Copyright (c) 2018,Viofo Ltd, All rights reserved.
Table of Contents Table of Contents Product Overview Product Overview Product Overview 2 Standard Items Standard Items Optional Accessory Product Diagram Inserting / Removing the memory card LED Indicators Buttons and Icons Installation Front Camera Car Charger Adapter USB Data Cable Spare mount sticky pads 9 4M Car Charger USB Cable TM TM Front Camera Installation Rear Camera Installation Cable Connection Operation 14 Power On / Off Loop Recording Emergency Recording Playback Videos Motio
Product Overview Product Overview Product Diagram 1) Front Camera USB Power Port Mount Rear VIOFO AV Lens AV Out Power In / microSD Card Reader Mode (computer) USB Menu / Power On | Off REC Wi-Fi Rear Camera USB Port MIC Microphone On | Off / Menu Down Recording On | Off / Menu Up 2) Rear Camera (Optional) Live Video Source / Wi-Fi On | Off Video Protect / Playback / Menu Confirm Power In + Video Out Lens VIO FO Recording Status Indicator D 3) Bluetooth Remote Control (Optional) Wi-
Product Overview Product Overview Inserting / Removing the memory card Note: Inserting the memory card The Micro SD card is sold separately. The microSD card must have a Class-10 or UHS-I rating and the capacity up to 256GB. 64GB,128GB and 256GB micro SD cards must be formatted with the FAT32 file system, either on a computer or in the camera. Push the memory card into the card slot until you hear a click, with the card label facing the forward (away from the screen).
Product Overview Product Overview Buttons and Icons Mode Mode Buttons Buttons Behavior Behavior Back to previous menu / Stop playback Click once to enter the menu Menu up / Change playback speed / Delete the video Click once to start recording Standby Mode To enter playlist Playlist Mode Select the current / Play / Pause Menu down / Change playback speed / Lock current / Unlock current (Not Recording) Click once to enable / disable audio recording N/A Long press to enable the Wi-Fi Mode Butto
Installation Installation Installation Front camera installation 1) Insert the clips, then slide the mount horizontally into the slot on the back of camera. 5) Fix the front camera on the selected location. 6) Adjust the lens angle - Look at the live view on the LCD. - Adjust the angle of the lens up / down if necessary. 2) Select a location on the windshield rear of the rear-view mirror.
Installation Installation 2） Connecting with Rear Camera Power off the product and connect the rear camera cable to the front camera (main unit). Cable routing should be as shown in the following two diagrams. Use the cable clips to help fix the two cables conveniently and safely. 3) Peel the protection film off the sticky pad and camera lens. 4) Fix the rear camera on the selected location.
Installation Operation Display Overview Tips 00:00:20 1. Do not install / mount the camera in a location that interferes with the driver’s visibility and safety. 2. Install / mount the camera close to the rearview mirror so that both sides of the scene being recorded are equally covered by the camera’s FOV (field of view). 3. To ensure a clear view on rainy days, the lens should be positioned within the windshield wiper’s sweeping range. 4. Do not install / mount the camera on or near airbag panels. 5.
Operation Operation Emergency Recording 1. Automatic emergency recording When the G-sensor is activated by a collision, the current footage will be locked automatically to avoid being overwritten by loop recording. 2. Manual emergency recording Pressing the [ ] button during a recording will lock the current file being recorded. Once locked, the file will not be overwritten by the loop recording feature. Note: Collision sensing feature can be adjusted in settings under the “G-sensor” option.
Operation Operation View on a TV Mute The camera has an AV out port for connecting an external display During a private conversation, pressing the [ such as a monitor or TV. Please not that the product doesn't come the audio (Disable the microphone). ] button will mute supplied a 3.5mm male to 3 RCA AUX cable. PIP Mode There are four modes for live preview on the A129 LCD screen and via Wi-Fi while the rear camera is attached.
Setting System Settings You can set the product features according to your needs and preferences using the camera button or the VIOFO app. To enter the menu settings, please stop recording first.
Setting Setting “Dashcam Viewer” to playback videos and to visualize your position and speed on your computer. • Language: Set the on-screen display to English, Traditional Chinese, and French, etc. • Speed Unit: Kilometer per hour (KMH) and miles per hour (MPH) are available for speed unit. • Beep Sound: Turn all notification sounds On / Off. • G-Sensor: The G-sensor measures shock forces and locks the video recorded at the time.
Review and Control on Smartphone Review and Control on Smartphone The VIOFO app allows you to control your camera remotely by using a smartphone. Features include full camera control, live preview, playback and video recording. While the Wi-Fi enabled, the camera can be only controlled by VIOFO app. Turn on the Wi-Fi in the menu or long press the [ ] button. When the Wi-Fi is on, a Wi-Fi status icon and the password appear on the camera LCD screen.
Notice Customer Service Caution: Notice Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
