PORTABLE DVD PLAYER INSTRUCTION MANUAL Model: PDV707KIT / PDV909KIT For technical assistance or troubleshooting please call 1-855-998-4326.
WARNINGS To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. To reduce the risk of electric shock, do not open the cabinet. No user serviceable parts are inside. Refer servicing to qualified personnel. This appliance uses a Laser System. To prevent direct exposure to the laser beam do not open the cabinet. Visible and invisible laser radiation is present when the cabinet is open. Avoid direct exposure and do not stare into the beam.
TOP PANEL CONTROLS 13 12 14 9 10 VOL- VOL+ 4 8 6 OK 7 5 15 16 3 2 1 11 IR *For PDV909KIT the DISC DOOR OPEN Button is located on the RIGHT side 17 19 18 10. SETUP Button 11. DVD / USB / SD Button 12. MODE Button 13. ZOOM Button 14. AUDIO Button 15. REPEAT Button 16. NTSC / PAL Button 17. BATTERY INDICATOR LED* 18. POWER INDICATOR LED* 19. IR RECEIVING LENS* 1. DISC DOOR OPEN Button 2. PLAY / PAUSE Button 3. STOP Button 4. NAVIGATION UP / PREVIOUS Button 5.
REMOTE CONTROL IDENTIFICATION 1 30 20 21 18 17 22 19 26 4 8 5 25 16 28 6 29 23 2 24 14 11 12 10 1. POWER Button 2. PLAY / PAUSE Button 3. STOP Button 4. NAVIGATION UP Button 5. NAVIGATION DOWN Button 6. NAVIGATION LEFT Button 7. NAVIGATION RIGHT Button 8. ENTER Button 9. MENU Button 10. NEXT Button 11. PREVIOUS Button 12. F. FWD Button 13. F. REV Button 14. VOLUME UP Button 15. VOLUME DOWN Button 27 9 7 3 15 13 16. SETUP Button 17. SUBTITLE Button 18. AUDIO Button 19.
CHARGING THE BATTERY This portable DVD player has a built-in rechargeable lithium-ion battery. The battery can be charged by either the AC 120-240V to DC 9V Power Adapter or the 12V Auto-Boat Adapter. Before using the DVD player it is recommended to completely charge the battery by following the steps below. Home Electrical Outlet Use: 1. Plug the supplied AC 120-240V to DC 9V Power Adapter Jack into the 9V DC Input (26). 2. Insert the wall plug of the Power Adapter into an electrical wall outlet.
adjusted by the Remote. Once normal DVD playback begins, you can adjust the VOLUME using the buttons on either the DVD Player or the Remote • To Increase the Volume: o Using the DVD Player: Press the NAVIGATION RIGHT / VOLUME UP / F.FWD button (7) o Using the Remote: Press the VOLUME UP button (14) • To Decrease the Volume: o Using the DVD Player: Press the NAVIGATION LEFT / VOLUME DOWN / F.
• To use Fast Reverse: o On the DVD Player: Press & Hold the NAVIGATION LEFT / VOLUME DOWN / F.REV button (6) § Each time the NAVIGATION LEFT / VOLUME DOWN / F.REV button (6) is Pressed & Held playback will scan backward at x2, x4, x8, x16, and x32 normal speed. o On the Remote: Press the F.REV button (13) § Each time the F.REV button is pressed playback will scan backward at x2, x4, x8, x16, and x32 normal speed.
§ § Widescreen TV 4:3 PS: Will automatically edit and show a Widescreen or other format movie/video as a Full screen image 4:3 LB: Will keep the image in the same format according to the content on the DVD. Widescreen DVDs will be displayed in a letterbox format. o OSD LANGUAGE - Select the language (English, French, or Spanish) used for the On Screen Displays & Setup Menu.
1. KID SAFE 2. G 3. PG 4. PG13 5. PG-R 6. R 7. NC-17 8. ADULT Set Parental Control o DEFAULT – To return the DVD player to the original factory settings, select DEFAULT and the player will automatically return to the factory default settings. • VIDEO SETUP o The Video Setup menu will allow you to adjust the Brightness, Contrast, Hue, Saturation, & Sharpness settings for the picture. These adjustments should be made based on your personal preferences for picture and color quality.
To choose a different Audio Language during DVD playback press the AUDIO button on the DVD Player (14) or the Remote (18). Each time the AUDIO button is pressed the selected audio language will change and the current language will be displayed on the screen. CHANGING CAMERA ANGLES DURING DVD PLAYBACK NOTE: the DVD disc must have multi-angle capabilities for this function to work. To choose a different Camera Angle during DVD playback press the ANGLE button (19) on the Remote.
2. Insert the DVD player into the case with the screen facing out as shown below. 3. Secure the top of the case by closing the velcro straps. 4. Locate the two straps of the case and undo the buckles by pressing the sides of the buckle with your thumb and index finger. 5. Wrap each strap around the Headrest. • For Headrests with a Curved bottom: route the straps between the Headrest Posts. o Cross the straps (as shown below) to create a secure fit.
• For Headrests with a Straight bottom: route the straps on the outside of the Headrest Posts. o Keep the straps straight (as shown below) to create a secure fit. NOTE: The end of the case with the velcro straps must be positioned at the top of the headrest. 6. Insert the ends of each strap into the buckles. 7. Tighten the case to the headrest by pulling the loose ends of each strap. The case should be tightly held against the headrest. 8. Prepare your DVD for playback.
TROUBLESHOOTING PROBLEM Disc will not play • • DVD battery will not charge • • DVD player shut off during playback • • No sound from the speakers • • DVD player only shows a blue screen • No picture when connected to a TV • • Remote does not work • • • SOLUTION Make sure the disc is loaded correctly with the label side facing up Make sure the disc is not dirty, cracked, or scratched Try another disc Make sure the AC adapter is securely connected to the 9-12V DC Input (26) Try another electrica
LIMITED 90-DAY WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a ninety-day period from the original date of purchase from an authorized VIDAO dealer. Should you be missing any of the included accessories or other components (screws, pieces, etc.), please contact the Customer Support Center to secure a replacement. It is not necessary to bring the unit back to the store.
Schoenfeld International Inc. and VIDAO 5001 American Boulevard West Suite 275 Bloomington, MN 55437 ©Schoenfeld International Inc. 2014 PN: PDV707KIT/PDV909KIT Rev. 1.