£ reserved, Copyrigh® Optiguest™, Ine. 1998. A Macintosh, Quads and Power Macintosh are registered trademarks of A Windows is 2 registered trademark of M soft Corporation. te Computer, Tac. Opaquest, View Sonic, On View are registered trademarks of View Sonic Corporation. ENERGY SHARE 18 3 VASE isa are trademarks of Disclaimer. Opaquest in consequential damages re: performance or use this product Opaquest Jac. reserves the right (a change product spec No part wit how prior written perm ion from Opaquest.
power Cord Safety Guidelines {continued) TAC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM | FoR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY, | THE FITTED MOLDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN ™ CUT GFF AND DISPOSED OF SAFELY. THERE 1S A DANGER £ ELECTRICAL SHOCK IF THE CUT OFF INSERTED TO AN APPROPRIATE SOCKET. If a new plug is to be fined, please observe the wiring code as shown below. iin any doubt, please consult a qualified electrician | WARNING: THIS APPLIANCE MUST BE EARTHED.
Congratulate Important! original box and 211 packing material for needs. Also, the ward “Windows®” in this user guide ref ions on our purchase of 2 Opaquest V73 monitor sure shipping c following Microsoft® operating systems: Windows ‘93, Windows '98, Windows NT NOTE: This product was designed for opera purchased.
SINGING Quick Installation 5 Write the serial number printed or the back of the monitor in the space provided on page 1 labeled “For Your Records” and monitor's warranty on the Internet ali 2 Read the Precautions section thoroughly (page 5) before i monitor. Make sure the computer and the monitor arc both t connecting any cables 3a PC users: Attach the video cable to the computer. 3b Macintosh users: A Macintosh computer require Macintosh adapter. “To order an adapter, contact Opaquest Customer Support.
Adjust your Opaquest viii Operation panel as shown below. Front Control Panel To adjust the monitor, folio the numbered steps in sequence as shown below.
PITONS, To exit the On View? menu & save Chan . press button (11 OnView® Controls a en Contrast Contrast Brightness Press bunion [2] 10 tog! and Brightness as shown below. Contrast adjusts foreground white Revel of screen image simultaneously inures NOTE: Pressing the [ 4] and [ P| buttons Contrast to its maximum. NOTE: You can also access the Con intro! by pressing either {4 or before ng the Main Menu, Brightness adjusts background black level of screen ima ]adjust.
“To exit the OnView® menu & save changes, press piston [1]. I edges outward. Vertical Pincushion straighten vertical sides of the screen. [4] curves venial edges inward, | >} curves vertical From this screen, press button [ 2 to display (he adjustment Ta Tor she retired control, then press adjust. to the left or curves vertices: Side Pincushion Balance curves th joint. 4) curves vertical edges to legs, edges Io Tight. Trapezoid makes vertical edges of if en's vertical edges een image parallel.
ton [= x To exit the OnView® menu & save changes, press button [1]. &> Memory Recall rewarms adjustments back to factory seeings only if the monitor is operating in a factory preset mode (page 11). Exception: This control} does not affect changes made with the User color control where you adjust the reds, greens, and blues. 24) Video Level allows you to change the video input signal level to arch the signal coming from your computer. Typically, 0.7V is used.
‘Other Information Specifications “3 cA Type 77 (16.0 */ 40.6 om viewable diagonal) 2 0.25 mm (0.22 mm Kx 0.
@ HEIDI Troubleshooting No power + Truss Power baton (from switch and back s: (teh) ON + Make sure AC power cord is securely connected 10 back of monitor and tw a parer outer. another eclectically device (tke a radio} inch power outlet verify tat cutlet proper voltage. Power on but no screen image + Make sure video cable supplied with monitor is tightly secured 56 video output port on back of computer. If other end of video cable is not attached permanently to compositor, Tightly secure it to moat, ast.
Cleaning the Monitor = THE MONITOR IS TURNED OFF. MAKE SUR! To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dus! other particles. 1 not clean, apply 2 small amount of noi mania, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. Never spray or pour any liquid directly onto the screen of £258 To clean the case, use the same procedure as cleaning the screen. g liquids of any kind on the monitor.
Limited Warranty Opaquest V73 Monitors What the warranty overs: Opriquest® warrants its products to be Ira Prom defects in material) and workmanship curing the warranty period. If a deduct proves lo be effective 1 material Gf workmanship during the warranty period, Opinion west al its sole poplin. repair 0 replace the product with a ike product, Replacement product or parts May include manufactured or refurbished parts or components.
For ViewSonic® Customer Support: U.S. and Canada only From outside U.S. and Canada 909-869-7976 From Europe +44 (1293) 643-900 From Asian/Pacific Rim countries 836 (2) 248-4072 Opaquest Technical Support: Opaquest Product Information: prodigal@ optimistic World Wide Web: hp www.optiquest.eom ViewSonic® Corporation 438 Cheryl Lane, Walnut, CA 91789 Tel (909) 869-7976 Tel (800) 843-6784 Fax (909) 4686-1202 TQBEC242 2.