User’s Guide 19” LCD Tablet Monitor Series
Safety Information Read all of these instructions Save these instructions for later use, please. 1. Follow all warnings and instructions marked on the monitor. 2. This monitor should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied in your home, consult your monitor dealer or local power company. 3. This monitor is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin.
8. Do not use this monitor near water. For example near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. 9. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 10. Never push objects of any kind into this monitor through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
Contents 1. Introduction and Installing........................................................ 1 1.1 Packing List ..................................................................................1 1.2 Product Overview .........................................................................1 1.3 Tablet Driver Installing .................................................................4 1.4 Software Installation .....................................................................4 2.
1. Introduction and Installing 1.1 Packing List After unpacking, make sure that all of the following contents are included: z Tablet Monitor z Power adapter and power cord z Pen Kits Package z VGA and USB 2 in 1 cable (attached) z User’s guide and Driver CD If there is a defect or missing part, please contact the agency where you purchased the product. 1.2 Product Overview 1.2.
② Power indication: When the monitor is working, the indicator turns steady green. When the monitor is in saving mode, the indicator turns flickering. 1.2.2 Side View ③ Control buttons: ：Power on/off ：Menu and Enter ：Move Adjustment (up) ：Move Adjustment (down) ：VGA output switch ④ Stand: allow you to adjust it to an optimal viewing angle. ④ ③ CAUTION: Make sure the angle of the monitor is at least 10 degrees from the vertical; otherwise the monitor will be unstable and could fall over. 1.2.
⑥ USB cable: Plug it into USB port of your computer. ⑦ DC input: Plug the adapter port to DC input socket. ⑧ VGA output: to external display equipment. (Such as a projector & larger screen display, etc.) HDMI input: to HDMI device. ⑨ VESA mount: this monitor can be hung on the wall with the VESA mount adapter. 1.2.4 Interactive Pen A：Side Button: it is equivalent of right-key of a mouse when you keep the default setting.
1.3 Tablet Driver Installing 1.3.1 OS compatibility 1）Before installing the monitor, make sure your PC Operation System (OS) is Windows XP, Windows Vista, Windows 7 and MAC 10.2.8 or above. 2）Without install Tablet driver for Windows Vista and Windows 7 Premium version or above, they include a Tablet PC application module and already built in your computer with Windows system installing. 1.3.2 Tablet Driver Installing 1) Insert the Driver CD into the CD-ROM; open the “Driver” folder.
2. Setup and Operation Guide 2.1 Recommend Display Resolution The monitor’s native resolution is 1440x900, we recommends using this resolution at a refresh rate of 60 Hz. 2.2 Screen Calibrating and Pen setup 2.2.1 Screen Calibrating 1) After driver stalled, in first time for the operation, and after display mode changed, you will be prompted for information and to do a screen calibration program as below.
Windows 7 (or Vista) system, click the Start icon → Control Panel → select USB Tablet 2.2.3 About pen pressure sensitive 1) The pen support 1024 levels pressure. To draw with pressure, select a pressure-sensitive tool from your application’s tool palette, when you press your pen tip lightly, it will show softer color or thin lines, and press harder for dense color or thick lines.
2.2.4 Pen Battery Recharge The interactive pen with built-in rechargeable battery, when the battery energy deficiency, a red indicator will light which build in pen side button, please uses the product distribution with USB charger for charging, Note: please be sure the polarity of the USB Charger when you to charge up the battery with pen. 2.3 OSD Function and Setup Press “M” button to activate OSD menu: 1）Adjusting: Auto adjust display mode to its utmost performance according to VGA setting.
monitor. 6）Reset: Reset monitor to original settings. 7）Select User Mode：Selects color modes and adjusts red, green, and blue primary colors. z sRGB mode：Sets your screen colors to adapt to the color standards used in the image technology industry. z Native mode：White color a natural tint. z Warm mode：White color a 6500K Reddish tint. z Cool mode：White color a 9300K Bluish tint. 8）Theme mode: Include Normal, View, Film, Game, and Light picture modes, and On / Off select.
3．Troubleshooting If you encounter problems with the monitor, please refer to the following tables. 3.1 Display problems Problems No power No picture Suggested action 1）Check the monitor’s power switch is switched on.
3.2 Interactive Pen Problems Problems Suggested action The pen is no * Check APO whether actives, click pen tip could recall function active status. * Check the battery whether worn out? If yes, please replace the pen battery. * Try using mouse to double check, if mouse also no function, please restarting your computer or your application. * Try to reinstall the USB Tablet driver. Pen nib is too * Check whether the pen nib is too short. If yes, replace the short pen nib.
4．Product Specifications 4.1 Monitor Item Specification Display type 19” TFT Wide / LED B/L Dimension 410.40mm (H)* 256.50mm (V) LCD Resolution 1440×900 Display Pixel pitch 0.2835×0.2835 mm Display colors 16.
4.2 Tablet Item Tablet I/O port Pen Specification Resolution 2048 Lpi Tracking speed 138 DPS Pressure sensitive 1024 levels Accuracy ±0.5 mm(center)，± 3 mm (edge and corner) Communication USB Type Wireless Active mode， rechargeable battery built in Charger USB Charger automatic power Automatic power off actives if off (APO) operating paused and over 20 minutes. Click pen nit could recall active status Note: Specification may be subject to change without prior notice. 4.
5．Appendix Appendix A. Replacing the Pen tip When the tip gets too short or develops a sharp edge, you can replace it with the spare tips. Please follow below step: 1) Use the tip replacement tool to pull the old tip straight out of the pen. 2) Insert a new pen tip into the stylus pen and push the tip until it stops. Note: Tip replacement tool and spare tips are included.
Appendix B. Factory set display modes No. 1 2 3 4 5 6 7 Resolution 720×400 640×480 640×480 640×480 800×600 800×600 800×600 H-Freq（kHz） 31.47 31.47 37.86 37.5 37.88 48.08 46.87 Refresh rate （Hz） 70 60 72.8 75 60.3 72.2 75 8 9 10 11 12 1024×768 1024×768 1024×768 1280×800 1280×800 48.36 56.48 60.02 49.7 62.8 60 70.1 75 60 75 13 14 1440×900 1440×900 55.94 70.64 60 75 Note: Factory set display modes may be subject to change without prior notice.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
