Installation Guide

10
Installation
• BE SURE that support for this appliance
is perpendicular to the front facing of the
wall or cabinet before you perform the
installation.
• It is recommended to use standard 2 x
4 support posts with a minimum of 3/4"
(1.9 cm) solid base to support the oven.
Support posts should be level with the fl oor
line and well-secured to the base of the
cabinet. Base cabinet support must be able
to support the oven's weight - 410 lbs. (186
kg).
• Use of a hydraulic lift is recommended for
the installation of double oven units.
• All openings in the wall behind the appliance
or in the fl oor under the appliance should be
sealed.
• Keep appliance area clear and free from
combustible materials, gasoline and other
fl ammable vapors.
• WARNING: DO NOT USE AN EXTENSION
CORD WITH THIS APPLIANCE. SUCH USE
MAY RESULT IN FIRE, ELECTRICAL SHOCK
OR OTHER PERSONAL INJURY.
Remove wooden brace on front of pallet.
Remove the outer
corrugated cover and all
inner packing.
1
Cabinet Skid Plate and Side Rails
Attach the skid plate before installing the
two slide rails. If possible, the rails should
be placed on top of any studs that might be
located under the cabinet interior fl oor.
1. Remove adhesive backing from skid plate.
Center across the inside front of the
cabinet opening with fl ange and screw
locations on front outer edge. Screw into
place with enclosed screws.
2. Remove adhesive backing from one of the
slide rails.
3. Place the slide rail left of the center line
on the cabinet fl oor (adhesive side down)
fl ush with the outer edges of the skid
plate. Press the slide rail down fi rmly
against the cabinet fl oor.
4. Repeat step 3 for the second slide rail.
Two 21" (53.3 cm) slide rails and one 28"
(71.1 cm) skid plate have been included to
help install the oven into your cabinet more
easily by providing a fl at smooth surface on
which to slide the oven into place. The skid
plate and slide rails are fl at metal strips with
adhesive tape strips on one side.
adhesive
strips
Cabinet Floor Center Line
Skid plate