ong pine Copynght® View Sonic? Corporation, 1998. All right reserved. IBM XT, AT, 386. 486. and PS/2 are registered trademarks and for trademarks of International Business Machines Corporation. Pentium is a wade mark of Fates Corporation. Macintosh and Power Macintosh are registered trademarks and Plain Talk 1s a trademark of Apple Computer, Inc Windows is & registered trademark of Microsoft Corporation.
ang pms Power Cord Safety Guidelines (continued) AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY, IF THE FITTED MOLDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET. 1 a new plug is to be fitted, please observe the wiring code as shown barrow.
ang pm FCC Information “This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Hulas. These meets are designed 1c provide reasonable proficient against harmful Interference in a residential installation. This equipment generates, uses, and can Semite radio frequency energy, and i nol installed and suds in accordance with the instructions, may use harmful incarcerate to radio communications.
CONTENTS Getting Started Package Contents... Precautions Quick Installation Connecting the ViewPanel™ Operation Front Control Panel OnView® Main Menu, Adjusting the Screen... Helpful Hints . .. Other Information Specifications 12 Preset Timing Modes . C12 Troubleshooting 13 Cleaning the View Panel 14 Security Port... . ee 14 Wall Mounting Kit (Optional) So 1s Limited Warranty . . .
ang pmb * Getting Started Congratulations on your purchase of a View Sonic PISS ViewPanel™ monitor. Important! Save the original box and all packing material for future shipping needs.
Quick Installation 1 Write the serial number printed on the back of the monitor in the space provided in “For Your Records” on page 1. 2 Read the Precautions section thoroughly (page 5) before installing the monitor, Make sure the computer and the monitor are both warned off before connecting any cables, 3a PC users: Almach the video cable to the computer. ab Macintosh users: Attach the video cable 10 the computer using the supplied Macintosh adapter.
To adjust the ViewPanel™, follow the numbered steps in sequence as shown below. Front Control Panel = Displays the menu, » Decreases of increases the value of the selected Exits the menu of option from the control screen for that option. control screen, With no menu on serene, fis displays the contrast control! screen and decreases of increases the value of contrast. | ven) Selects ane option to the left or right on Power light: the menu with he menu on screen.
ang pms To exit a screen and save changes, press [MENU] button. (Pp CONTRAST This control adjusts the contrast between the background (black level) and the foreground (white level) of the screen image. Decreases the contrast of the screen image. + Increases the contrast of the screen image. Shortcut To display the contrast control screen without using the menu, press the minus [ | of plus | + | button, Press { — Jor [ +} again to adjust.
ong pmb To exit a screen and save changes. press [MENU] button. {11 VERTICAL SIZE This control adjusts the vertical size (height) of the screen image. « Decreases the height of he screen image. + Increases the height of the screen image. HORIZONTAL FINE TUNE (only 1024 x 768 resolution) This control adjusts the horizontal timing only for 1024 x 768 resolution, See page 11 for more details.
exit 4 screen and save changes, press [MENU] button. Ff AUTO SIZE “This control automatically centers and sizes the screen for you. Press the minus [—or plus [ + 10 select Auto Size ON. The screen image automatically sets self. <> RECALL If the ViewPanel™ is operating in a factory preset mode (See page 12), this control resets the image to the factory settings. If the ViewPanel™ is operating in a user defined mode (See page 12), this control has no effect.
eng pmé Adjusting the Screen “The following setup is required for your ViewPanel™: I. For best performance, sci your computer of video card to 1024 % 768 Resolution, 2. Set your computer or video card 1 a Refresh rate of either 60 or 75Hz. 3. Press the MENU button (See pages 7-10 for more details on cache adjustment). 4. Select AUTO SIZE by pressing the left | < [or right | [> | mow, To activate, press the plus button. 5. Select HORIZONTAL FINE TUNE by pressing the lat right [ > ] arrow.
Specifications Leo Type 157 LuCig™, TFT (Thin Film Transistor), Active Matrix Panel, 0.267 mm pixel pitch RG vertical stripe, Anti-Glare, hard coat input Signal Video Separate. Composite, Sync-on-green, Sync 4,30 61 kHz.
ong pr Troubleshooting No power « Press Power button ON. « Make sure AC power cord is securely connected 10 the back of the monitor and to 2 power outlet + Plug another electrical device (like a raid outlet is supplying proper voltage. Power on but no screen image «Make sure the video cable supplied with the monitor is tightly secured to the video output port on the back of the computer. If the other end of the video cabs is not attached permanently to the monitor, tightly secure it to the monitor.
® Cleaning the View Panel « MAKE SURE THE MONITOR 18 TURNED OFF. = DO NOT APPLY PRESSURE TO THE SCREEN « NEVER POUR OR SPRAY ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE OF THE VIEW PANEL. To clean the screen: 1 Gently wipe the screen with a clean camel hair lens brush, or a soft, clean, Tint-free cloth. This removes dust and other particles that can scratch the screen 2 If still not clean, blow on the screen and gently wipe with a soft, clean, lint-free cloth.
Security Port A security pork can be installed ta prevent theft of the LCD monitor and main unit. A wire cable manufactured by Pennington can be connected to the security port on the rear panel of the main unit.
LIMITED WARRANTY VIEW SONIC VPI50 VIEWPANEL™ What the warranty covers: ViewSonic® warrants its products 10 bo fare from defeats in material snd workmanship during the warranty period. if 3 product proves 10 be defective in material or workmanship during the warranty period, View Sonic will at ls sie option repair af replace the product with a ike product.
For ViewSonic® Customer Support: U.S. and Canada only 1-800-688-6688 From outside U.S. and Canada 909-869-7976 From Europe +44 (1293) 643-900 From Asian/Pacific Rim countries 886 (2) 248-4072 ‘Technical Support Questions Product or Dealer Questions World Wide Weh viewsonic.com View Sonic? Corporation 381 Area Canyon Road, Walnut, CA 91789 Tel (909) 869-7976 Tel (300) 688-6688 Fax (909) 468-1202 TUBE 0281 A 965.22 J05PM Ave Page Maker 6.