User's Manual

15W Fast Wireless Charging
Roller Car Phone Holder
User Manual
Arm clamp
Reset button
Charging Indicator
Silicone roller
1.Rotate the chuck ball shaft to the
charger to ensure that the charger can
rotate flexibly
2.Input power supply: Connect the
charging adapter and charging
wire to the charger,adn the indicator
light is to indicate that the
charger start to work
arger
to e
charg
tate
flexi
bly
4.Push the reset button , the clamp
will be released. Place phone in
jaws and push the clamps until
phone is held securely.
5.Place phone slantly. Push the
other side of phone to the
jaws along the roller
6.To remove phone, slightly push the
right roller and easily take out
phone along the roller
(1) Fits for Qi standard mobile phones;
(2) Support 15W fast charging , as well as 10W / 7.5W /5W
wireless charging;
(3) Push the reset button , and place phone in jaws slantly
then push the clamps to hold the phone securely;
(4) The arm clamp can be flexibly extended, so it is easy to
hold different mobile phones;
(5) Fixed the clip clamp at the air vent outlet of the car,
it can be adjusted 360° in 360 degrees to the
direction of your phone;
(6) This wireless charger comes with over-current protection,
overheat protection, short circuit protection;
(7) Product certification: FCC, CE, ROHS
Material:ABS + PC
Input power:5V2A, 9V/2A
Output power:15W (Max)
Effective Distance of Wireless Charging:3-6mm
&RQYHUVLRQHIILFLHQF\VWDQGDUGFKDUJLQJIDVWFKDUJLQJ
Working frequency:110-205KHz
Warranty instructions
12 months warranty from the day of purchase;
Do not open or disassemble the product by yourself,
it may cause damage to the product and invalidate
your warranty service.