Model: VH-25 WOODLAND BLUETOOTH SPEAKER CREDENZA
CONTENTS IMPORTANT SAFETY INSTRUCTIONS..................................................................................... 2 ACCESSORIES INCLUDED........................................................................................................ 4 ASSEMBLING YOUR FURNITURE ............................................................................................ 5 INSTALLING THE TIPPING RESTRAINT ................................................................................... 7 POWERING THE UNIT..
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions - All the safety and operating instructions should be read before this product is operated. Keep these instructions - The safety and operating instructions should be retained for future reference. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions - All operating and use instructions should be followed.
16. The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 17. CAUTION: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus. 18. Use the equipment in a moderate climate. 19.
ACCESSORIES INCLUDED Unpack the box and verify that the following items are included: Main Unit Screws A #1 X1 Handles X4 Touch-up Pen B X1 #2 X2 Unit Legs Small Screwdriver C #3 X4 Power Cords X1 Tipping Restraint Pack * D X3 #4 RCA Cable E X1 X1 * One set includes 1 safety strap, 2 buckles, 2 rubber stoppers and 4 screws.
ASSEMBLING YOUR FURNITURE IMPORTANT NOTE: Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. Two people are recommended for assembly. Step 1: Installing the Handles Using the included handles, attach the handles into the doors’ holes as shown. Tighten two screws (included) from the inside of the doors into the handles’ holes. (See picture inset.
Repositioning the Shelf 1. 2. 3. Take out the shelf by removing the screws. Adjust the shelf supports to your preferred position. Put the shelf on the shelf supports and tighten the screws to secure the shelf in place. Note: Make sure to adjust all 4 of the included shelf supports/screws.
INSTALLING THE TIPPING RESTRAINT Installing the Tipping Restraint helps to prevent the unit from tipping over. * One tipping restraint package includes 1 safety strap, 2 brackets, 2 anchors and 4 screws. Safety Strap X 1 Anchors X 2 Brackets X 2 Screws X 4 Installing the Tipping Restraint Pack 1. Determine the unit’s location in the room. 2. Figure out the placement of the tipping restraint bracket on the wall and mark the screw holes. 3.
POWERING THE UNIT CAUTION: Only use the AC Power Cords supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cords or power supply may cause damage to the device and void your warranty. 1. Insert the AC Power Cord (included) into the AC INLET (AC IN) of the unit. 2. Connect the correct power cord to the wall socket. NOTE: Three power cords with different plugs are included. Depending on your region, select and use the appropriate one.
PRODUCT OVERVIEW Control Panel 1 1. 2. 3. 2 34 5 NEXT • Press to go to the next track. Note: Function only supports Bluetooth and USB modes. • Hold the button for 3-5 seconds to increase the volume level. 6 8 9 10 11 12 13 6. AUX-IN JACK (R) / 7. AUX IN JACK (L) 8. COAXIAL-IN CONNECTOR 9. OPTICAL-IN CONNECTOR PLAY/PAUSE, PAIR • Press once to pause the playback, press again to resume. Note: Function only supports Bluetooth and USB modes.
LED STATUS Status LED Indicators (Hidden behind speaker grill) LED Indicator-1 LED Indicator-2 Standard LED Status Device Operation Mode LED Indicator-1 Action LED Indicator-2 Action Standby Mode RED (solid) – Searching/Pairing: BLUE (blinks slowly) – Connected: BLUE (solid) – AUX-IN Mode – ORANGE (solid) Optical Input Mode – WHITE (solid) Coaxial Input Mode RED (solid) WHITE (solid) HDMI (ARC) Mode PURPLE (solid) – USB Playback Mode BLUE (solid) ORANGE (solid) Bluetooth Mode Not
REMOTE CONTROL Button Function 13 1 1. STANDBY/ON-OFF • Turn ON the unit or switch the unit to Standby mode. • Hold the button for 3-5 seconds to set as the Primary unit. (Bluetooth Multi-Pair mode only) 2. MUTE 2 3 4 5 6 • Press Once to cut the playing volume in half. • Press Twice to mute sound completely. • Press a Third time to resume playing volume. 3. PREVIOUS / 7. NEXT • Go to the previous/next track. Note: Function only supports Bluetooth and USB modes. 7 8 9 10 4.
GENERAL OPERATIONS POWER ON THE DEVICE Select an appropriate power cord (included) and plug it into the AC INLET (AC IN). Switch the POWER SWITCH to ON. It is strongly recommended that this product should be operated only from the type of power source marked on the rating label. STANDBY Press the STANDBY/ON-OFF button on the panel or remote control to turn on the unit or enter Standby mode.
USB OPERATION USB Playback: 1. Press the MODE button on the panel or remote control to enter USB mode. Once entered, the LED Indicator-1 will be lit up in solid Blue and the LED Indicator-2 will be lit up in solid Orange at the same time. Plug the USB memory stick (not included) into the USB PLAYBACK PORT on the unit. It will detect and playback automatically. Control the playback from the unit or remote. Now you can enjoy the music from your USB. 2. 3.
HDMI OPERATION HDMI (ARC) The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to your unit through a single HDMI connection. To use the ARC function, please ensure your TV is ARC compliant and set up accordingly. The setting method of ARC may differ depending on your TV model. For details regarding the ARC function, please refer to your TV owner’s manual. Using HDMI (ARC) 1.
CONNECTING OTHER DEVICES Connecting an audio playback device Connect to COAXIAL-IN, OPTICAL-IN or AUX-IN input to an audio playback device (CD player, portable music player, etc.) using the appropriate cables. AUDIO OUTPUT COAXIAL OPTICAL OUTPUT OUTPUT Audio Device AUX-IN OPERATION 1. Press the MODE button on the panel or remote control to enter AUX-IN mode. Once entered, the LED Indicator-2 will be lit up in a solid Orange color. 2. Connect the unit with an RCA cable (included).
BLUETOOTH MULTI-PAIR FEATURE This unit can pair with over 8 Victrola furniture pieces simultaneously for total surround sound. How to Set Up Two Or More Units with the Bluetooth Multi-Pair Feature: 1. 2. Power on only one unit (The unit you want to set as your primary). Hold the STANDBY/ON-OFF button on one of the speakers for 3-5 seconds to set it as the primary unit. The two indicators on the primary unit will be with different actions in different playback modes when successfully set.
Operation Mode While Using Bluetooth Multi-Pair: (Make sure to set your primary and secondary units FIRST! See page 16) IMPORTANT: • The mode can only be switched on the primary unit. If you change the mode on the addtional unit, the Bluetooth Multi-Pair connection on the additional unit will be disconnected automatically. • The volume level for the primary and additional unit is independently controlled. They need to be adjusted separately.
OPTICAL OPERATION: 1. Press the MODE button of the primary unit to enter Optical Mode. The white LED indicator on the primary unit will light up and start blinking. 2. Use a digital optical cable (not included) to connect your television’s optical digital output to the OPTICAL INPUT JACK on the primary unit. Other components connected to the television, such as a DVD/Blu-ray player or cable/satelite tuner, will automatically play through the primary and additional units at the same time.
SPECIFICATIONS GENERAL Power Requirements.......................................................................... AC 100-240V~50/60Hz Power Consumption .......................................................................... 80W Unit Dimensions ................................................................................. 47.25W x 15.7D x 30.6H (inches) ........................................................................................................... 1,200W x 399D x 777H (mm) Unit Weight ...
TROUBLESHOOTING GUIDE BLUETOOTH MULIT-PAIR BLUETOOTH GENERAL Symptom Possible Cause Solution • Unit will not power on. • Unit is unplugged. • Connect the unit to the AC power supply. • Unit will not turn on. • Power switch is not turned on. • Turn the power switch to On. • No sound output from speakers. • The volume level is set too low. • Mute the sound. • The input selector does not match the playback source. • Adjust the volume. • Cancel the mute function.
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Victrola is a registered trademark of Innovative Technology Electronics LLC. Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable.
