Installation Manual EN Flexi Wave Ultra
EN
EN MATERIAL NEEDED Included Silicone Drop x12 FlexiWave Ultra x6 Gauge x1 VicFix J Profile 80mm | 3.14" x12 Not Included Level VicFix J Profile 2m | 78.
EN Vertical Wall Installation Horizontal Wall Installation Ceilling Installation
EN 1 Step by step vertical wall installation. 1.1 1.2 1.
EN * This product can also be installed on the wall in the vertical position with the VicFix J Profile 2m (sold separately). 1 Step by step horizontal wall installation. 1.1 1.2 1.
EN 2 68cm | 26.
EN 4 2 1 5 2 1
1 ≥ 61cm | 24.0'' 2 EN Step by step ceilling Installation: For Ceiling Installation you must buy the VicFix Gauge and VicFix J Profile 2m.
EN 3 4
! EN 5 Please note: For ceiling installation do not use the VicFix J Profile sections supplied with the product. Use the VicFix J Profile 2m, sold separately. It is recommend to leave some centimeters beyond the last panel to avoid it to loose contact with the VicFix J profile. In countries where earthquakes are likely to happen, it should be applied a blocking element such as a L profile to avoid the last panel to slide off the VicFix J profile.
Main Office, R&D & Logistics Avenida do Pólo 3, Nº 159, Carvalhosa 4590-137 Paços de Ferreira, Portugal T (+351) 255 136 746 Office Rua Quinta do Bom Retiro Nº 16, Armazém 9 2820-690 Charneca da Caparica, Portugal T (+351) 212 964 100 Info and Sales E sales@vicoustic.com www.vicoustic.com © Vicoustic, 2019 | V2 No parts of this document might be copied and/or published without written consent of Vicoustic.
