User's Manual
FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules.
TABLE OF CONTENTS CHAPTER 1. OVERVIEW............................................................................................................... 1.1 Introduction................................................................................................................................ 1.2 Features.................................................................................................................................... 1.3 Specifications.......................................................
CHAPTER 1. OVERVIEW | 1 1.1 Introduction WiDiGuard– The Wireless Digital camera sets is a new generation wirelesscamera that eliminated the interferenceproblems usually found with standard analog wireless camera. USB receiver to works with a computer for an inexpensive home security system to make recording and monitoring from single camera to 4 cameras. Unique MSNeyes software function to make you monitoring from remote location via MSN. 1.
CHAPTER 1. OVERVIEW | • Dimensions : - amera C : 82 x 67 x 39 (mm) - S UB dongle : 87 x 33 x 13 (mm) • Antenna : - ender S & Receiver : Omni directional Antenna. - Built-in Antenna. 1.4 System Requirements • • • • • • Windows XP X86/64 / Windows Vista X86/64 / Windows 7 X86/64 Intel Pentium 4; 1Ghz or above or equivalent AMD processor Computer equipped with USB port.
CHAPTER 2. INSTALLATION | 2.1 Camera Installation 1.Connect the camera to the accessory omni-directional bracket and fasten it tight. 2. Loosen the side rotator of the bracket (* over-loosening may cause the camera to fall) and fasten it after setting thecamera a proper orientation for the best surveillance. 3. Stick the accessory screws through the screw hole to the screw shells on the wall. 4.Connect DC5V adapter to DC5V input port 2.
Please click the “WiDiGuard” icon see video window as below: CHAPTER 3. OPERATION | on your desktop. After starting application, you can 4 (1) Display (2) Recorder (3) Snapshot (4) Function (5) Setting (6) Hide Control Panel (7) Minimaize / Full Screen / Exit At the first time to start WiDiGuard, you should match the WiDiGuard Camera and USB receiver frequency first. 1. Go to Setting -> Camera -> Camera Matching Set. 2. Select a camera you want to match. 3.
CHAPTER 3. OPERATION | 5 3.2 Recorder - Recordedone by one when clicking on camera I through IV individually. - InQuad Mode mode, you can still cho ose to record from he t cameras individually; results in one video file for each chosen camera. - Recordedfile save as YYMMDD_hhmmss.avi file name YY : Year; MM : Month; DD : Day; hh:Hour; mm : Minute; ss : Second 3.
CHAPTER 3. OPERATION | 6 (4) If you are unsure of th e exact Date and/or Time, you can stillfind your recorded file by input a Start and End date, and/or Start and End time. - Play: Play the video file you currently selected. (1) Double click the file in the list that you want to play. (2) Choose file and click “Open” to play. - Pause: Pause the current video being played. - Stop: Stop the current video being played.
CHAPTER 3. OPERATION | 7 3.5.
CHAPTER 3. OPERATION | 8 - Detector Sense Mode (Low, Middle, and High): you can select the sensitivity for your camera before activating Motion Detector recording. - Detecting Action: Hereyou can specify what the action will do right after your camera(s) detect any sort of movement - Recording will immediately start when Record is checked. - Select Alarm will play a preset alarm audio file immediately when Motion Detector recording starts. - Alarm Audio File: You can change your Alarm Audio.
CHAPTER 4. MSNEyes | 9 4.1 MSNEyes Software Installation (AfterWiDiGuard install in server computer, you can log in MSN in any other client computer to watch WiDiGuard server computer’s camera in MSN cam window) *WiDiGuard do not support Windows 2000! *Please make sure that WiDiGuard software (see 2.3) and Windows Live Messenger (ver 8.0and above) have both completely installed in server computer before proceeding! 4. 1.1. Launch Windows Live Messenger and log in. 4.1.2.
CHAPTER 5. TROUBLESHOOTING | 10 Q1 : Why can’t my system detect WiDiGuard? A1 : Make sure you enable USB2.0 in the motherboard BIOS setup. Also, please make sure that your system hasthe latest USB2.0 host driver. Q2 : Why does the my system show “High Speed device plug into Full speed USB port…” A2 : Please make sure your system support USB2.0 hardware port.