Viking Installation Guide ® HOT Viking Range Corporation HOT REAR REAR FRONT FRONT 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) HOT or visit the Viking Web site at HOT HOT REAR REAR REAR FRONT FRONT FRONT vikingrange.
Table of Contents IMPORTANT– Please Read and Follow Warnings & Important Safety Instructions _______________________________________________3 Dimensions (30”W.) __________________________________________________________________5 Dimensions (36”W.
IMPORTANT– Please Read and Follow WARNING CAUTION BURN HAZARD Dimensions Electric 30” Induction Cooktop Be sure the electric power is off from the breaker box to the junction box until the cooktop is installed and ready to operate. The junction box should be connected to a suitable ground. The use of cabinets for storage above the appliance may result in potential burn hazard. Combustible items may ignite, metallic items may become hot and cause burns.
Specifications Cutout Dimensions Induction Cooktop Description VICU206 VICU266 Overall width 30-3/4” (78.1 cm) 36-3/4” (93.3 cm) ( 5-5/8” (14.3 cm) 4” (10.2 cm) 3-1/4” (8.3 cm) Overall depth from rear Maximum amp usage Surface element rating Right front Right rear Center front Center rear Left front Left rear Approximate shipping weight 34-5/8” (87.9 cm) minimum to 35-3/4” (90.8 cm) maximum 19-1/8” (48.6 cm) minimum to 20” (50.8 cm) maximum 240-208/120 VAC; 50/60Hz; factory-installed 4 ft.
Cutout Dimensions (VICU Cooktop over Single Electric Oven)* Clearance Dimensions ” 1 4 .5 (2 /2 to -1 5 2 6.3 cm to Interior Cabinet Clearances ” ) cm 1 48 ( ” /8 ) -3 cm 4 1 6.5 3 ” ( /8 ) -3 cm 4 1 6.5 (3 (91”min .4 . cm ) ” /8 ) -7 cm 36 6 2 3.3 (7 /8 ” m ) 9-1 .6 c 28 (71-1/8 .4 ” cm ) IMPORTANT: The electronic components for the induction elements in the cooktop need air circulation. To ensure long life of electronic components, it is required that 1-1/2 (3.
Cutout Dimensions Clearance Dimensions Proximity to Side Cabinet Installation 30” W. CUTOUT w/ DOWNDRAFT 7/8” (2.2 cm) 27” (68.6 cm) 7/8” (2.2 cm) 2-1/4” (5.7 cm) 20-1/4” (51.4 cm) 28-3/4” (73.0 cm) Minimum Clearances from Adjacent Combustible Construction • The cooktop may be installed directly to existing base cabinets. • The cooktop CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall appliances, or other side vertical surfaces above 36” (91.4 cm) high.
Electrical Requirements WARNING General Information WARNING ELECTRICAL GROUNDING INSTRUCTIONS The electrical power to the unit must be shut off while line connections are being made. Failure to do so could result in serious injury or death. This cooktop must be electrically grounded in accordance with local codes or, in the absence of codes, with the National Electrical Code, ANSI/NFPA 70latest edition. FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
Final Preparation • Some stainless steel parts may have a plastic protective wrap which must be peeled off. • All stainless steel body parts should be wiped with hot, soapy water and with a liquid cleaner designed for this material. If buildup occurs, DO NOT use steel wool, abrasive cloths, cleaners, or powders! Service & Registration • If it is necessary to scrape stainless steel to remove encrusted materials, soak with hot, wet cloths to loosen the material, then use a wood or nylon scraper.