User's Manual Part 2

WiFi Advisor Safety Information
December 2014 22073762, Rev 0001 Page 1
WiFi Advisor Safety Information
Important safety instructions
When using the product, basic safety precautions should always be followed to reduce the
risk of fire, shock, and injury to persons, including the following:
1 Read and follow all warning notices and instructions marked on the product and
included in the manual.
2 Use only the AC Adapter/Charger supplied with the product. Do not use AC Adapter/
Charger outdoors or in wet or damp locations. Connect the AC Adapter/Charger to
the correct mains voltage as indicated on the ratings label.
3 This product is intended to be used with a 3-wire grounding-type plug (a plug that has
a grounding pin). This safety feature is vital to the safe operation of the instrument.
Do not defeat the purpose of the grounding-type by modifying the plug or using an
adapter.
4 Use appropriate cables when connecting to telecommunications circuits. Putting an
RJ-11 connector in a RJ-45 port can damage the RJ45 port.
5 WARNING:
Danger of extreme heat, fire, or explosion if battery is tampered with.
Replace only with JDSU battery 21129596 (catalog number WFED-BATTERY).
Dispose of used batteries according to the manufacturer's instructions.
6 Do not expose the battery to high temperatures above the rated maximum of 60°C or
140°F.
7 Do not attempt to service this product yourself. Refer all servicing to qualified service
personnel.
8 CAUTION: If the equipment is used in a manner not specified by JDSU, the protec-
tion provided by the equipment may be impaired.
9 Charge the lithium ion battery using only the JDSU battery charger. The battery is to
be used only with JDSU test products.
10 Please see “Safety symbols” for safety symbols. Where the unit or battery is labeled
with a warning symbol, the operating manual must be consulted to learn more about
the nature of the potential hazard and any action that must be taken.
Save these instructions