Register the 24-month Warranty Online and Claim a Free Prize Scan QR Code or visit fo know more We hope you never have the need, but if you do, please do not hesitate to contact ust Our service is friendly and hassle-free.
2 ADDITIONAL WARNINGS AND PRECAUTIONS 1. Do not lock directly info the projector light. 2. Don’t touch the project lens 3. Mains adapter is used as disconnect device and it should remain readily operable during intended use. in order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 4. Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. 5.
8 sorviceBviinicelfe.com FCC WARNING This device complies with Part 15 of the FCC rules. Operation ke subject to the following two conditions: (1) this device may not cause harmful Interference, and (2) this devices must accept any Interference reoccurred, In duding Interference that may cause undesired operation. NOTE: This equipment has been tested and found fo comply with the limits for a Class B digital device, pursuant to Part 16 of the FCC Rules.
2 12 345 PRODUCT OVERVIEW 91011 12131418 POWER Button RETURN (3) Button NAVIGATION MENU = Bunion SOURCE"S Button Keystone Correction Focusing Ring LENS . Headphone Jack 10.
2 Power Sassafras Press to changes media Menu Aral Back power on the source mode. Presto copses Press te Pastoral return pro scion. on-angora navigate anti a previous 2 © . Tass twice io prows menus and screen mans page or setting tae at options. and make interconnections Serest Menus. Follow below picture to connect power adapter Connect small end of adapter first. Plug the adapter body to power outlet.
2 Power Press to power ON. Press twice to power OFF. BEd Previous / Het BRE Press to skip between chapters or tracks. Flip Press to flip display image 150°. Pl Play/Pause Press to pay of pause an individual chapter or track. Camerawork Press to navigate snd confirm selections in Settings and other menus. Hera Press to access projector Settings. Go Tom umber Keypad Press to enter specific chapter of track numbers. Use Play button to begin playing. [lo Press to seacoast picture settings.
2 REMOVE & CLOSE THE LENS COVER Remove the lens cover before using Close the Lang cover when unit not using § PENOLOGY CLOSE LENS COVER | LENS COVER Your projector can be installed in four different configurations { see picture below): Front Table: Select this location with the projector placed near the floor in front of the screen. This is the § most common way fo position the projector for quick setup and portability.
2 TO REDUCE IMAGE DISTORTION Square Rectangle PLACING YOUR PROJECTOR ON CEILING When installing the projector in the selling, please purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount. Before installing the projector in the ceiling, please check to make sure the ceiling structure can support the weight of the projector and the mount. If in doubt, please ask the advice from an installation professorial.
2 ADJUST THE VERTICAL LOCATION SCREEN ¢ PROJECTOR VERTICAL Adjust this knob (Adjusting Knob) SCREEN VERTICAL DIMENSION | SCREEN VERTICAL DIMENSION TO REDUCE IMAGE DISTORTION Adjust the focus by muting the knob while observing the image pixels near the center of the screen. Optimal focus is obtained when the pixels are clearly visible. Depending on the projected screen size, the focus near the screen edges may be less sharp than the screen center.
£ senice@Jlinicellfe com CONNECTING Connect an Radiophone 1, Press the signal source key "8S" of the projector or the remote control and select "Miscast. 2, Plug an original USB charging cable into the USB port of this projector. 3, Please select "Trust this device” when the iPhone asks Trust” or "Don't trust’, and enter the Your iPhone password to connect. Connect an Android Phone/Tablet bs Press the signal source key "S$" of the projector or the remote control and select "Miscast.
2 CONNECTING Connect an iPhone/Pad 1, Press the signal source key "S$" of the projector or the remote control and select "Miscast. 2, Open the wife in the Phone settings, search and select projector potshot enter password to connect (Note: The potshot name is on the screen "SAID: the password is "PSK: 3, Slide the phone interface from the bottom up fo enter the control central {Full-screen phones slide down from above, those with home button slide up from below), then open "Screen Mirroring *.
2 CONNECTING Connect an iPhone/Pad 1, Press the signal source key "8" of the projector or the remote control and select "Miscast. 2, Open the wife in the Phone settings, search and select projector potshot enter password to connect (Note: The potshot name is on the screen "SAID: the password is "PSK: }. After successful connection, scan the OR code on the interface to log in to the projector setup interface.
£ senice@Jlinicellfe com PROJECTOR SETTING INTERFACE, AS FOLLOWING: x Welshing Satin = Set up a projector or Dongle to connect to the router Bet the playback mode when 108 devices are wired io the same screen. Set up the device name Set up the device password Set up the device mode = Sel up the device output resolution . i Set up the device input the phonetically screen Bet up the device languages So Set up 108 device wireless screen mirroring playback mods ~~ Set up the device OTA upgrades .
£ senice@Jlinicellfe com CONNECTING it works with you tube, chrome, safari, face time when you connect it to a smartphone directly. And it doesn't support play protected video when you connect it to your smartphone directly. (Netflix, Prime video, Hutu, etc} Due to these video have an encryption protocol, the projector has no right to recognized when it is connected directly to the phone via the USB interface.
8 CONNECTING HDMI CABLE Video Player In rare cases, if the projector's speaker has ne sound when playing a DVD movie in a player congealing to the HDM! input, please check the player's digital audio settings and make sure iris set to “Auto” mode or “PCM” mode. Follow below picture fo connect AV cable and device. 1. Tum off the unit before connect AV cable. 2. Use AV cable to connect follow below figure 3. After connect, press the ©) button to turn on unit and power indicator will light GREEN 4.
2 CONNECTING Follow below picture to connect VGA cable and device. 1. Tum off the unit before connect VGA cable. 2. Press the button twice to turn off power of your projector before connection. 3, After connect, press the button to turn on unit and power indicator will light GREEN 4. Press the “G3” 7 SOURCE button to VGA mode and the video of VGA device will show on projector screen. 5. Press the (8) button twice to turn off unit power.
2 CONNECTING Follow below picture to connect audio cable and device. Press the @ button twice to tum off power of your projector before connection 2. Use audio cable to connect follow below figure. After connect and turn on both units. Your projector sound from textual device now. 4. After using , turn off both unit Station Amplifier Audio cable Follow below picture to install USB and micros D Card. Tum off the unit before install USB / micros D Card.
£ senice@Jlinicellfe com Install USB / Micro SD device: 1. Tum off the unit before install USB / micros D Card. 2. Install the USB device into USB port. 3. After connect, press the button to turn on unit and the power indicator light GREEN. 4. Press the “S$” / SOURCE button to enter and use @ buttons to search the MEDIA PLAYER mode. 5. After selection, use & buttons to search the MUSIC / PHOTO / MOVIE icon and press the < button to enter. If necessary, use the €4.
2 PROJECTOR SETTING 1. Click "Menu" of the projector remote control or "M” of the projector, enter the sifting menu. 2. "PICTURE" SOUND" OPTION" TIME" can be set manually. After you select the properties (PICTURE/SOUND/TIME/OPTION) you want fo set, please press the operation pans! {o select the setting range of the properties.
£ senice@Jlinicellfe com PROJECTOR SETTING Use & bunions to select manual page. This manual showed on right upper of screen. = Aap Jew Mann . Hae Ba ma . doe WB 1. Cloture Mode Select Vivid, User (custom), Soft or Standard 2. Contrast Brightness, etc Set Picture Mode to “User” to adjust these settings 3. Color Temperature Select Warm Cool, or Medium. 4. Aspect Ratio Select 16:9, 4:3 , or Auto 5. Noise Reduction Select Off, Low, Middle , High or Default 6. Screen Color temper...
2 PROJECTOR SETTING Use @& buttons to select manual page. This manual showed on right upper of screen. Alas 4B 1. Sound Mode Select Music, Movie, User (custom), Sports ,or Standard 2. Treble, Bass Set Sound Mods to “User” to adjust these settings 3. Balance Adjust the audio balance. 4. Surround Sound Turn Surround Sound ON or OFF.
2 PROJECTOR SETTING Use & buttons to select manual page. This manual showed on right upper of viewing screen. Lee Lima) oa 8 1. Clock Select clock to Day, Month, Year, Hour ,and Minutes. 2. Off Timer Select turn off timer to Day, Hour ,and Minutes. 3. On Timer Select turn on timer to Day, Hour ,and Minutes. 4. Sleep Timer Select sleep timer to Off, minim, minim, 30 min, minim, minim, 120min, 180min, 240min 5. Auto Sleep Select auto sleep function to Never, 4 hour, 6 hour, § hour.
2 serviceability TROUBLESHOOTING Before resorting the maintenance service, please kindly check by yourself with the following chart. No Image is Projected or a "No Signal” message is displayed 1st the power light not on, check the projector is plugged into the mains, that the socket is switched on, and then press the power button on the projector. 2.Check the lens cover has been removed. 3.Check the cables are securely attached and installed as per the User Manual. 4.