PJ-PEN-003 IR Interactive Module User Guide Model No.
Copyright Information Copyright © ViewSonic® Corporation, 2013. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.
Product Registration To fulfill possible future product needs, and to receive additional product information as it becomes available, please visit your region section on ViewSonic's website to register your product online. The ViewSonic CD also provides an opportunity for you to print the product registration form. Upon completion, please mail or fax to a respective ViewSonic office. To find your registration form, use the directory ":\CD\ Registration".
Table of contents Optical touch control projector packing list.................................................. 1 Accessories................................................................................................. 2 Install in Windows OS................................................................................. 3 Install in Mac OS....................................................................................... 22 Install in Linux OS......................................................
Optical touch control projector packing list Accessory check list Please check this list against accessories included with your optical touch control projector. Please call the dealer where you purchased the product for any missing item. 1. Light pen 2. IR Interactive Module 3. USB Cable 4.
Accessories Keys and buttons for the light pen Touch control pen tip Before using the light pen Make sure it is powered on. How to use (your light pen)? Press the touch control pen tip to the screen, signals transmitted from the tip to validate locations with sensors in projector.The touch control pen tip lights up when sending signals. 1) P lace the pen tip anywhere on the screen. 2) Press the pen tip to the screen to activate.You may draw lines in paint brush mode.
Install in Windows OS The LightPen software features an optical touch control function 1. System requirements For normal optical touch control operation, please make sure the following system requirements are met. Install the LightPen software System requirements Operating Microsoft Windows XP(SP2)(32bit)/ system Vista(32bit)/Windows 7 (32bit/64bit) CPU Intel® Core™2 Duo 2.
Install in Windows OS 2. Software installation 2.1 Driver installation A CD drive is created by connecting the interaction module to a computer through a USB cable (see Figure 1). Enter the windows\ Setup.exe folder of the CD drive to install SPDriver. You may execute the launcher.exe program to start the SPDriver directly. Figure 1 Figure 2 Step 1: I nsert the Owner's Manual CD into your CD drive.
Install in Windows OS - SPDriver Step 4: (1) C lick SPDriver and a pop-up window as shown below will display.Click Next to continue. (2) Select the destination folder for installation (a default folder is provided). Click Next to continue. (3) Please wait until the installation process is completed successfully.
Install in Windows OS - ViewDrawII 2.2 Install the ViewDrawII software Step 1: I nsert the Owner's Manual CD into your CD drive. Step 2: E nter the "LightPen Software for Windows" folder found on your CD. Step 3: Double click the Setup.exe file name and a pop-up window as shown below will display. Step 4: (1) Click ViewDrawII and a pop-up window as shown below will display.Click Next to continue.
Install in Windows OS - ViewDrawII (2) Select the destination folder for installation (a default folder is provided). Click Next to continue. (3) Click Install after validating the installation data, continue the installation process. (4) Please wait until the installation process is completed successfully.
Install in Windows OS - ViewDrawII 3. Initialize the optical touch control function 3.1 Once the SPDriver is installed, run it by steps Start/All Programs/ LightPen/SPDriver/SPDriver, then connect your projector and a PC with a USB cable. Your system may look like the Figure shown below. (Windows 7/VISTA) (Win XP) 3.2 C lick the icon and the menu as shown below will display. (VISTA/Win XP) * The default Mouse Mode is available for Win XP and Win Vista only.
Install in Windows OS - ViewDrawII (Windows 7) * The Microsoft Windows 7 OS support multi-point touch control. When using your projector with a PC running Microsoft Windows 7 OS, you may select to use the default Mouse mode or the Multi-point Touch Control mode. * Select "About" to show the software version information. 3.3 (1) Select Calibration to execute the calibration procedure The system saves calibration data after the four calibration points are touched.
Install in Windows OS - ViewDrawII (2) Auto calibration You may select Auto Calibration to calibrate your product as prompted by the screens shown in Figure 3. DO NOT block images shown in the calibration screen while auto calibration is running. Figure 3 Figure 4 3.4 C alibration completed successfully. 3.5 Auto calibrating failed Figure 5 If the "auto calibrating failed" message prompts as shown in Figure 5, please take the steps below for troubleshooting, then do auto calibration again. 1.
Install in Windows OS - ViewDrawII 3.6 How to execute the driver again You may execute the driver again by running the steps "Start/All Programs/LightPen/SPDriver". 4. Toolbar 4.1 ViewDrawII software toolbar After the ViewDrawII program is installed and "Start/All Programs/LightPen/ViewDrawII" executed, a toolbar will display on the right hand side of your screen (see figure). * Press LightPen icon and select "About" to show the software version information.
Toolbar - ViewDrawII 4.2 Main functions Icons Names Descriptions Mouse Mouse functions. Red brush pen Red brush pen. Green brush pen Green brush pen. Blue brush pen Blue brush pen. Mark pen Translucent brush pen. Drawing tools To draw circles, rectangles, isosceles triangles, and lines. Width and color of brush pen Select width and color of brush pen. Eraser Erase strokes made by brush pen. Clear all Erase all strokes made by brush pen. Save contents and hand drawings of current page.
Install in Windows OS - ViewDrawII 4.3 Sub-functions (1) Drawing tools Click and a popup sub-menu from the main menu is shown as below. Click to select the desired drawing tool for hand drawing. (2) Dual pen tools Click and a popup sub-menu from the main menu is shown as below. Click to select the desired drawing mode for hand drawing. Icons Descriptions Both parties make drawings with the same tool in full screen mode.
Install in Windows OS - ViewDrawII (2.1) Full Screen Dual Pens Both parties make drawings with the same tool in full screen mode. Divided Screen Dual Pen Both parties make drawings with the same or different tools in equally divided screen mode.
Install in Windows OS - ViewDrawII (2.2) Toolbar Icons Names Red brush pen Descriptions Red brush pen. Green brush pen Green brush pen. Blue brush pen Blue brush pen. White brush pen White brush pen. Thin circular stroke Thin brush pen. Thick circular stroke Thick brush pen. Square stroke Rectangle brush pen. Eraser Erase strokes made by brush pen. *O nly one eraser is available in full screen dual pen at the same time. Clear all Erase all strokes made by brush pen.
Install in Windows OS - ViewDrawII (3) Whiteboard mode , the screen will change to whiteboard background Click the two functions on the tool bar would change to and Import Background and i. Click Import Whiteboard. and the selection window will display for you to import desired pictures as background. See figure below.  ii Click Click to restore the background to whiteboard mode. again to exit the whiteboard mode.
Install in Windows OS - ViewDrawII (4) Editing tools Click and a popup sub-menu from the main menu is shown as below. Click to select the desired edit function. Icons Descriptions Print current screen. Undo last action. Cancel undoing last action. Simulate spotlight effects. Simulate curtain effects. Switch toolbar from vertical to horizontal orientation. Toggle switch location of toolbar at left or right side of the screen. 4.
Install in Windows OS - ViewDrawII 4.5 Change toolbar direction Point the light pen at any place under the projection image and press the pen tip to switch vertical toolbar into horizontal one. Point the light pen to the left or right of the projection image and press the pen tip to switch horizontal toolbar into vertical one.
Install in Windows OS - ViewDrawII 4.6 Change toolbar position Point the light pen to the left or right away from the screen and press the pen tip to change toolbar location for vertical toolbar. Press again to display or hide the toolbar. Point the light pen to the bottom away from the screen and press the pen tip to display or hide the toolbar for horizontal toolbar. 4.
Install in Windows OS - ViewDrawII 5. PowerPoint toolbar ViewDrawII features PowerPoint toolbar supporting Microsoft Office 2003 or later versions. The PowerPoint toolbar will display at the right hand side of your screen if you open the PowerPoint Tool Setup from the toolbar and display the PowerPoint file in PowerPoint's Playback mode.  The PowerPoint toolbar closed automatically after exiting Playback mode.
Install in Windows OS - ViewDrawII 5.1 Function of PowerPoint toolbar Icons Descriptions Change size of toolbar Change position of PowerPoint toolbar Switch to mouse mode Switch to the right key of your mouse Switch to red brush pen Erase Erase all Back to previous page Go to next page.
Install in Mac OS The ViewDrawII software features an optical touch control function 1. System requirements For normal optical touch control operation, please make sure the following system requirements are met. Install your ViewDrawII software System requirements Operating Mac OS X v10.5 or above system CPU Intel processor Memory 2GB or more Minimum hard 100 MB disk space 2. Software installation 2.1 Driver installation *C onnect your projector to a computer to act as a disk drive.
Install in Mac OS - ViewDrawII 3. Initialize the optical touch control function 3.1 Connect your projector and a PC with a USB cable.Your system may look like the Figure shown below. 3.2 C lick the icon and the menu as shown below will display. * Select "About..." to show the software version information. 3.3 S elect "Calibration" to execute the calibration procedure. 3.4 The system saves calibration data after touching the four calibration points.
Install in Mac OS - ViewDrawII 4. Toolbar 4.1 ViewDrawII toolbar After the ViewDrawII program is installed and executed, a toolbar displays on the right hand side of your screen. * Select "About ViewDrawII" to show the software version information.
Install in Mac OS - ViewDrawII 4.2 Main functions Icons Names Descriptions Mouse Mouse functions. Red brush pen Red brush pen. Green brush pen Green brush pen. Blue brush pen Blue brush pen. Mark pen Translucent brush pen. Drawing tools To draw circles, rectangles, isosceles triangles, and lines. Width and color of brush pen Select width and color of brush pen. Eraser Erase strokes made by brush pen. Clear all Erase all strokes made by brush pen.
Install in Mac OS - ViewDrawII 4.3 Sub-functions (1) Drawing tools Click the main menu and a popup sub-menu from the main menu is shown as below. Click to select the desired drawing tool for hand drawing. (2) Whiteboard mode , the main menu will change to white background with Click the two functions of Import Background and Import Whiteboard. i. Click and the selection window will display for you to import desired pictures as background. See figure below.
Install in Mac OS - ViewDrawII ii Click Click (3) to restore the background to whiteboard mode. again to exit the whiteboard mode. Editing tools Click and a popup sub-menu from the main menu is shown as below. Click to select the desired edit function. Icons Descriptions Select what you have drawn as an object to enlarge, decrease, rotate, delete or move it. Print current screen. Undo last action. Cancel undoing last action.
Install in Mac OS - ViewDrawII 4.4 Switch the mouse or brush pen mode You can switch between mouse or brush pen modes by pointing the pen tip above or below the projected image and pressing the pen tip. when switching to mouse mode; Icons in toolbar change to change to when switching to brush pen mode. The items in yellow box will display as thumbnails in the toolbar for easy identification of current mode.
Install in Mac OS - ViewDrawII 4.5 Change toolbar position There is a quick method to change position visibility of the toolbar. Press the light pen tip at the left or right side beyond the screen, then you can change position visibility of the toolbar.
Install in Linux OS -SPDriver The SPDriver software features an optical touch control function 1. System requirements For normal optical touch control operation, please make sure the following system requirements are met. Install SPDriver System requirements Operating Linux OS Ubuntu 10.04, Debian 5.05, Suse system 11.3 CPU Intel® Core™2 Duo 2.0GHz or better (dedicated GPU is recommended) Memory 2GB or more Minimum hard 100 MB disk space 2.
Install in Linux OS -SPDriver 3. Initialize the optical touch control function 3.1 Connect your projector and a PC with a USB cable.Your system may look like the Figure shown below. 3.2 C lick the icon and the menu as shown below will display. * Select "About" to show the software version information. 3.3 S elect "Calibration" to execute the calibration procedure. (There is no white background while calibrating.) 3.4 The system saves calibration data after touching the four calibration points.
Troubleshooting Q1: W hy does the message "The LightPen program is not found" appear? A: I t may be caused by the following: (1) Your computer and projector are not properly connected. Please make sure the USB cable is properly inserted in both your computer and projector. (1-1) I nsert the USB cable again if you see the screen as shown below.  (1-2) In case the USB cable is not properly connected to your computer and projector.
Troubleshooting Q2: H ow come the round calibration target does not execute properly? A: (1) Please check whether the pointer or light pen is working: (1-1) Please make sure the pointer or light pen has a battery of adequate power and has been turned on. (1-2) When using the pointer or light pen, please avoid writing in shadow areaa (see figure below) and maintain a 25 degree angle against the projection screen.
Troubleshooting Q3: H ow come the cursor is not located where the light pen is pointed to? A: I t may be caused by the following: (1) P oor system calibration. Please make sure the center of the round target is pointed during calibration. (2) The project location, projection size, or projection distance may be changed. (3) The projection resolution may have been changed. Please calibrate again to solve this problem.
