Copyright® Viennese Corporation, 1998. All right reserved [8M PCs a registered trademark of International Business Machines Corporation. Macintosh is 3 registered trademark of Apple Computer. inc Windows is a registered trademark of Microsoft Corporation. View Sonic, the three birds logo, On View, View Match, RAGA, and View Meter are registered trademarks, and Super Clear is a trademark of View Sonic Corporation Exert Stan is a registered trademark of the U.S. Environmental Protection Agency (EPA).
® Power Cord Safety Guidelines (continued) pB153 pm AC PLUG CORD PRECAUTIONS FORTH UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. (F THE FITTED MOLDED PLUG IS UNSUITABLE FOR OCKER OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFE THERE iS A DANGER OF SEVERE ELECTRICAL SHACK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET if 2 new plugs to be died, please observe the wi iin any doubt, please consult a qualified electrician.
This section shows how to adjust your monitor for your personal preference. Front Control Panel With your monitor turned on, follow the numbered steps in sequence as shown below.
= WEE] To exit the OnView® menu & save changes, press button [1]. [Ee Contrast/Brightness: Press button [2] to select one of the 3k o following controls to adjust: Contrast adjusts foreground white level of screen image. Press or [A] to adjust. Note: With the Contrast adjustment screen displayed, pressing the and [A] buttons simultaneously increases Contrast to its maximum. Brightness adjusts background black revel of screen image. Press adjust.
To exit the UnView® menu & save changes, press button [1]. Ch Geometry: Press button [2] to select one of the following controls to adjust I I Vertical Pincushion straightens vertical sides of the screen. [VW] curves vertical edges inward, [A] curves vertical edges outward. [V.Pincushion From this screen, press button [2] to display the adjustment screen for the control, then press{¥} or [A]lo adjust. Side Pincushion Balance curves the screen's vertical edges 10 the left or right.
exit the OnView® menu & save changes, press button [1]. ViewMatch® Color provides four color adjustment options: four preset cur temperatures and User (color) which allows you to adjust the reds, greens, and blues. The factory setting for the monitor is 9300K, the color temperature most frequently used in offices with fluorescent lights When you select View Match Color from the On View Main Menu, the screen below appears.
[EEE ETE | To exit the OnView® menu & save changes, press button [1]. Io) The P8I5 is equipped with ports for a 15 pin mini D-sub and a BNC connector allowing you to connect two computers. {A BNC cable is not included.) {X] View Meter displays the frequency signal input (horizontal Sean and refresh rate) coming from the graphics card in your computer. See your graphics card user guide for bore details, To switch between active parts, from the screen shown below, press or [A]. Shortcut.
% To exit the On View” menu & save changes, press bunion [1]. <> Memory Recall returns adjustments back to factory settings only if the monitor is operating in a factory preset mode (see the Specifications sections). Exception: This control does not affect changes made with the User color control where you adjust the reds, greens, and blues HD Video Level allows yeu to change the video input signal level to match the signal coming from your computer. Typically, 0.7V is used.
} [EEE 1 & CEN = To exit the OnView® menu & save changes, press button (1). LE @FOCUS adjusts overall focus of the monitor. To reset FOCUS to the default value, press and [A] simultaneously. Press bunion [2] to select B. FOCUS (Horizontal Focus). w= H, FOCUS fine tunes the hor line focus only. To reset H. FOCUS 10 the default value, press and [A] simultaneously. H. CONVERGENCE: (Horizontal Convergence) adjusts vertical color alignment.
— of SENECA [IRE EE er Information Specifications cRY Type 21° (20.