User Manual

GEOKER Camera Network Connection and Settings

1. Computer download and install "AjDevTools" software tool,

http://www.anjvision.com:8021/client/AjDevTools_V5.2.1_20210108.exe

Or you can use Hikvision “SADP” Tool

https://www.hikvision.com/en/search/?q=SADP

2.Please keep the computer and camera on the same LAN--Please use a network cable to connect,

do not use Wi-Fi.

3.After installation,open the software and click the Start Search,

① Search for the IP address of the camera;

② Query the IP address of the camera.

4. ① Query your computer IP address

② Open Network and Sharing Center

③ Details

④ View your computer's IPV4 Address, Subnet Mask and Gateway

PAGE 1
GEOKER Camera Network Connection and Settings 1. Computer download and install "AjDevTools" software tool, http://www.anjvision.com:8021/client/AjDevTools_V5.2.1_20210108.exe Or you can use Hikvision “SADP” Tool https://www.hikvision.com/en/search/?q=SADP 2.Please keep the computer and camera on the same LAN--Please use a network cable to connect, do not use Wi-Fi. 3.
PAGE 2
5. Modify the IP address of the camera and computer in the same network segment Setting method: ① Select the IP address of the camera; ② Click IP Batch Manual Setting IP address; ③ Modify the IP address of the camera to be in the same network segment as the IP address of the computer or choose DHCP to obtain an IP address automatically; ④ Select OK--Successfully modified. 6 . Double click the camera IP address or Enter the camera IP address, (ex.192.168.1.