0 —— Copyright ® View Sonic Corporation, 1999. All right reserved. IBM XT, AT. 386, 486, and PS/2 are registered trademarks and/or trademarks of International Business Machines Corporation. Pentium is a registered trademark of Intel Corporation Macintosh If family, I1}, Quadrant. and Power Macintosh are registered trademarks of Apple Computer, Inc. ‘Windows is a registered trademark of Microsoft Corporation.
Td OCTET || Power Cord Safety Guidelines (continued) AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM | | ! FOR YOUR SAFETY. PLEASE REAR THE FOLLOWING TEXT CAREFULLY, {F THE FITTED MOLDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRIC SHOCK IF THE CUT OFF PLUG 1S INSERTED INTO AN APPROPRIATE SOCKET. At a new plug is to be fitted, please observe the wiring code as dhows below.
CONTENTS For Your Records Power Cord Safety Guidelines . FCC Information .3 CE Conformity .3 Getting Started Package Contents . .5 Precautions Quick Installation* . USB OnView® Host Software Controls aan 5 Operation Front Control Panel OnView?® Main Menu . . QOnView® Controls .. Co Lo. USB OnView® Host Software Controls «ooh 13 ' Other Information Specifications . . S13 Troubleshooting L116 Cleaning the Monitor L117 Limited Warranty L138 Customer Support .
Getting Started Congratulations on your purchase of a Professional Series View Sonic P8135 monitor! Important: Save the original box and all packing material for future shipping needs. NOTE: This product was designed for operating in the region where it was purchased.
ET] —b— || [E— Quick Installation 1 Write the serial number on the back of the monitor in the space provided on page | labeled “For your records” and register your monitor's warranty on the internet at .viewsonic.com. 2 Read the Precautions section thoroughly before installing the monitor. e sue the computer and the monitor are both turned fore connecting any cables. 3a PC users: Amati the Video Cable to a Video Input port on the monitor (see below). Then connect the other end to your computer.
| Quick Installation, continued & To use the USB Hub, connect the supplied USB cable from the USB output on your computer to the USB Input (upstream port) on the rear of the monitor base. 7 Connect any USB device(s) into any of the monitor USB outputs (downstream ports) on the side of the base. a Tum the computer on. Then, press the POWER button on the front of the monitor ON. (The Power light will tum green.) 9 Adjust the user controls to suit your personal preference.
To adjust the monitor, follow the numbered steps in sequence as shown below. Front Control Panel Button [1] {¥1 and (A] Button (2) displays displays scroll up and the control screen main menu down the Main forth highlighted Power ! Menu to highlight control onl Off control to adjust Button {1} exits and [A] Power Light: : noe Emcee Gretel wore saving | and saves increase value of © Mode a sav the selected i adjustments control | OnView® Main Menu Press button [1] to display the Main Menu shown below.
Changes are automatically saved when [1] is pressed. OnView® Controls ao AQ Contrast / Brightness: Press button [2] to toggle between Contrast and Brightness as shown below. Oo Contrast adjusts foreground white level of screen image. NOTE: Pressing the and [A] buttons simultaneously increases Contrast to its maximum. NOTE: You can also access the Contrast control by pressing either or [A] before accessing the Main Menu. “Brightness adjusts background black level of screen image. Press adjust.
Changes are automatically saved when [1] is pressed. Geometry: Press button [2] to select one of the following controls to adjust. IT Vertical Pincushion straightens vertical sides of the screen. curves vertical edges inward, [A] curves vertical edges outward. (I Side Pincushion Balance curves the screen's vertical edges 10 the left or right. { ¥] curves vertical edges to the left, (A) curves vertical edges to the right. [1] Trapezoid makes vertical edges of the screen image parallel.
T) CILIUM Changes are automatically saved when [1] is pressed. User Color Level: adjusts the color intensity of individual colors. [4] increases the amount of cooler in the image, decreases the amount of color in the mage. NOTE: Press button [2] to select the red, green, or bite control. HF] ViewMeter®/ Degassed: Press button (2) to toggle between View Meter and Degassed. View Meter displays the frequency signal input (horizontal scan and refresh rate) coming from the graphics card in your computer.
Changes are automatically saved when [1] is pressed. = Convergence: Press [2] button to toggle between Horizontal Convergence and Vertical Convergence controls. Convergence is affected by geomagnetism. Use this function when convergence emo occurs after moving the monitor or changing the screen angle. Horizontal Convergence Horizontal convergence of the image (color fringing) can be adjusted. NOTE: If the and [A] buttons are pressed at the same time an the H.
| —TT OG COMMITTEEMEN | Self-Tess: When there is na signal input (because the cable is not connected or no video signal is coming from the computer), or the monitor is in power saving mode, the self-test screen can be called by pressing the [1], [A], or [2] button. An error message screen appears when the horizontal or vertical syn signal is outside of the permitted range.
0 OCT USB OnView® Host Software Controls (Continued) Contrast Control = [7 Brightness [Herr] Control mst B CE Ce Ce Contrast / Brightness Control Sub-Menu f= Vertical Size Vertical Position Control Content Horizontal Post ion = | [7 Horizontal Size Control Control Alignment Control Sub-Menu Se Pincushion Carroll | Pin Balance Control TEC) Geometry Control Sub-Menu Red Control I Green Control me Blue Control Factory Preset Color Temperatures User Color ~~ | fess iat fe f= = ViewMatch® Color Control Sub-Menu
Other Information Specifications CAT Type 21" { 20.0" viewable diagonal), 0.
oT) 4 CITY. | Troubleshooting No power «Press Power button ON. Make sure that AIC power cord is securely connected to the back of the monitor and to a power outlet. Plug another electric device (ike a radio) into power outlet to verily that outlet is supplying proper voltage. Power on but no screen image + Make sure halt video cable provided for monitor is tightly secured to video output ort on back af computer.
| SH —o— III mT Cleaning the Monitor + MAKE SURE THE MONITOR IS TURNED OFF. NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. ! To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. * 2 If still not clean, apply a small amount of non-ammonia, non-lughole based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case 1 Use a soft, dry cloth.