VZ-ENB & EHB SERIES 49" and 55" PROFESSIONAL LED CCTV VIDEO WALL MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
CONTENTS Safety Instruction ....................................................................................................................................................................................... 3 1. Mark Indication & Substance ....................................................................................................................................................... 4 2. Warning & Caution ........................................................................................
SAFETY INSTRUCTIONS Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read all warnings. Follow all instructions to ensure longevity of monitor. Do not place the monitor near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other heat generating devices.
SAFETY INSTRUCTIONS Important Safety Instructions Mark Indication and Substance CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of uninsulated & dangerous voltage within the monitor’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY INSTRUCTIONS Important Safety Instructions Caution • • • • • • • • • • • • • If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. Make sure to unplug the power cord before cleaning the monitor. Make sure to leave a gap between monitor and wall. Do not drop the monitor when moving it. Place your monitor in a location with low humidity and minimal dust.
FCC RF INTERFERENCE STATEMENT Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RoHS COMPLIANCE Note Name and contents of toxic and hazardous substances or elements contained in the product.
INSTALLATION Installation Tools The following tools may be required or recommended. Stud Finder & Pencil Protective Eye-wear Level Ladder Phillips & Flathead Screwdriver Automatic Screwdriver Phillips & Flathead Screwdriver Bit Assembly Components - provided Your ViewZ monitor is shipped with all proper installation hardware and components. If there are parts missing and/or damaged, please stop the installation and contact ViewZ USA at (888)-998-4399.
FEATURES Features • • • • • • • Creates a seamless display effect in multi-screen splicing. Supports m rows and n columns (1 ≤ m ≤ 10, 1 ≤ n ≤ 10) in splicing and 10 x10 at most.
CONNECT EXTERNAL EQUIPMENTS Interface Input Ports The following image is the description of interface input ports d q w 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 10 e r t y ui o f g a s AC IN ON / OFF SWITCH RS232 IN / OUT USB IN #1 & #2 HDMI IN DVI IN VGA (15 Pin D-Sub) IN PC AUDIO IN AV(composite) 1-4 IN AV(composite) OUT AV AUDIO R/L OUT Component (YPbPr - BNC) IN S-VIDEO (Y/C - BNC) IN AV AUDIO R/L IN Visit the ViewZ USA website at https://www.viewzusa.
REMOTE FUNCTION Remote Controller 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
RS-232 COMMANDS POWER On/Off RS 232 Communication Command & Relevant Configurations In consideration of secondary development of centralized control circumstances, the POWER ON/OFF function of RS232 communication command & relevant configuration setup are described as follow: • • RS 232 communication settings Pinout : TXD: #2, RXD: #3, GND: #9 Baud rate : 9600 bps Parity check bit : none Data bit : 8 bit | Stop bit : 8 bit POWER ON/OFF RS232 communication command POWER ON - RS232 command: 69 D0 C6 POWER O
CONTROL AND FUNCTION Select Input Source Press 'SOURCE' button on monitor or on remote controller. Press ▲ / ▼ button to change input source and then press OK button to select input source on monitor. Press ▲ / ▼ button to change input source and then press MENU button to select input source on remote controller. If you connect any input source, monitor will display current input source resolution and frequency.
CONTROL AND FUNCTION Picture FUNCTION VALUE BRIGHTNESS Adjust the brightness 0 ~ 100 CONTRAST Adjust the contrast 0 ~ 100 Adjust the hue 0 ~ 100 Adjust the color saturation 0 ~ 100 SHARPNESS 2) Adjust the color sharpness 0 ~ 100 COLOR TEMP. Adjust the color setting See table below ASPECT RATIO Adjust the video format See table below PICTURE MODE Adjust the image color setting See table below HUE 1) 2) SATURATION ▲/▼ MOVE ◄/► SELECT(ADJUST) MENU RETURN 2) NOISE REDUCT.
CONTROL AND FUNCTION Sound Sound Mode Treble Bass Balance Standard 50 50 0 ▲/▼ MOVE ◄/► SELECT(ADJUST) MENU RETURN FUNCTION VALUE SOUND MODE Select one of the presets TREBLE Adjust the treble level 0 ~ 100 BASS Adjust the bass level 0 ~ 100 BALANCE Adjust the balance between left & right channel -50 ~ 50 User Manual USER / MUSIC / MOVIE / STANDARD Visit the ViewZ USA website at https://www.viewzusa.
CONTROL AND FUNCTION Setup - OSD English ▲/▼ MOVE ◄/► SELECT(ADJUST) MENU RETURN FUNCTION OSD LANGUAGE Set the language of the OSD menu OSD DISPLAY TIME Set the OSD display time OSD TRANSPARENCY Set the OSD MENU transparency BLUE SCREEN Set the blue display whether or not detect signal input SLEEP TIME Set the timer for auto standby VALUE English, Chinese 15, 30, 45 & 60 sec 0 ~ 100 ON / OFF OFF, 15, 30, 45, 60, 90, 120 or 240 min.
CONTROL AND FUNCTION Advance ▲/▼ MOVE ◄/► SELECT(ADJUST) MENU RETURN FUNCTION VALUE H-POSITION 1) Adjust the horizontal picture position 1 ~ 100 V-POSITION Adjust the vertical picture position 1 ~ 100 FREQUENCY 1) Adjust the number of horizontal picture elements 1 ~ 100 PHASE Adjust the vertical noise of screen image 1 ~ 100 1) 1) AUTO ADJUST Adjust the screen automatically Press ► button on remote controller to set auto adjust for screen 1) Only available in VGA input User Manual Vis
USB MEDIA PLAYER Specification On remote controller, use PLAY / PAUSE / STOP / ROTATE / PREV. / NEXT / REV. /FWD buttons to operate USB media player. Support 18 Video Codec WMA/WMV, AAC, AC3, DIVX, MPEG, H264, VC1, AVS, FLV, RM/RMVB Video Format MPEG, AVI, MOV, MP4, MKV, RM, RMVB Image Format JPEG, PNG, BMP Music Format mp3, mp4, wma Text Format TXT (raw text file only) Capacity Max 16GB Visit the ViewZ USA website at https://www.viewzusa.
MOUNTING GUIDE Wall Mounting (Optional) VZ-NB / UNB monitors are suitable for universal wall mount (not included). Minimum 4 * M6 x L12 screws for VZ-49ENB / 55ENB VZ-49EHB / 55EHB 1. VZ-49ENB & VZ-49EHB : Universal WALL MOUNT 600 x 400 mm 2. VZ-55ENB & VZ-55EHB : Universal WALL MOUNT 600 x ( 94 + 200 + 94) mm WARNING ! If user uses screws bigger and longer than M6 x L12 mm for VZ-49ENB, VZ-55ENB, VZ-49EHB & VZ-55EHB it may cause damage to the unit.
SPECIFICATION Model No. VZ-49ENB VZ-55ENB Size & Type 49" 55" Panel Type 49'' LED Backlit Monitor 55'' LED Backlit Monitor Pixel Pitch (mm) 0.630 (H) x 0.630 (V) mm 0.630 (H) x 0.630 (V) mm Brightness LCD Contrast Ratio 500 cd/m² 1300 : 1 1400 : 1 Viewing Angle 178° / 178° Display Color 1.07 Billion Colors (10 Bit) Response Time 8 ms (Gray to Gray) Bezel width (T / B / L / R) 0.07” / 1.8 mm 0.07” / 1.8 mm Active to Active Bezel 0.14” / 3.6 mm 0.14” / 3.
SPECIFICATION Model No. VZ-49EHB VZ-55EHB Size & Type 49" 55" Panel Type 49'' LED Backlit Monitor 55'' LED Backlit Monitor Pixel Pitch (mm) 0.630 (H) x 0.630 (V) mm 0.630 (H) x 0.630 (V) mm Brightness LCD Contrast Ratio 700 cd/m² 1300 : 1 1400 : 1 Viewing Angle 178° / 178° Display Color 1.07 Billion Colors (10 Bit) Response Time 8 ms (Gray to Gray) Bezel width (T / B / L / R) 0.07” / 1.8 mm 0.07” / 1.8 mm Active to Active Bezel 0.14” / 3.6 mm 0.14” / 3.
TROUBLESHOOTING GUIDE - Check the following before calling for service. - If the same problems continue after checking, contact the reseller you purchased the monitor from.
TERMS OF WARRANTY / RMA - The warranty period for this monitor is 3 years. The warranty will be voided for the scenarios listed below. - You can also download the manual and information of VIEWZ web site: VIEWZUSA.
NOTE 24 Visit the ViewZ USA website at https://www.viewzusa.
WARRANTY ViewZ USA LIMITED 3 YEAR WARRANTY What and Who is Covered by this Limited Warranty and for How Long ViewZ USA warrants this product to be free from defects in material and workmanship for 3 years to the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What ViewZ USA Will Do At their sole discretion, ViewZ USA will repair or replace any product or product part that is defective.