Vincent Bedienungsanleitung deutsch Instructions for use english Manuel d‘utilisation français SA-94 Stereovorverstärker Stereo Preamplifier Préamplificateur stéréo
Sehr geehrter Kunde, wir danken Ihnen für das Vertrauen, welches Sie uns durch die Entscheidung für dieses hochwertige AudioProdukt, das Ihrem hohen Anspruch an Klang- und Verarbeitungsqualität gerecht wird, entgegenbringen. Auch wenn Sie verständlicherweise sofort beginnen wollen, das Gerät zu verwenden, lesen Sie bitte vor dem Aufstellen und Anschließen dieses Handbuch sorgfältig durch.
INHALTSVERZEICHNIS/CONTENTS/SOMMAIRE Sicherheitshinweise Weitere Hinweise Lieferumfang Beschreibung des Gerätes Fernbedienung Installation Bedienung des Gerätes Weitere Tipps Fehlertabelle Technische Daten Lexikon/Wissenswertes 4 5 6 6 9 11 16 17 18 20 21 deutsch Safety guidelines Other instructions Included in delivery Description of the appliance Remote control Installation Operating the appliance Tips Search for errors Technical Specifications Glossary 22 23 24 24 27 29 34 35 36 38 39 english Consign
SICHERHEITSHINWEISE Dieses Gerät wurde unter strengen Qualitätskontrollen gefertigt. Es entspricht allen festgelegten internationalen Sicherheitsstandards. Trotzdem sollten folgende Hinweise vollständig gelesen und beachtet werden, um eine Gefährdung zu vermeiden: Das Gerät nicht öffnen! Gefahr des elektrischen Schocks! Es befinden sich keine vom Benutzer zu wartenden Teile im Gerät.
WEITERE HINWEISE Aufstellen des Gerätes Die Art der Aufstellung der Anlage hat klangliche Auswirkungen. Stellen Sie diese deshalb nur auf eine dafür geeignete, stabile Unterlage. Um das Klangpotential Ihres Systems optimal auszunutzen, empfehlen wir, die Geräte auf Vincent Racks zu platzieren und nicht aufeinander zu stellen.
LIEFERUMFANG Bitte prüfen Sie den Inhalt der Verpackung, diese sollte zusätzlich zum Gerät folgendes Zubehör enthalten: • 1 Fernbedienung VRC-1 • 2 Batterien vom Typ AAA (LR3) • 1 Paar XLR-Kabel für die Verbindung zwischen Vorverstärker und Endverstärker • 1 Netzkabel • dieses Handbuch BESCHREIBUNG DES GERÄTES Obwohl die Entwicklung stetig in Richtung digitaler Tonformate und mehrkanaliger Audio-VideoSysteme geht, erfreuen sich hochwertige Stereoanlagen weiterhin großer Beliebtheit.
VORDERANSICHT 1 2 3 1. POWER: Netzschalter Schaltet das Gerät ein und aus, das Gerät ist im ausgeschalteten Zustand vom Netz getrennt. 2. MUTE: Taste für die Wiedergabestummschaltung Schaltet das Ausgangssignal der Vorstufe ab und damit die Lautsprecher oder Kopfhörer des Systems stumm. 3. Empfängerdiode für die Fernbedienung 4. Anzeige Stellt im normalen Betrieb den Namen des gewählten Eingangskanals und die Lautstärkeein- 5 4 6 stellung dar.
RÜCKANSICHT 7 8 7. INPUT: Eingangsanschlüsse (1xXLR, 5xCinch) Hier können bis zu fünf Quellgeräte mit CinchAusgang sowie ein Quellgerät mit XLR-Ausgang (BALANCED) angeschlossen werden. 8. REC OUTPUT: Aufnahmeausgang Schließen Sie hier, wenn gewünscht, z.B. ein Aufnahmegerät an. Das Stereo-Signal dieses Ausgangs ist mit dem Ausgangssignal der momentan gewählten Quelle an einem der „INPUT“Cinch-Anschlüsse identisch und unabhängig von Lautstärkeregelung, Kanalbalance und GAINFunktion.
FERNBEDIENUNG Richten Sie die Fernbedienung mit deren Vorderseite direkt auf die Gerätefront, zwischen Fernbedienung und Gerät dürfen sich keine Gegenstände befinden. Achten Sie darauf dass Sie die Fernbedienung nicht schräg auf das Gerät richten, außerhalb eines Winkels von ±30° zur Mittelachse reagiert das Gerät eventuell schlechter auf Bedienversuche.
TASTEN FERNBEDIENUNG 12. MUTE: Taste für die Stummschaltung Mit dieser Taste schalten Sie die Ausgangssignale der Vorstufenausgänge „OUTPUT“ (9) sowie den Aufnahmeausgang „REC OUTPUT“ (8) ab. 12 15 13. BAL-L und BAL-R Stellen Sie hiermit, wenn gewünscht, den Lautstärkeunterschied zwischen rechtem und linkem Stereokanal ein. 13 14. Eingangswahltasten Diese Tasten dienen der Auswahl des Eingangsgerätes, das Sie hören möchten. 14 16 15.
INSTALLATION Stellen Sie die Kabelverbindung in der nachfolgend genannten Reihenfolge her. Bringen Sie erst zuletzt das Netzkabel an und verbinden es mit der Steckdose. ZUR BESONDEREN BEACHTUNG Entfernen der Schutzkappen Vor der ersten Installation müssen von allen verwendeten Anschlüssen an der Geräterückseite die Kunststoff-Schutzkappen entfernt werden. 1 2 Fall, wenn beide von Vincent hergestellt wurden. Werden zwei Geräte unterschiedlicher Norm verbunden, wird dadurch das Signal invertiert.
ANSCHLUSS DER QUELLGERÄTE MIT CINCH-HOCHPEGELAUSGANG Verbinden Sie die Ausgänge dieser Quellgeräte mit den Eingängen „LINE1“ ... „LINE5“ (7) des Verstärkers. Meist sind die Ausgangsanschlüsse der Quellgeräte mit „LINE OUT“, „AUDIO OUT“ oder „FRONT OUT“ markiert. Informationen über die Anschlussmöglichkeiten der Quellgeräte finden Sie in deren Bedienungsanleitungen. Cinch-Verbindung SA-94 CD-Player, Tuner, DVD-Player, etc.
ANSCHLUSS EINES AUFNAHMEGERÄTES An die Cinch-Buchsen „REC OUTPUT“ (8) auf der Rückseite des Gerätes können Sie, wenn gewünscht, ein analoges Stereo-Aufnahmegerät (z.B. CD-Recorder, Kassettenrecorder o. ä.) oder ein anderes Gerät, das den unveränderten, fest eingestellten Stereo-Ausgangspegel (Line-Pegel) der momentan an der Vorstufe gewählten Signalquelle erhalten soll, anschließen. Der Ausgangspegel ist unabhängig von der Lautstärkeeinstellung (VOLUME, LEVEL), der Kanal-BALANCE und der GAIN-Funktion.
ANSCHLUSS EINES ODER MEHRERER ENDVERSTÄRKER Es können bis zu sechs Endstufenkanäle angeschlossen und somit bis zu sechs Lautsprecher im System betrieben werden. Das Musik-Stereosignal wird sowohl an den beiden Cinch-Anschlusspaaren (1,2) als auch an dem XLR-Anschlusspaar (BALANCED) gleichzeitig ausgegeben. Die angeschlossenen Endverstärker versorgen die Lautsprecher des Systems, die Lautsprecher werden an die Ausgänge der Endverstärker angeschlossen.
KABELVERBINDUNGEN FÜR DIE EINSCHALTSTEUERUNG (POWER CONTROL) Viele AV-Systeme bestehen aus einer Vielzahl von Einzelkomponenten. Um diese nicht vor und nach jedem Gebrauch alle einzeln aus- und einzuschalten, haben manche Hersteller die Geräte mit einer so genannten „POWER CONTROL“-Schaltung, auch „TRIGGER“ oder „Einschaltsteuerung“ genannt, ausgestattet. Vor allem für Vor- und Endstufen wird diese Art der ferngesteuerten Standby-Schaltung verwendet.
BEDIENUNG DES GERÄTES Aktion Taste(n) Beschreibung Ein- und Ausschalten POWER (1) Das Gerät wird an der Gerätevorderseite ein- und ausgeschaltet. Ist der Schalter in der Ausschaltposition, ist das Gerät vom Stromnetz getrennt. Das Gerät besitzt keine Funktion der Betriebsbereitschaft (Standby). Wenn Sie den Einschalter betätigt haben, dauert es ca. vier Sekunden, bis das Gerät betriebsbereit ist. Direkt nach dem Einschalten sollte vorsichtshalber die Lautstärkeeinstellung der Vorstufe reduziert werden.
WEITERE TIPPS Einspielzeit / Aufwärmen Ihre Audio-Geräte benötigen eine gewisse Zeit bis sie ihre klangliche Höchstleistung erreichen. Dieser Zeitraum ist für die verschiedenen Komponenten Ihres Systems sehr unterschiedlich. Bessere und gleichförmigere Leistung erhalten Sie während der Zeit, die das Gerät eingeschaltet bleibt.
FEHLERSUCHE Symptom Mögliche Fehlerursache Abhilfe Keine Funktion nach Betätigung des Netzschalters Netzkabel nicht an eine betriebsbereite Steckdose angeschlossen. Stellen Sie eine Verbindung zu einer funktionierenden Steckdose mit der geeigneten Netzspannung her. Netzkabel nicht fest in die Steckdose und die Gerätebuchse gesteckt oder defekt.
FEHLERSUCHE Symptom Mögliche Fehlerursache Abhilfe Schlechte Tonqualität Anschlüsse der Kabelverbindungen sind lose, die Anschlüsse verschmutzt oder ein Kabel defekt. Prüfen Sie die Audio-Anschlüsse. Ein Plattenspieler wurde ohne zwischengeschaltete Entzerrervorstufe (Phonovorstufe) an einen der Hochpegeleingänge angeschlossen. Schließen Sie eine Phonovorstufe im Signalweg zwischen Plattenspieler und Vorverstärker an.
TECHNISCHE DATEN Frequenzgang: Nenn-Ausgangsspannung: Klirrfaktor: Eingangsempfindlichkeit: Signal-Rausch-Abstand: Kanaltrennung: Eingangsimpedanz: Netzanschluss: Eingänge: Ausgänge: Maße: Gewicht: Farbe: 20 Vincent 10 Hz - 20 kHz 2V < 0,1% (20Hz-20kHz) 380 mV > 95 dB > 86 dB 47 kΩ 220 V – 240 V / 50 Hz (max.
LEXIKON/WISSENSWERTES Audio-Quellen/Audio-Quellgeräte Komponenten Ihrer HiFi-Anlage und alle weiteren Geräte, deren Ton Sie über das System hören möchten und dazu an den Vor-, Vollverstärker oder Receiver anschließen. Dazu gehören CD-Player, DVD-Player, Tuner (Radios), Kassettenspieler, DATRecorder, Personalcomputer, Schallplattenspieler, portable Audiogeräte und viele weitere.
SAFETY GUIDELINES This appliance was produced under strict quality controls. It complies with all established international safety standards. Nonetheless, the following instructions should be fully read and observed in order to prevent any hazard: Do not open the appliance! Risk of electric shock! There are no parts in the appliance that require maintenance by the user.
OTHER INSTRUCTIONS Setting up the appliance How the system is set up has an effect on the sound quality. Therefore only place it on a suitable, stable surface. To make the most of your system’s sound quality, we recommend placing the equipment on Vincent racks and not putting them on top of each other. Old electronic equipment This appliance is subject to the conditions set out in the European Directive 2002/96/EC. This is identified by the symbol of a crossed out waste bin on the appliance.
INCLUDED IN DELIVERY Please check the contents of the packaging, which in addition to the appliance should contain the following accessories: • 1 remote control “VRC-1” • 2 battery cells size AAA (LR3) • 1 stereo set of XLR cables to connect the main amplifier • 1 power cable • this manual DESCRIPTION OF THE APPLIANCE Despite the fact that development is constantly moving in the direction of digital audio format and towards audio video systems with an increasing number of channels, high quality stereo syst
FRONT VIEW 1 2 3 1. POWER This is the main power switch for turning on and off the device. The preamplifier is separated from the mains voltage when switched off and cannot be set into a standby state. 2. MUTE Press this button to mute your system’s loudspeakers as an effect of muting the signals of the preamplifier output “OUTPUT” (9), and the recording output “REC OUTPUT” (8). 3. Sensor diode for the remote control 4.
REAR VIEW 7 8 7. INPUT: Terminal for stereo audio signals of the source equipment Here you find six stereo inputs for source equipment (5x RCA, 1x XLR) with analogue stereo (line level) audio output. 8. REC OUTPUT: Output connectors assigned to a recording device If desired, you can connect a recording device like a CD recorder or a tape recorder to this output.
REMOTE CONTROL Point the front of the remote control directly at the front of the appliance, making sure there are no objects between the remote control and the appliance. The distance between the remote control and the appliance should not be more than 7 m, as the reliability of the remote control is affected beyond this range.
BUTTONS OF THE REMOTE CONTROL 12 15 12. MUTE Pressing this button once cuts the signals at the outputs “OUTPUT” (9) and “REC OUTPUT” (8) so that the system’s loudspeakers are muted. Pressing it again returns to the original volume. 13. BAL-L und BAL-R Both keys can be used to change the volume difference between right and left speaker if that is desired. 13 14 16 14. Input selector keys Select the input source you want to listen to with these buttons. 15.
INSTALLATION Set up the cable links in a sequence as follows. Connect the power cable between device and power supply only after all other connections have been made. DURING INSTALLATION PLEASE OBSERVE THE FOLLOWING ADVICE: Protective caps Prior to the first installation the protective plastic caps must be removed from all the connections used at the rear of the unit.
CONNECTION OF THE SOURCE EQUIPMENT WITH RCA OUTPUT Connect the outputs of the source appliances to the inputs “LINE1”...”LINE5” (7) of this preamplifier. The output sockets on the source equipment are usually indicated by “LINE OUT”, “AUDIO OUT” or “FRONT OUT”. You will find information about ways to connect source equipment in their operating manuals. RCA connection SA-94 CD player, tuner etc.
CONNECTION OF A RECORDING DEVICE If you want, you can use the RCA sockets “REC OUTPUT” (8) on the back of the appliance to connect an analogue stereo recording device (e.g. CD recorder, cassette recorder etc.) or another appliance that is intended to receive the unchanged, fixed stereo output level (line level) from the signal source selected on the amplifier at any given time. The output level is independent of the VOLUME level, the channel BALANCE and the GAIN function.
CONNECTION OF ONE OR MORE POWER AMPLIFIERS This preamplifier has two stereo preamplifier outputs with RCA connectors and one stereo preamplifier output with XLR connectors for the main amplifier channels. In this way it is possible to drive up to six loudspeakers (or bi-wire/bi-amp one pair of loudspeakers). The stereo music signal is transmitted at both RCA outputs (1, 2) as well as at the XLR output (BALANCED) at the same time.
CONNECTIONS FOR THE STANDBY CONTROL (POWER CONTROL) Many AV systems or stereo audio systems consist of a multitude of individual components. To avoid the necessity of switching them on and off before and after every use, many manufacturers have equipped their devices with what is known as “POWER CONTROL” circuit or “TRIGGER”. This kind of remote-controlled standby circuit is used primarily for preamplifier and power amplifiers.
OPERATING THE APPLIANCE Operation Switch on and off Select an input Button(s) Description POWER (1) The preamplifier is switched on and off using this button at the front panel. It has no standby option. When switched off the device is internally separated from the AC power. After switching on, the device needs up to four seconds before it is operational. As a precaution, after switching on, the volume setting of the preamplifier should be reduced.
TIPS Burn in/ Warm up Your audio components need a certain time period until they reach maximum performance. The duration of this “warm up“ time is very different for the various elements of your audio system. Higher and more homogeneous sound quality is achieved while keeping the device switched on. Your audio specialist dealer has enough experience to give you more information.
SEARCH FOR ERRORS Symptom Possible Cause Countermeasure Unit does not work after pressing the power button Mains cable is not connected to a suitable mains wall outlet. Connect to a functioning socket using a suitable mains voltage. Mains cable has not been firmly inserted into wall power socket and the device’s socket. Otherwise it may be defective. Check the power cable. If necessary, exchange it with a suitable mains cable and push its plug firmly into wall socket and the device's power connector.
SEARCH FOR ERRORS Symptom Possible Cause Countermeasure Poor sound quality The cable connections are not tight, the connectors are dirty or a cable is defective. Check the cables and cable connections. A record player has been connected to a line level input without using a phono preamplifier. Interconnect a phono preamplifier. No batteries inserted in the remote control, batteries are not inserted correctly or are depleted. Check and replace the batteries if necessary.
TECHNICAL SPECIFICATIONS Frequency response: Nominal Output Voltage: Total Harmonic Distortion: Input sensitivity: Signal to Noise Ratio: Channel Separation: Input Impedance: AC power connection type: Inputs: Outputs: Dimensions (W x H x D): Weight: Colour: 38 Vincent 10 Hz - 20 kHz 2V < 0.1% (20Hz-20kHz) 380 mV > 95 dB > 86 dB 47 kΩ 220 V – 240 V / 50 Hz (max.
GLOSSARY Audio Sources/Source devices These are the components of your HiFi system and all other appliances, whose sound you want to hear over the system and are thus connected to the preamplifier, amplifier or receiver. This includes CD players, DVD players, FM tuners, cassette players, DAT recorders, personal computers, record players, portable audio devices and many more.
CONSIGNES DE SECURITE La construction de cet appareil a été soumise à des contrôles de qualité très stricts. Il répond à toutes les normes internationales de sécurité. Il est cependant nécessaire de lire entièrement les consignes suivantes et de les appliquer pour éviter tout danger : Ne pas ouvrir l'appareil! Danger de décharge électrique! Aucune pièce à entretenir par l'utilisateur ne se trouve dans l'appareil.
AUTRES CONSIGNES Montage de l'appareil Le site de montage de l'appareil a une incidence sur le son. Posez l'appareil uniquement sur une surface appropriée et stable. Pour profiter pleinement du potentiel sonore de votre système, nous vous recommandons de placer les appareils sur des racks Vincent et de ne pas les poser l'un sur l'autre. Appareils électroniques usagés Cet appareil est soumis aux dispositions fixées dans la directive européenne 2002/96/ CE.
CONTENU DE LA LIVRAISON Veuillez contrôler le contenu de l’emballage. Les accessoires suivants doivent être joints à l’appareil : • 1 télécommande VRC-1 • 2 piles de type AAA (LR3) • 2 câbles audio XLR • le présent manuel • 1 câble de distribution DESCRIPTION DE L'APPAREIL Bien que le développement se dirige constamment vers des formats de son numériques et des systèmes audio-vidéo à plusieurs canaux, les chaînes stéréo de haute qualité jouissent à l’ avenir, de la grande popularité.
FACADE AVANT 1 2 3 1. POWER : Interrupteur secteur Met l’appareil en MARCHE ou à l’ARRET, à l’ARRET, l’appareil est coupé de l’alimentation secteur. 2. MUTE : Volume-enclenchement du mode silencieux Avec cette touche, les signaux des sorties du préampli « OUTPUT » (9) ainsi que la sortie pour enregistrement « REC OUTPUT » (8) sont mis en sourdine. 3. Récepteur infrarouge de la télécommande 5 4 6 4.
FACADE ARRIERE 7 8 7. INPUT : raccordement d’appareils source (1xXLR, 5xRCA) Vous pouvez raccorder à cette entrée jusqu’à cinq appareils source avec connecteurs RCA et un appareil source avec connecteurs XLR (BALANCED). 8. REC OUTPUT : sortie pour enregistrement Sert à raccorder, si souhaité, par exemple un appareil d’enregistrement. Le signal stéréo de cette sortie, est identique à celui du signal de sortie de la source actuellement sélectionnée à l’une des bornes « LINE1 » ...
TELECOMMANDE Orientez la partie avant de la télécommande directement vers la face de l'appareil. Aucun obstacle ne doit se trouver entre la télécommande et l'appareil. La distance entre la télécommande et l'appareil ne doit pas être supérieure à 7m, car la fiabilité de la télécommande diminue au-delà de cette portée.
TOUCHES DE LA TELECOMMANDE 12. MUTE : touche de mise en sourdine Cette touche coupe les signaux de la sortie « OUTPUT » (9) et la sortie d’enregistrement « REC OUTPUT » (8). 12 15 13. BAL-L et BAL-R Si vous le souhaitez, vous pouvez régler la différence de niveau du volume entre le canal gauche et le canal droit. 13 14. Touches de sélection d’entrées Servent à la sélection de l’appareil source raccordé, dont on veut écouter la reproduction. 14 16 15.
INSTALLATION Réalisez d’abord le raccordement des câbles pour la sortie du signal de l’appareil. Raccordez alors seulement le cordon secteur et reliez-le à la prise secteur. VEUILLEZ TENIR COMPTE DES INSTRUCTIONS SUIVANTES LORS DE L’INSTALLATION : Dépose du capot de protection Avant la première installation, retirez les capuchons de protection des connecteurs à utiliser, situés sur la façade arrière de l’appareil.
RACCORDEMENT DES APPAREILS SOURCE AVEC LA SORTIE RCA Raccordez les sorties de ces appareils source avec les entrées « LINE1 » ... « LINE5 » (7) de l’amplificateur. La plupart des bornes de sortie sont désignées par « LINE OUT », « AUDIO OUT » ou « FRONT OUT ». Vous trouverez des informations sur les possibilités de raccordement des appareils source dans leur mode d’emploi. Connexion RCA SA-94 p. ex.
RACCORDEMENT D’UN APPAREIL D’ENREGISTREMENT Vous pouvez raccorder aux prises « REC OUTPUT » (8) de la zone de raccordements à l’arrière de l’appareil, si vous le souhaitez, un appareil d’enregistrement (par ex. un enregistreur de CD, de cassettes ou similaire) ou un autre appareil, qui doit recevoir le niveau de sortie stéréo (niveau sonore de ligne), non modifié, fixement réglé du son de la source de signal sélectionnée au préamplificateur.
RACCORDEMENT A UN OU A PLUSIEURS AMPLIFICATEURS DE PUISSANCE Près de six canaux d’amplificateurs de puissance (3x stéréo) peuvent être connectés et ainsi aussi soit plus de deux haut-parleurs ou deux haut-parleurs dans le Bi-Amping (p. ex. avec deux amplificateurs de puissance stéréo) sont exploités. Le signal musique stéréo est perceptible simultanément à travers les paires de raccord RCA (1,2) et la paire de raccord XLR (BALANCED).
CONNEXION DES CABLES POUR LA COMMANDE DE MISE SOUS TENSION (POWER CONTROL) De nombreux systèmes AV et quelques systèmes stéréo se composent de nombreux composants individuels. Pour éviter de les mettre en marche et de les arrêter l’un après l’autre à chaque utilisation, certains fabricants ont équipé les appareils avec un circuit appelé « Power Control », ou aussi « Trigger » ou encore « Commande de mise sous tension ».
UTILISATION DE L’APPAREIL Action Touche(s) Description Mise en marche et arrêt POWER (1) L’appareil n’a pas de mise en veille, il est mis en marche et arrêté par le commutateur en façade avant. En position arrêt, il n’est plus sous tension. Lorsque le commutateur est actif, vous devez patientez environ quatre secondes pour que l’appareil se mette en marche. Directement après la mise en marche, le réglage du volume de l’amplificateur devrait être réduit par précaution.
CONSEILS Temps de rodage / échauffement Vos appareils audio demandent un certain temps pour atteindre leurs performances maximales. Ce laps de temps est très différent pour les différents composants de votre système. Vous obtiendrez un son de meilleure qualité et plus homogène en laissant l’appareil sous tension. Profitez de l’expérience de votre revendeur! Une autre cause possible du ronflement est une interférence électromagnétique entre l’alimentation d’autres appareils (p. ex.
RESOLUTION DE PROBLEMES Symptôme Cause possible du défaut Remède Pas de fonctionnement après mise en marche du commutateur secteur Le cordon secteur n’est pas relié à une prise opérationnelle. Réalisez une liaison à une prise opérationnelle avec la tension appropriée. Le cordon secteur est défectueux ou il n’est pas entièrement enfoncé dans la prise secteur ou celle de l’appareil.
RESOLUTION DE PROBLEMES Symptôme Cause possible du défaut Remède Mauvaise qualité du son Les connexions des liaisons par câble sont desserrées, les connexions encrassées ou un câble est défectueux. Vérifiez les connexions audio et les câbles. Une platine a été raccordée à un niveau élevé sans un préamplificateur phono. Raccordez un préamplificateur phono. Absence de piles dans la télécommande, erreur de montage des piles ou les piles sont vides. Vérifiez et remplacez les piles si nécessaire.
CARACTERISTIQUES TECHNIQUES Plage de transmission : Tension nominale : Facteur de distorsion : Sensibilité d’entrée : Rapport signal/bruit : Séparation des canaux : Impédance d’entrée : Alimentation : Entrées : Sorties : Dimensions (L x H x P) : Poids : Variante de couleur : 56 Vincent 10 Hz - 20 kHz 2V < 0,1% (20 Hz – 20 kHz) 380 mV > 95 dB > 86 dB 47 kΩ 220 V ~ 240 V / 50 Hz (max.
GLOSSAIRE Sources audio/lecteurs sources Composants de votre chaîne hi-fi et tous les autres appareils dont vous voulez écouter le son via le système en les branchant au préamplificateur ou à l’amplificateur intégré. Cela comprend les lecteurs de CD, les lecteurs de DVD, les tuners (radios), les lecteurs de cassettes, les enregistreurs DAT, les ordinateurs personnels, les platines tourne-disque, les lecteurs audio portables et bien d’autres.
NOTIZEN / NOTES 58 Vincent
NOTIZEN / NOTES Vincent 59
Vincent Bewahren Sie die Kaufquittung zusammen mit der Bedienungsanleitung auf. Die Kaufquittung dient Ihnen als Nachweis für den Beginn der Garantiezeit. Die Seriennummer befindet sich an der Rückseite des Gerätes. Please keep the receipt, store it together with this manual. The receipt is your proof for the beginning of the warranty period. Note the serial number in the following box, you can read it from the rear side of the device. Gardez soigneusement la facture d'achat et le mode d'emploi.