ViewSonic ® N4261w LCD TV - User Guide - Guide de l’utilisateur - Guía del usuario Model No.
Compliance Information .................................................................................. 1 Important Safety Instructions .......................................................................... 3 Declaration of RoHS Compliance ................................................................... 4 Copyright Information ...................................................................................... 5 Product Registration ................................................................
FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
ENGLISH Compliance Information User Information for North America Notice :Use the cables which are included with the unit or specified TM HIGH-DEFINITION MULTIMEDIA INTERFACE HDMI,the HDMI logo and High-Definition Multimedia Interface are registered trademarks of HDMI Licensing LLC. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs,Inc. the Pixelworks DNK Technology TM LOGO is a trademark of Pixelworks,Inc.
Important Safety Instructions Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7.
ENGLISH Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.
Copyright Information ® ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
ENGLISH Antenna Installation Instructions 1.
Congratulations on your purchasing of a ViewSonic LCD TV display. Important! Save the original box and all packaging material for future shipping needs.
ENGLISH Front View of the Product 1 2 3 4 5 ViewSonic 6 8 7 8 � CH �/� Change the channel. � VOL �/� Used for changing the volume. � MENU Display menu screen. � SOURCE Switch between display input sources. � POWER Turn the TV ON (green light) and OFF (red light). � EARPHONE Used for connecting headphones to the TV. � POWER INDICATOR LED Indicate if the power is turned on (green),or if the TV is in stand-by mode (red).
Rear View of the Product ENGLISH 1 2 3 4 12 5 PC IN 6 7 ANT IN RS232 IN 8 9 CABLE IN HDMI 1 IN 10 HDMI 2 IN 11 � DIGITAL OUT Connect to audio device which with RCA jack by coaxial or optical audio cable .Sound track will be 5.1 channel in DTV system when channel support and in analog TV system, sound track will be stereo output. � AUDIO OUT Connect to the A/V device audio input . ➌ S/AV IN Connect to the audio and S-Video or video output jack of your A/V device.
Remote Control ENGLISH 24 23 1 SOURCES POWER 22 TV DVD STB VCR 21 20 VPB WMA AUD AUX TV AV 19 18 COMPONENT HDMI/PC SOURCES 1 2 3 4 5 6 7 8 9 RECALL 0 -/100 4 5 6 GUIDE WIDE 7 8 ENTER 17 2 3 SLEEP MENU 9 10 CC 16 15 11 MUTE VOL CH/PG 12 14 DISPLAY MTS/SAP 13 ViewSonic 1 2 3 4 5 6 POWER Turn power on or off. COMPONENT Switch the source to HD1/HD2 mode . HDMI/PC Switch the source to HDMI/PC mode. NUMBER KEYS Press the number keys to enter channel numbers.
8 9 10 11 ARROW KEYS Press the keys to scroll through the OSD menu options. ENTER Press this button to execute the order you choose. MENU Display the OSD menu.Press repeatedly to view the different menu pages or exit the OSD menu. CC Press to call the Closed Caption (CC) list. CH�� Increase� or decrease� the channel number. 12 (These functions available on other devices). 13 DISPLAY Press repeatedly to display channel number or name of input source.
ENGLISH 21 AV Switches the source to AV mode. 22 (These functions available on other devices) *If remote control unit does not operate,you may try press TV key to reset the setting of remote control. 23 SOURCES Selects the TV, AV/S, HDTV, PC/HDMI inputs as the video source signal. 24 REMOTE INDICATOR LIGHT When using remote control,the indicator light will be in red. Notes on the Remote Control • The remote control’s effective range is 5 meters from the LCD screen at an angle of up to ±30°.
The “default” out of box setting enables the Remote to control a predetermine TV, DVD, STB, VCR, WBA and AUD. Depending on Device desire the following model will be active: Device TV DVD STB VCR VPB WMA AUO Default Setting ViewSonic Samsung RCA Sony Viewsonic Viewsonic WMA-100 Sony Note :Multiple pre-progeammed codes are available for some devices; if default setting does not funtion, see pre-programmed table for additional codes.
ENGLISH Basic Setup 1.Power on the A/V component you wish to setup, so that you can test codes by sending power off commands. 2.Refer to the Pre-programmed code tables and write down the code number listed. 3.Press and hold the button for the desire device for approximately six seconds. The top LED will turn on, enter pre-prammed code.LED will blink to indicate preprogrammed code was captured code was captured correctly.
The AUX key is used to operate a second TV, DVD, STB, VCR, VPB, WMA and AUD. A fourth digital is necessary to identify the type of device the key will control. TV=1 DVD=2 STB=3 VCR=4 VPB=5 WMA=6 AUD=7 AUX Buttons ENGLISH AUX Key Setup For example, to control a SONY DVD player with a code of 027 undet the AUXkey a 2 must be added in the beginning of the pre-programmed code making it 2027.
ENGLISH Preprogrammed Code Table ViewSonicDV LCD TV’s and 1 Plasmas BRAND Aiwa Aiba Apex Audiovox Blaupunkt Bose Broksonic Bush Clarion Classic CyberHome Daewoo Dansai Denon Emerson Fisher Funai GE Go Video Goodmans GPX Vi BRAND N1700W N1300 N1500 N1750W N2010 N2010-E N2700W N2750W N3020W N3200W N3200W-E VPW4255 VPW5500 N2000 N3000W ViewSonic DVD DV Players-2 2 Grundig Harman Kardon Hitachi Irradio JVC CODE 001, 033, 051, 118 002, 037 046, 059, 060, 062, 063, 084, 085, 086 119 104, 123 113, 117 052 003
BRAND Akai Alba Allsat Alphastar Amstrad Ankaro Anttron Apollo Armastrong Asat Astra Astro AudioTon Best Blaupunkt Brain Wave BSkyB Bush Chaparral CityCom Clatronic Condor Crown Daeryung Dish Network DNT Drake Echostar Einhell Elta Emme Esse Ep Sat Eurosat Eurosky Eurostar Express Vu Ferguson Finlandia Finlux Fuba Fujitsu Galaxis GE General Instruments GMI Goodmans Granada ViewSonic Hanseatic Hirschmann Hisawa Hitachi Hughes Huth Intertronic Janeil Johansson JVC Kathrein KR Kreiselmeyer Kyostar Lasat Lenc
ENGLISH Quelle Radio Shack Radiola Radix RCA Realisitic RFT Saba Sabre Sagem Salora Samsung Satcom SatPartner Schneider Seemann SEG Siemens Skymaster Sony Star Trak Strong STS Sunstar Tandberg Tandy Tantec TechniSat Teco Telasat Telefunken Teleka Telemaster Telesat Televes Thomson Thorn Tonna Toshiba Triax Uniden Unisat Unitor Universum Visiosat Vortec Wewa Womersat Wisi Zehnder Zenith ViewSonic Cable Cable 015 048, 049 019 014 000, 040, 041 044 019 008, 017 006 025 013 005, 035, 057 016, 018 005, 007,
BRAND Action Admiral Aiko Aiwa Audiovox Bell & Howell Broksonic Calix Canon Capehart Carver CCE Citizen Colortyme Craig Curtis Mathes Daewoo Daytron Denon Dimensia Electrohome Emerson Fisher Fuji Funai Gerrard GE Go Video Goldstar Gradiente Harman Kardon Harwood Hitachi JBL ViewSonic JC Penney CODE 102 101, 144, 145 127 005, 126 122 119 059, 105, 120 122 124, 125 083, 138 131, 151 127, 130 095, 121, 122, 123, 127 096, 117 085, 090, 104,121, 122, 130 077, 079, 114, 117 121, 124, 125, 150 006, 007, 083, 10
ENGLISH 077, 088, 128, 129, 136, 141 Philips 022, 023, 024, 025, 026, 027, 076, 110, 111, 124, 131, 133, 151 Pioneer 078, 103, 118, 128, 142, 146 Portland 083, 138 Precision 102 Proscan 114, 150 Proton 085 Quasar 090, 124, 125 Radio Shack 090, 122, 133, 145 Radio Shack/Realistic 119, 121, 122, 124, 125, 126, 133, 144 Radix 122 RCA 048, 051, 078, 079, 088, 114,115, 121, 124, 128, 129, 136, 141, 148, 149, 150 Realistic 079, 090, 094, 097, 104, 119, 121, 122, 123, 124, 125, 126, 133, 144, 145 Ricoh 143, 147 R
Thomson Toshiba Uher Yamaha Zenith BRAND Aiwa Akai Bose Carver Curtis Mathes Denon Fisher GE Goodmans Gradiente Harman Kardon Hitachi JBL Jensen Jerrold JVC Kenwood Luxman Marantz Mclntosh NAD Nakamichi NEC Nikko Onkyo Optimus Panasonic CODE 024, 041, 063 013 039 075 065 001, 053, 054, 059, 076 005, 066, 068, 073 030 013 086 002, 025, 052, 070 003, 083 025 085 026, 028 004, 050, 057 005, 055, 058, 072, 080 088 042 082 064 078 064 087 006, 044, 048, 079 065, 071 032, 033, 051, 056, 062, 074, 091 Philips 00
ENGLISH Remote Control Battery Installation Follow the steps below to insert the batteries. 1 Open the remote control’s rear battery compartment cover. 2 Insert two AAA batteries. Ensure that the positive and negative ends match as indicated on the bottom of the battery compartment. 3 Replace the battery compartment cover. 1 2 3 CAUTION Only use the specified AAA batteries. Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury.
Cable Connections ENGLISH Attach video and audio cables according to the connections on your external devices such as DVD player, VCR and Stereo systems. R L Video IN Cr Cb Audio OUT Y L R Video OUT Cr Cb Y R AV OUT L VIDEO S-VIDEO S-VIDEO Power Cable Connection 1 Connect the power cable to a wall socket. 2 Connect the other end to the socket on the back of the LCD. Wall outlet AC IN Power card (Suppiled) Turning the TV (Power) On 1 Press the power button.
ENGLISH OSD Functions All the functions for the LCD TV are controlled either by the remote control or the control buttons on the front control panel at right of the TV. See “Front View of the Product” on page6. Press the MENU button on the remote control or the front control panel to display the OSD main menu. Picture Img.
Img.adj Picture Setup Source ENGLISH Picture Adjustment Audio Brightness 050 Contrast Sharpness Color Tint Video mode Color Temp 070 005 050 050 USER NATURE Back light Menu:Exit 050 Next Function Name Select Explanation Brightness Adjust the levels of light on your screen.It should be used in conjunction with the Contrast option. Contrast Adjust the light levels on your display.It should be used in conjunction with the Brightness option.
ENGLISH Image Adjustment Picture Img.adj Source Setup Audio fill all Image size Format window format single off Freeze frame on PIP Adjustments PIP / POP Swap Enter to swap Adjust Menu:Exit Function Name Image Size Format Freeze Frame H Position V position Auto ViewSonic Select Explanation Adjust the image size include:Fill All , 1 to 1 , normal, wide,zoom, anamorghic, subtitle. In PC mode image size includes : Fill Al l, 1 to 1 , Fill Aspect.
Picture Img.adj Setup Source ENGLISH Image Adjustment Audio fill all Image size Format window format single off Freeze frame on PIP Adjustments PIP Size 050 PIP Position Alpha Blend 050 050 PIP / POP Swap Menu:Exit Enter to swap Adjust Function Name PIP Adjustments PIP Size PIP Position Alpha Blend PIP/POP Swap Select Explanation Adjust the size of sub-picture in 3 modes. Adjust the position of sub-picture :up, down, right, left. Adjust the transparency of sub-picture.
ENGLISH Source Adjustment Img.adj Picture Source Setup Audio Input source Main Window source: AIR View Firmware Vision Menu:Exit V2.02(L2) Adjust Function Name Select Explanation Input Source Select the source : Air, AV 1, AV 2, HD 1, HD 2,PC, HDMI 1,HDMI 2. View Firmware Version For manufacturer use.
Img.adj Picture Setup Source Osd Language Audio ENGLISH Closed Caption Setup Picture Img.
ENGLISH Setup Adjustment Picture Img.adj Setup Source Osd Language Audio ENGLISH Closed Caption Setup 050 Sleep Timer Osd Setting Transparency 041 Osd Timeout(sec) 020 Enter To Reset Factory Reset Adjust Menu:Exit Function Name Sleep Timer Select Explanation Enable you to set off timer to 10 through 240 min.That will elapse before the TV turns off. OSD Setting Transparency OSD Timout Adjust the transparentcy rate OSD background. Adjust the stay time that OSD picture stay on screen.
Img.adj Picture Setup Source Osd Language ENGLISH Setup Adjustment Audio ENGLISH Closed Caption Setup 050 Sleep Timer Osd Setting Clock Setting Set Time Zone Hawaiian Observe Daylight Zone Adjust Function Name Clock Setting Setting Time Zone Observe Daylight Zone ViewSonic yes Enter To Reset Factory Reset Menu:Exit no Select Explanation Setting the American time zone : Eastern, Central, Mountain, Pacific, Alaska, Hawaii(Hawaii-Aleutian) Setting the Daylight saving time : NO or YES.
ENGLISH Audio Adjustment Img.adj Picture Setup Source Audio Volum 017 Treble 050 Bass 050 Balance 050 User Audio mode Speaker Mute off Analog audio SRS mode Menu:Exit on Mono Trusurround XT Next Function Name Select Explanation Volume Treble Bass Balance Audio Mode Adjust the overall volume of the speakers. Adjust the high frequency content in the audio output. Adjust the low frequency content in the audio ouput. Balance the volume of the left and right speakers.
Tuner Adjustment Setup Source Audio ENGLISH Img.adj • TV mode only Tuner TV Tuner Setting Enter To Scan Cannel Auto Search TV Mode Air Channel Setting Edit Channels Adjust Menu:Exit Img.adj Source Setup Edit Channels Audio 13 Function Name TV Tuner Setting Auto Search TV Mode Channel Setting ViewSonic Select Tuner Add Delete Explanation Auto scan and record the ANT or cable channels Select the tuner source : AIR, cable You can add or delete the channel in your channel list.
ENGLISH V-chip Adjustment Source Setup V-chip Tuner Audio Password Set Password - - - - - - OK Change Password - - - - - - OK enter to clear Clear Password Film Blocking TV Blocking Adjust Menu:Exit Source Setup Audio Tuner Select V-chip Password Film Blocking TV Blocking Adjust Menu:Exit Function Name Password ViewSonic Select Explanation Access to parental control feature, you have to enter password. Factory default passwod is “000000”.
Explanation TV Guideline TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA ViewSonic Explanation ALL Children(This program is appropriate for all children) Directed at older children(This program is designed for children aged 7 and above.Note: For those programs where fantasy violence may be more intense or more combative than other programs in this category, such programs will be designated TV-Y7-FV.). General Audience.(this program is suitable for all ages) Parental Guidance Suggested.
Appendix Specifications Panel Type 42” (full 41.
Dimensions Weight Temperature -20°C to 60°C (-4°F to 140°F) Humidity 10% to 90% (no condensation) Altitude To 12,000 meters Physical 42” : 1070 mm (W) x 815 mm (H) x 300 mm (D) 42.2” (W) x 32.1” (H) x11.9 “(D) Package 42” : 1190 mm (W) x 970 mm (H) x 420 mm (D) 46.9” (W) x 38.2” (H) x 16.6 “(D) Net 42” : 38 kg (83.8 lb.) Gross 42” : 45 kg (99.2 lb.) Regulations Power saving modes ENGLISH Storage conditions FCC-B,c-UL,CB,NOM Active Off <1.
Troubleshooting ENGLISH No power Make sure the LCD is properly connected. (see also pages 12) Make sure the AC power cord is properly connected. (see also page 12) Make sure the AC power is ON, DC power button is ON (Green LED). Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Poor or no picture The TV station may be experiencing problems. Try another channel. The Cable TV signal may be scrambled or encoded.
Customer Support ENGLISH For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Web Site Telephone United States www.viewsonic.com/support/ (800) 688 6688 Canada www.viewsonic.
Limited Warranty ® ENGLISH VIEWSONIC LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
