VLS-83 2.
Important Safety Instruction Thank you for purchasing the VLS-83 Soundbar. Please read this user manual carefully and keep for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number. Warning Caution: To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside.
6. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit. 7. The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the apparatus. 8. To prevent fire or shock hazard, do not expose this equipment to direct heat, rain, moisture or dust. 9.
10. Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damage in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 11. The AC plug is used to disconnect the device, the disconnected device should remain readily operable.
Important Notes • This sound bar was especially developed for LED/LCD/Plasma TV's: It should not be used in combination with CRTTV's (Cathode Ray Tube TV's) in order to avoid image interference. • Safety and operating instruction manual should be retained for future reference. • The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom. • Do not install the product in the following areas: • Places exposed to direct sunlight or close to radiators.
Product Diagram DISPLAY VOL+ COAXIAL INPUT STANDBY INPUT AUX VOL- OPTICAL AC IN 6
Remote Control Standby mode for power on/off. Volume increase. Prev song.(only work under BT mode.) Volume decrease. OPTICAL selection. Select the MUSIC EQ effect. Select the Movie EQ effect. Mute mode. Play/Pause/Reset Next song.(only work under BT mode.) AUX selection. COAXIAL selection. Press and hold more than 2 sec. to disconnect paired BT device. Press within 2 sec. to be BT mode.
Mount on the wall WARNING: If you don’t feel confident to correctly and securely wall-mount the sound bar, Seek the assistance of an experienced person of professional. Install the speaker on a vertical, fast, reinforced area of wall. For plaster walls, it is recommended to screw into wall studs for greater security. For optimum performance, allow at least 25mm/1’’distance between the sound bar and the TV. 25mm / 1” 25mm / 1” Follow below steps to mount the sound bar on the wall 1.
OPERATE INSTRUCTIONS Setting the Soundbar 1: Plug in the power cord and the display will light up (Standby mode) 2: Switch on the soundbar by using power button on soundbar of by using STANDBY button on remote.
Playing Audio via BT Connection 1.. Turn on sound bar and then short-press the multi-function button to switch to BT mode and the LED will show ( ) 2. Activate the pairing function on your phone of other compatible device and select “VLS-83 Vinoil” 3. When successfully paired, you will hear a tone and the LED indicator will stay on 4.
• Switch the TV set and sound bar on. Set the connected TV to “PCM Stereo” or “Stereo 2.0”. • Start playing on the TV. • Press the “OPTICAL” button on the remote control to select this mode. • You can use the volume buttons to adjust the volume to your requirements. • If you wish, you can change the audio settings using the relevant buttons on the remote control. 1.6m optical cable Coaxial mode 1. Connect the soundbar to your TV using coaxial cable, fully inserting the connectors so they click in. 2.
Specifications Model VLS-83 Technology BT/OPT/COA/AUX Drivers 1.75*2+2.75"*2 Audio Output Power 20W*2+40W=80W R.M.S. Frequency Response 70Hz~20KHz Signal-to-Noise Ratio 72dB lmpedance 4Ω*2+3Ω*2 Power lnput SMPS 110V-240V~50Hz/60Hz Bluetooth Operating Range Version: 4.2 Range:up to 10m Dimensions 84.5H*108D*900L mm Package Contents Sound bar X 1 1.6m optical cable X 1 Remote Control X 1 1.6m line-in Wall Mount EVA Pads X 2 User Manual X 1 1.
After Using the Soundbar System set it to standby Care and Cleaning 1. All care and cleaning operations should be carried out with the unit unplugged from the mainpower. 2. The surface of the unit can be cleaned with a slightly damp cloth and then dried carefully. 3. Never use abrasives, abrasive cloths or chemical solvents. Loudspeaker grilles can be cleaned carefully with a soft brush. LIMITED WARRANTY We take quality very seriously.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Need support,please contact ct support@vinoilmusic.com For warranty issues, contact ct warranty@vinoilmusic.