Installation Guide

ManualsBrandsVillage Ironsmith ManualsLumber & Composites4 ft. Metropolitan Rail

DESIGN &

INSTALLATION GUIDE

*CHECK LOCAL BUILDING CODES FOR REQUIRED

PRODUCT AND INSTALLATION SPECIFICATIONS.

With the Village Ironsmith

™

railing and column systems, it's easy

to plan, select the right products and create a complete and

coordinated installation.

Step 1: Select Your Rail System Step 2: Plan Your Project

Easy-Do-It-Yourself Installation

On the grid, sketch the lines of your new railings and columns.

Mark the location of all posts and columns. Count the number of

rail sections for each length, columns and posts and enter on

Shopping Worksheet.

• Add one Floor Flange for each post needed to complete the job.

• If mounting on Wood, use Lag Screws (LS100).

• If Concrete, use Masonry Anchors (MA100). One package of each

per post.

• Add the connectors (one package of connectors per rail section).

Note: FOR ALL RAIL SECTIONS

All Rails are sold in 4' and 6' sections and can be cut to length.

Note: FOR COLUMNS

If columns are part of your installation, enter the appropriate

number of flat and/or corner columns and sockets on the

worksheet.

Column Sockets needed: Flat Columns = 1 package.

Corner columns = 2 packages.

4 ft. Rails

6 ft. Rails 6 ft. 1 1/4 in.

6 ft. 1 1/4 in.

4 ft. 1 1/4 in.

Classic

Rails

using NP125 posts

Metropolitan

™

Rails

using MP125 posts

Widths of columns

are 9 inches

CORNER

FLAT

ON-CENTER SPACING FOR POSTS

METROPOLITAN

™

1 1/4" RAILS

• Rails: 1 1/4" wide x 7/8" deep

• Pickets: 1/2" x 1/2" vertical pickets

• Spacing: 4" on center vertical

• Installed Height: 36" - Full Panel

CLASSIC

1 1/4" RAILS

• Rails: 1 1/4" wide x 7/8"

• Pickets: Heavy-duty twisted vertical spindles

• Spacing: 6" on center vertical

• Installed Height: 32"

ND125

NP125

MP125

MA100

FF125

LS100

V500

LT200

ST100

MASONRY ANCHORS

To secure flanges to concrete

surface - 1 pkq. per flange

STUB SUPPORT

- To add support to rails

1 per rail

LAMBS TONGUES

- For decorative touch to posts

at ends of run

LAG SCREWS

To secure flanges to wood

surface - 1 pkq. per flange

CONNECTORS

- To mount Rails

to post - 1 Pkg. per rail section

NEWEL POSTS

FLOOR FLANGES

To mount

post to surface - 1 per post

Description

ND125

NP125MP125