LCD screen.
Notice Customer Service Caution: Notice Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.