BRED 3 $I: N ved cw OPERATING INSTRUCTIONS 3 BASIC OPERATIONS +.
¥7:31 BE GT-030-6T 2H Ld Headphone Jack Power Onion Battery Indicator Monitor On/Off Rawer On/Off Button Button Push To Talk Volume Down Button Button Channel Selector Belt Clip Button Microphone ee Battery Compartment 2. Inge rt {or remove) the 3 “AA” batteries, Nita: Make sure the battery + and terminals are aligned as shown. 3. Close the cover. The transceiver requires 3 “AA” batteries. Use high quality alkaline batteries to enjoy longer periods of battery lite.
1. To remove the clip, (um the screw counterclockwise unt 1. Press the POWER switch {or mare you can remove the clip. . than | second 10 tum ihe transceiver power ON. The Power On Indicator 681-030-562 a will flash every 2 IN seconds. 2. Align the screw and the clip with the screw hole, and tum 2, Press the VOLUME UP button to the screw clockwise to attach the clip. Do not over tighten Increase the volume ar press the screw. : the VOLUME DOWN button to decrease the volume.
£563-030-5C S1:97 #46 43rd 3. Frogs and hold the Channel button for one second to select between the per-programmed channels (A or B). The appropriate indicator will light up. « You mus! select the same channel as your group members have selected. Ch. Freq. (Mhz) A | 467.5625 457.6625 4.To make a call, press and hold the PTT (Push To Talk} switch, then speak into the microphone In your normal speaking voice. : * Hold the transceiver about 2 to 3 inches away from your lips. 5.
The Monitor function untie CALL Function will send an audible tone like a ¥ in mutes the speaker in any telephone ring to another transceiver. iN B situation. Use this function + You have io select the same channel 2s your group 8 0 when received signals are members select. In a too weak to recognize or 1. Press and hold the PTT 8 G when you want to adjust (Push To Talk) switch. W the volume while just 2. Press and hold the VOLUME Ul fastening to background button for several : poise.