Installation Sheet

For assistance call
1-800-522-7336
Monday–Friday
7am–5pm MT
or visit www.ViaggioHardware.com
PK192 06072020
DOOR HARDWARE INSTALLATION INSTRUCTIONS SINGLE CYLINDER DEADBOLT
NOTE: Deadbolts  t doors 1-3/4” to 2” thick. For thicker doors, please contact Customer Support.
G
#11
#13
#3
#12
Door
Stop
Door
Jamb
Install Jamb
Strike Plate
#
10
F
Inside
of Door
Thumbturn
Assembly
5/8”
rews
9)
Attach
Screws.
Door Inside
Thumbturn
Assembly
with Included
Machine Sc
(Part #
Outside Assembly (Part #’s 4, 5A & 5B )
Deadbolt
Adaptor Plate
(Part #
6)
2-3/8”
Machine Screws
(Part #
7)
2) Attach Deadbolt Adapter
Plate With Included Screws
1) Place Outside
Assembly on
Door Outside
Door Outside
E
D
Tailpiece must be
VERTICAL during
installation.
!
#4
#
5A
#5B
Install
Cylinder
Into
Outside
Plate
#
5A
5A
Deadbolt Tongue must
be EXTENDED during
installation.
Deadbolt Latch
!
Edge Bore
Hole
Deadbolt Latch Tongue Note
C
B
For 2-3/8” Backset
3-1/2”
2-3/8”
3-3/4”
2-3/4”
Cross Bore
Hole -
2-1/8”
Diameter
For 2-3/4” Backset
Door Thickness
Centerline
Edge Bore
Hole - 1”
Diameter
Faceplate
Mortise Area
For 2-3/8” Backset
3-1/2”
2-3/8”
3-3/4”
2-3/4”
Cross Bore
Hole -
2-1/8”
Diameter
For 2-3/4” Backset
Door Thickness
1-3/4” to 2”
Centerline
Edge Bore
Hole - 1”
Diameter
Faceplate
Mortise Area
A
USE INCLUDED PREPARATION
TEMPLATE FOR NON-PREPPED DOORS
Face of Door
Edge
of
Door
Centerline