Operation Instructions

ManualsBrandsvictsing ManualsElectronicsFM Transmitter

Manual of bluetooth car charger BH269A

Thanks for purchasing our bluetooth Car

charger with FM transmitter! This manual is written to

help you to learn how to use the product. Please read

the manual carefully before use.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions,may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

-Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV

technician for help

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

I. Product Profile

This product is a car-specific car bluetooth player,

built-in advanced bluetooth and WMA.MP3, APE,

FLAC decoder chip, can play music files inside U disk,

wirelessly transmitted to car audio, no need to modify

your car can easily Make your music enjoy while

driving. More important is the purity and clarity of the

special sound of DSP technology. We hope to bring

you unlimited enjoyment of the music.

II. Product appearance

Schematic description:

1. PD3.0 output

2. USB1: 2.4A/U disk

3. LED display

4. Short press: Previous/Long press to enter mode

switching (BT/USB/TF)

5. Play / pause / answer / call back / Long press to

wake-up SIRI / Left and right rotation to adjust the

volume

6. Short press: next song / long press to enter FM

mode

7. MIC

8. USB2: 2.4A

9. LED lampshade

10. TF card slot

11. Short press the colorful light button to switch/long

press the LED breathing mode

12. Subwoofer sound button

13. Cigarette point and shrapnel

III. Features:

1. Suitable for all types of vehicles

2. LED display

3. Support PD3.0 fast charge output

4. Support USB Type-C/PD3.0/Huawei

FCP/SCP/Samsung AFC/QC3.0/

QC2.0/iPhone 2.4A/USB BC1.2 DCP protocol

complied

5. Support stereo FM transmission technology

6. Support U disk play

7. Support TF card music player

8. Support WMA, MP3, WAV, APE, FLAC music

format files.

9. Automatic power off memory function

10. bluetooth supports A2DP, AVRCP, HFP, HSP

11. bluetooth bluetooth V5.0

12. bluetooth hands-free calling

13. Support bluetooth stereo music DSP technology

14. Support subwoofer output

15. Car battery voltage detection

IV. Operation Instructions

4.1.1 Plug the product into car cigarette lighter socket

while it will be automatically power on with LED

flashing and displaying HI→Battery Voltage→BT→FM

frequency

4.1.2 Turn on your car FM radio, and adjust the

frequency of product same as your car radio, then your

can enjoy music from your car stereo.

4.1.3 Adjust FM frequency

Long press to enter state,

Then press and to adjust the frequency from the

FM 88.1 to 107.9Mhz, three seconds without operation

to exit the FM state.

4.2 bluetooth Pairing

When connecting the product with the mobile phone at

the first time, it may need pin code to finish the

connection, for more details, please refer to the

relevant manual.

Summary of content (3 pages)

PAGE 1
Manual of bluetooth car charger BH269A Thanks for purchasing our bluetooth Car charger with FM transmitter! This manual is written to help you to learn how to use the product. Please read the manual carefully before use. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 2
1.Please open bluetooth on your mobile phone and search for the device “Carkit” from phone menu list. 2. Select the device "Carkit" 3. Select "Carkit" in the menu of the phone, and select device as "Trust device" in the authorized device. V. Matching connection of additional equipment At boot time, the bluetooth car hands-free will only automatically start connecting to the matching device that was last connected.
PAGE 3
There is noise but no sound 1. Whether the product player is in a pause state 2. Is the volume adjusted to 0 or small? The audio of car can't receive sound 1. Make sure that the product FM launch has been turned on. 2. Is the transmission frequency of the product the same as the reception frequency of car’s? 1. Make sure that there is no strong signal station at the frequency of the current transmission. When using it, adjust to the frequency of no radio station to get better sound effect.