User's Manual

901 GMRS User Manual V 1.0
Date : 2003/9/19 Page 1
901GMRS User Manual Prelim
OPERATION BUTTONS :
 POWER

PTT
 UP

DOWN\
 MODE

MONITOR
 SCAN/LOCK

CALL
Features and Operating Procedures
Turn the Radio ON/OFF
1. Press and release
[POWER].
The display will appear (all segments
will turn on for 1 second)
2. The LCD display will show the current channel number.
3. To turn the radio off, press and hold
[POWER]
for 1 second until the
display clears.
Adjust the Volume
1. In normal operating mode, press the
[UP] or [DOWN]
buttons to raise or lower the radio’s
volume.
2. The radio will beep to indicate the volume level is changed.
Key Tones
1. The Key tones (press any key, except the
[PTT]
and
[MODE]
button) on the radio are at fixed level and are not
affected by changing the radio’s volume
2. The
[PTT]
and
[MODE]
button does not have key tone.
3. If speaker is enabled, there will be no key tone for
[UP] or [DOWN]
keys.
Change the Channel
1. From the normal operating mode, press
[MODE]
button once to enter the channel selection
menu. The CHAN indicator will begin to flash and the radio’s current Channel will be
shown.
2. Use the
[UP] or [DOWN]
buttons to select a new channel (1-22) while the CHAN indicator is
flashing.
3. The radio will return to the normal operating mode after 10 seconds or when you press the
[PTT]
button or press
[MODE]
several times back to normal operation mode.
Change the CTCSS Tone
1 From the normal operating mode, press
[MODE]
2 times to enter the CTCSS selection
menu. The CTCSS indicator will begin to flash and the radio’s current CTCSS will be
shown.
2 Press the
[UP] or [DOWN]
button to select a new code while the CODE icon is flashing.
(Codes 1-38 are selectable. If you don’t want this code, set it to ‘--’).
3 The radio will return to the normal operating mode after 10 seconds or when you press the
[PTT]
button or press
[MODE]
several times back to normal operation mode.