Installation Manual EN Super Bass Extreme Ultra
EN MATERIAL NEEDED Included Silicone Drop x4 Super Bass Extreme Ultra x2 Stacker x2 Gauge x1 Not Included Level Super Bass Extreme Base x1 Drill Wall Plugs and Screws x12 Flexi Glue Ultra VicFix J Profile 80mm | 3.
EN Stand Alone Assembly D C B A
EN 1 Step by step corner installation. 1.1 1.2 1.3 1.
EN 2 2 1 3 2 1
EN Ceiling Installation 1 2 Apply Flexi Glue Ultra on the back of the bottom panel of the Super Bass Extreme Ultra, near the edges. Do not wait longer than 10 minutes after applying the glue to attach the panel to the wall. Place the panel on the suitably chose position on the wall. Once in the desired place, press firmly against the wall for 15 seconds.
To ensure that you maximise the strength of the glue, don’t make any adjustments to the panel after bonding. Wall and ceilling surfaces should be examined prior to installation, ensuring they are clean, smooth, and dry. If you have unpainted gypsum board surfaces, these should be primed with a drywall primer (or another material manufactured especially for the purpose), to equalize the absorption between the gypsum board face paper, joint compound, and skin coating materials.
Main Office, R&D & Logistics Avenida do Pólo 3, Nº 159, Carvalhosa 4590-137 Paços de Ferreira, Portugal T (+351) 255 136 746 Office Rua Quinta do Bom Retiro Nº 16, Armazém 9 2820-690 Charneca da Caparica, Portugal T (+351) 212 964 100 Info and Sales E sales@vicoustic.com www.vicoustic.com © Vicoustic, 2019 | V2 No parts of this document might be copied and/or published without written consent of Vicoustic.